How is the electrical polarity of male jack cigarette charger?

I'll forgo the obvious off color jokes
But the question really doesn't makes sense. What is it you are trying todo?

Similar Messages

A way how to fix the Zen Micro head phone jack prob

Hi! I am one of the many people that purchased a Zen Micro MP3 player, I loved it until around 6 months of use, an audio shorting problem with the head phone jack, started to repeat it's self every time, that I would plug my head phone's into the Zen Micro head phone jack. After awhile, I was tired of this problem, so I just decided to never use it again, unless I could find out if the maker of the Zen Micro had a repair service. I noticed that some people had their Micro's replaced a few times under the warranty that is included with the player. I also noticed that some one created a way to fix this problem, but I wanted to see if I could find an easier way to fix the problem. Well I did end up finding an easier way to fix the problem, this is what I did.
Absolutely in all means I can't be held responsible / reliable for any unforseen thing / things, that you may or could, do to the Zen Micro, by following the instructions, which I provided. By trying what I did by following the instructions, which I provided you; you accept all responsibility to any thing / things, that may or could happen to the Zen Micro.
The Instructions:
I took a stapler pressed it down to get a used staple then I carefully inserted it in the outer part of the plastic head phone jack ring. Then I pressed the rest of the staple flat against the Zen micro. And Now I get great sound, it is at least better than, the way it was before I inserted the staple. I would suggest to always remove the staple. When you connect the Zen Micro to a computer, charging device, or any other device other than a pair of head phones. You understand that if you leave the staple inserted in the Zen Micro and don't remove it. While you have it connected to a computer, charging device, or any other device, or devices, even a pair of head phones, and some thing happens, you can't hold me responsible.
If you would like to see a photo of how it looks please reply to this message and just include your email address please. I will send it to you as soon as possible. The photo has 4 photos sized down to perfectly fit on one photo, so you can get a good idea of what it should look like.
Message Edited by theZenDude07 on 02-28-200707:45 PM

Thank you for the information, can I please have the photos so I dont destroy it entirely !. Take care,?Simon?(Dublin, Ireland)

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to go for the Log Polar Conversion of the image.

How to go for the Log Polar Conversion of the image.

Hi,
I'm not sure if you mean using the polar plot vi, but if so there is an example shipped with LabVIEW. Go to Example Finder and search for 'polar', and you should find Polar Plot Demo.vi. Also, here are some useful links:
Link 1
Link 2
Hope this helps!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

How to display electric bill on web ??

HI experts
My issue is from ISU-Electric Distribution Company; its having a good consumer base. management wants to display the ELECTRIC-BILL through webinterface.so any one can suggest me in general ISU what all are the ways and means required to do that
Is it possible through?
1.ISU is havg a concept Internet self service concept is any one can share some knowledge about this technology, the implementation methodology, any document to support, and blueprint to support, or the steps and ways to configure it
ISU-CCS-Internet Self Service
2.Is it possible through Enterprise portal so how and what all r the implementation methodology in that and is it the standard solution for such scenario.
3.What ultimate steps as a tech person recommend is to fetch and made 4-5 ABAP-REPORTS which will fetch the data and upload it to preexisting WEBSITE of the company.
Gaurav

Hi,
You could use something like this.
get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager
report message
CALL METHOD lo_message_manager->report_success
    EXPORTING
      message_text              =
     params                    =
     msg_user_data             =
     is_permanent              = ABAP_FALSE
     scope_permanent_msg       = CO_MSG_SCOPE_CONTROLLER
     view                      =
     show_as_popup             =
     controller_permanent_msg =
     msg_index                 =
     cancel_navigation         =
     enable_message_navigation =
    receiving
      message_id                =

How can i get out my headphone jack out of iphone 5c

how can i get out head phones jack out of my iphone 5c

You have to connect to a computer with iTunes following the instructions in http://support.apple.com/kb/HT1808

What to Do with the Electric Shocks Coming from my Mac Book Pro?

Hello there,
I have these tiny electric shocks each time my forarms come into contact around the plastic frame around the keyboard side of the notebook.
Sometimes the elecric shocks are not there. But they appear regardless of whether I'm using the grounded cable or not; regardless of which prephirals connected to the notebook; and in multiple buildings.
When I went to the reseller the electric shocks where not there.
Does Apple know about such a problem? isn't there a policy around this specific problem? I saw that other users reported the same issue on an external website.
I still have my product in its one year warranty.
Any clue?
Thanks in advance,
Nader
MacBook Pro Mac OS X (10.4.10)

I use the 3 prong lead and I still have the tingle; but sometimes it disappear in the same place (same electric plug). How do you explain that?
Thanks again.
A1150 Mac Book Pro Mac OS X (10.4.10)

How should the TL be reporting on the CR?

1)Default on modification which was executed post CH7 discharge, never reaffirmed and no further monetary liability.After mod. default TL’s continued to report CH7 status, closed account, 0 balance, etc. for several years (which appeared to be correctly reporting). 2)Now, a few years after the mod. default, one TL is reporting status as open, late, foreclosure after co-signer filed a CH7 last year which then was subsequently converted to CH13 this year, approved by the courts with the case now closed. How should the TL report for 1)? I thought it would continue to report CH7 status, closed account, 0 balance, etc. for party 1) I am trying to understand how the reporting should take place on a co-signed note and mortgage when both signers have filed as described above. Thank you for your input.

There are several AirPort models, but your Internet Service Provider modem should jack into the circular looking icon, and any local ethernet cables (if any) should jack into the double arrow looking icon. Hook 'em up, shut everything down, then power them up in order: ISP broadband modem, AirPort, computers.
http://tidbits.com/article/8813.
One caveat, does your ISP's modem provide DHCP/DNS/wireless services? If so, then your AirPort needs to not duplicate those services.

How diagnose the extra SATA ports on the Mac Pro (early 2008) logic board?

I have had two SSDs in an OWC multi-mount in the second optical bay, one for Lion and one for Photoshop scratch. However, I recently began having intermittent boot problems. Sometimes there wouldn't be an Apple symbol upon boot/reboot, yet sometimes there would and the computer would boot. I have not experienced any crashes, kernel panics or such.
I thought the Lion SSD was faulty so installed Mountain Lion on the scratch drive, a Mercury Electra 3G which I have recently received as a replacement from OWC due to a previously faulty SSD. However, immediately there were boot problems from that SSD.
I have a feeling there is something wrong with the two extra SATA ports on the logic board. I am now booted off the Lion SSD placed in an external USB enclosure, which works but is a bit slower (I will get a bracket to install that SSD in the ordinary internal bays).
My question is how I can diagnose the logic board generally and specifically the extra SATA ports. I have Tech Tool Pro 6. I also thought I had AHT but on the Leopard DVD 1, which came with the Mac Pro (10.5.2) and on which AHT is supposed to be there is no trace of AHT. Odd. Booting from that DVD will only bring up the Leopard installer.
Btw I do think the Electra is broken because I am unable to boot ML from it in the USB enclosure.
Grateful for any ideas how to check my logic board.
Cheers
/p

If you could move the drives easily to another location then you could test the drives and also - make backup images! just to be safe. SSDs and their firmware and problems are almost all too common, even this last June a large issue with SandForce which OWC uses in some/most of theirs, and I get the feeling they are usually behind in testing and sending out firmware updates.
Corsair, Crucial and Intel have all had issues since it surfaced in May.
Diagnosing a motherboard with Apple Service Diagnostic CD is one thing. Swapping out SATA cables though no. WD Lifeguard does check communication to an SATA device drive and can - but you need to see the device in Windows or their boot CD (linux I imagine). Quite good utility though maybe not for an SSD.

I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

I'd recommend that you check for Mac User Group(s) in Orange County. That's where you'd likely find a diehard Mac fanatic who might want to add your 6500 to his/her collection. Even if you got nothing for it, it would be better than e-cycling it. I upgraded my 6500/275 with what was a "large" hard drive at the time (15 GBs), maxed the memory at 128 MBs, installed the 512K L2 cache card, a better ATI Rage Pro PCI graphics card, a USB PCI card, and an internal 56K modem. With it running OS 9.1, it did all of the pre-OS X stuff I needed it to do. As I previously mentioned, it's a nice-sounding MP3 player. Internet Explorer 5.1.7 (the final release from 2001) kept it useful for surfing the web up until 2005, when it became too outdated/incompatible with many web sites. Unfortunately, the demands of the internet and the need for a modern browser, as well as faster processing to digest it all, are what retired many older Macs from active duty. So my (2) 6500s and (3) 6400s (same tower design) sit in storage. There is one concern that I'll pass along: The motherboard has a 4.5-volt alkaline battery, that's a small, black plastic cube, secured in place by velcro. If your 6500 has been disconnected from electricity for a long time, the battery will undoubtedly be dead. Unlike the many Apple computers that used a small ½AA lithium battery (that I've never seen leak when completely dead), the 6500's battery can and usually does start leaking. Because the motherboard sits vertically oriented on its side edge when installed, the leaking battery will drip alkaline solution down the board, corroding any components in it path. I've seen motherboards ruined from this. If you're going to give it away or sell it, you might want to pull the motherboard (remove the two machine screws on the rear I/O panel, next to the pull tabs). Slide out the board and unplug the battery's small connector (has red & black wires), then lift up on the battery, while holding down the "toothed" velcro mount with something non-conductive, like a popsicle stick. Once it's free, dispose of the battery. If you're interested, a replacement can be purchased for about $5-$7 from battery specialty retailers - it's a Rayovac 870 or 871. Even if you don't replace it, removing one that will eventually leak is a good idea, (hopefully) before any damage is done.

How does the pin of SCXI-1302 relate to E serious MIO board

I use PCI-MIO-16E-4 to control my scxi(scxi 1000+1100+1300+1302). Now I want to use the counter and +5V power of MIO board. How does the pins of SCXI 1302 (50 pins) relate to the pins of my MIO board(68 pins)?

Dear Jack,
Please find attached a .zip file which I took from a Knowledge base article entitled "Cable Mapping for a 68 Pin Connector to a 50 Pin Connector" in here you will find a the pin-outs for a 68 pin connector and a 50 pin connector for the E-series boards. When you use the SCXI-1302 you are essentially converting the 68pins of the PCI-MIO-16E-4 to 50 pins, so follow the 50 pin connector diagram and you will see which connections you need to make.
Regards, Sally Tipper -NI.
Attachments:
68to50.zip ‏45 KB

How do you get your money back from a charge you never even made on the app store?

How do you get your money back from a charge you never even made on the app store?

Contact iTunes.
How to report an issue with Your iTunes Store purchase

Hello. My 1st Generation Apple TV with HDMI cable does not turn on. Its a used model purchased on eBay. I've checked and ensured that the electrical plug works. Is there anyway to manually check to see if the unit turns on or do I have a defective uni

Hope I'm using this forum right. I purchased a 1st Generation Apple TV on eBay. Unfortunately, I cannot get it to turn on. I have another Apple TV (1st Generation) that works flawlessly on another TV. So I tried to use the new unit on this TV with same electrical cord and HDMI cable. No luck. It would not turn on. So I do not know if I have a defective unit or if there's another method of turning on the Apple TV. Again:
1. I double checked and it was on the correct HDMI setting (the other Apple TV worked on it) and used the same cable
2. I double checked that the electrical was correct - again, the other Apple TV worked correct.
Any suggestions on fixing this would be most appreciated.
Thank you

Welcome to the Apple Community.
A good indication would be the status light to begin with, it should flash rapidly on start up and then settle down (assuming the status light is working-they have a habit of fading)
The other thing you could try is cycling the resolutions in case the previous user has left it on a setting that your TV doesn't support.
Press and hold both the 'menu' and '+' on the Apple Remote for about 6 seconds.
Press '+'or '-' on the Apple Remote to cycle through the display resolutions.
Pause a couple of seconds after each press for the Apple TV to accept your selection.
When Apple TV reaches an acceptable display resolution and “If you can see the Apple logo, select OK” appears on your TV screen, press 'select' .
If that doesn't help, I fear the Apple TV is defective.

How do the Procurement of materials from projects?

Hi Friends'
How do the Procurement of materials from project s, here our Process is:
Whenever our engineers on site see any shortages he will send a report thro our customized InfoPath request form. Then we decide depending on the material whether to order to USA or Procure locally. Some mechanical parts we procure locally. For this in PR we give reference of WBS element. Purchase department raise PO, we receive material, sent to site And finally we charge USA(parent Company) for this amount against this project.
For the items like electronic cards, Critical mechanical parts to be ordered to USA we send the InfoPath form to USA. We get weekly shipments from USA. We create PR and also PO. No action by our purchase dept. The FREE OF CHARGE (FOC) material is received to us. Stores will do MIGO and then we dispatch to Site.
Friends please suggest how to do this Process through project systems. I need the entire configuration setting that we need to do and the process also, plz friends... I need these settings step by step.
Regards,
Hari
Edited by: Hari Krishna on Jan 3, 2009 12:39 PM

suggest attend course PLM220
If using only WBS then you have to raise PR from MM module and the material demand will not be driven from PS (except Easy Cost Planning)
If using networks then assign material component to network activity and set the item category as non stock item - this will trigger PR from activity

How is the electrical polarity of male jack cigarette charger?

Similar Messages

Maybe you are looking for