How is the field ValStockValue updated in the table S032

Hi,
For a material ValStockValue (S032-WBWBEST) has a negative quantity.
The concerned material has standard price control and there is unrestricted stock.
Could you please let me know how is this field calculated.
Regards
Deepak

have a look into OSS Note 195158 - Copy S032 is updated incorrectly

Similar Messages

  • How do I use AO update in the Route signal.vi

    Hi support,
    My goal is to create a waveform (to buffer it) and output it using the analog card (PCI-6713) N times and with the frequency F. Apperanlty this is done using a (actually 2) digital counter(s) on the PCI-6602 card.
    This is done using route signal.vi using "AO update". However I have not managed to get it working. I only get error -10341. So my questions are how do I do it? More specificly how do I use AO update in the Route singal.vi Do I need to conect the cards in any perticular way (cabels or so)? Also do you have more information about how the vi route signal works (the help file does not help me much)?
    Grateful for all help.
    I'm using labview 6.0 as developpement platform, and using the PCI-6601, PCI-67
    13 and a PCI-7344 cards. Since the program is quite large I will only send a portion of it, the pulseGen is supposed to generate the waveform (loaded as a text file, also submitted) the digital output used is in case 1 (in pulseGen) the analog output is in case 3. The MissingWaveform.vi is just to ensure that a waveform is supplied to the pulseGen.vi
    Sorry about the mess.
    /Chatri

    Cabling and Interfacing between Boards: You have capability for direct simultaneous connection between 6713 and 6602 (also 6601) via the RTSI bus, but you need to get a cable to connect between the boards. You can connect between the boards using the I/O pins of their respective signal conditioning hardware. These connections are slower. There are also PFI (Programmable Function Interfaces) connections that are set within the VI's.
    All that said, it is not obvious why you want to use the RTSI. You can use the PCI-6713 to generate AO. Presumably you have some signal conditioning accessory; which ever pin of that accessory the AO appears on, you wire it over to the SC accessory for the 6601 and the appropriate pin for the counter gate or
    source you want to use.
    Suggestions: Don't try to work in the context of your big VI for now. Get the AO bit and the counting bit to work together by themselves. Then shoe-horn them into the big VI. Also, consider a call to the NI help line. They are very good. 800.433.3488 (800IEEE488)
    In case you hadn't noticed the DAQ cards and Counter/Timer cards come in different flavors and there are specific example VI's to suit. 6602 uses NI-TIO chip, but PCI-671X are DAQ-STC. Again the NI help people are good at catching this kind of stuff.
    Your question is rather large and hard to manage. Perhaps if you break it down into small chunks the advise will be more free flowing.
    mike

  • How can I use Office Update without the Office CD?

    How can I use Office Update without the Office CD? On the microsoft website I've clicked the options which mean I shouldn't need the CD (which wasn't supplied with the laptop), but poartway through updating the service pack I get a request for the Office 2000 Professional CD.
    Any suggestions?

    Hi
    Did you mean a Office or One Note?
    As far as I know the One Note is a part of the Recovering Image and the CD is not delivered with the unit. Furthermore the Toshiba units are not delivered with the Office 2000 software.
    Nevertheless, did you check the update function in the Help i.e. in Word?
    There you will find a options called Check for Updates
    http://office.microsoft.com/en-us/officeupdate/default.aspx
    Bye

  • How do I remove unwanted updates from the App Store?

    How do I remove unwanted updates from the App Store? So you understand better what I'm referring to:
    I have the App Store icon in the Dock. When there's an update a red number appears on said icon. Well, I went to check on the updates and it's for 4 different applications I either no longer have or use. One of them is an update for Lion OS users. I'm still on Snow Leopard, so it doesn't even apply to me.
    So there they sit... I'm not going to download the updates... so how do I get rid of them?

    Hi Andy ..
    no longer have or use
    If there are updates available for apps you have deleted, try this.
    Go to ~/Library/Caches/com.apple.appstore
    Move the Cache.db and Updates files from the com.apple.appstore folder to the Trash.
    Empty the Trash, restart your Mac.
    For any apps you still have installed but do not use, the updates will still be available from the Updates top of the App Store window and show on the red badge on the App Store icon in the Dock.
    edited by:  cs

  • How can I get into updates in the app store on my ipod touch.  I am told that it cannot connect to the itunes store, How can I get into updates in the app store on my ipod touch.  I am told that it cannot connect to the itunes store

    How can I get into updates in the app store on my ipod touch.  I am told that it cannot connect to the itunes store, How can I get into updates in the app store on my ipod touch.  I am told that it cannot connect to the itunes store

    See thes previous discussions:
    App Store Updates (but only Updates)...: Apple Support Communities
    Apps suddenly don't update: Apple Support Communities

  • Does anybody no how to switch off automatic updates on the iphone 5.

    Does anybody no how to switch off automatic updates on the iphone 5 many thanks was1521 UK.

    The reason i asked about automatic updates was because my provider 02 told me about it they said turn it off or get something called a Bolt-on which would provide me with so much internet data at a set price so thanks for your reply Kilted Tim.

  • How to get the field name of an internal table during runtime?

    How to get the field name of an internal table during runtime?

    Hi  Sudhir,
    Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
    Example Code:
        <b>  DATA: v_field(60).                        " Insert this code.
         GET CURSOR FIELD v_field.        " Insert this code.</b>
         <b>CHECK v_field = 'ITAB-KUNNR'.    " Insert this code. (or)
    Write: v_field.</b>
    Regards,
    Ramganesan K.

  • How to include field Internal order in the material master for SD orders

    Hello,
    I would like to know how I can bring the field "Internal Order" to the material master, so I can create materials with assignments to internal orders.
    We want to create Sales Orders where when we enter on order item with a material, the internal order is derived automatically from the material master.
    Thank you in advance!
    Jose Eximeno

    Hello,
    I am not familiar with the field "product attributes" in relation with entering the field "internal order"...
    Could you be a little more specific on how product attributes can be used to enter the internal order number in the material master?
    Best regards,
    Jose

  • How to include the field BSEG-FDLEV in the invoice FV60 and F-43

    hi
    i am try to activate the cash management in my SAP, but i am not able to open the field BSEG-FDLEV (PLANNING LEVEL) in the additional data of the invoice voucher F-43 and FV60
    Is there anyone that knows how to do it? i have played with the field status group of the reconciliation account and the posting key, but nothing happened.
    I have understood that it should be some customizing company level.
    Any help is more than welcome.
    best regards
    Angelo

    Hi,
    Check the below link which is useful
    Re: change planning level in FI document
    Thanks
    Aravind

  • How to declare the field if i want the output as 300.12,00

    How to declare the fields if i want the output as 300.12,00
    i have a quantity field so i need to place . in place of , and , inplace of .
    please help me

    hi,
    declare its as
    CURR
    field.
    Regards
    Anver

  • How to set the field non-editable in the classical report..

    Hi..
              How to set the field non-editable in the classical report..

    Hi experts,
    For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
    on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
    for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
    IF current->is_property_readonly(
    'NICKNAME' ) = abap_false. "#EC NOTEXT
    rv_disabled = 'FALSE'.
    ENDIF.
    when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
    can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
    The field properties are set as Input field and the display checkbox is not checked.

  • How to set field "third party" in the Web Adi, General Ledger - Journals?

    Hello,
    We are trying to find how to set the field "Third Party" in the template WebAdi, and validate data and also can display in the form of general ledger journals.
    thanks for the collaboration.

    hi,
    just make the input feild as mandatory in properties and use the following code.
    data:
    lo_view_controller type ref to if_wd_view_controller,
    lo_dyn type ref to cl_wd_dynamic_tool.
    Create Object
    create object lo_dyn.
    data lt_messages type lo_dyn->t_check_result_message_tab.
    Get view controller reference
    lo_view_controller = wd_this->wd_get_api( ).
    Call Method to verify the element has the value or not
    call method cl_wd_dynamic_tool=>check_mandatory_attr_on_view
    exporting
    view_controller = lo_view_controller
    display_messages = ABAP_TRUE
    importing
    messages = lt_messages .
    endmethod.
    Regards,
    Kranthi

  • I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to set field to blank if the data is # or unassigned

    hi experts,
    how to set field to blank if the data is # or unassigned?
    thx

    Hi
    add the following macro to your workbook (template workbook):
    Sub SAPBexonrefresh(qstring As String, resultArea As Range)
        For Each c In resultArea
            If LCase(c.Value) = "not assigned" Then c.Value = ""
           Next
    End Sub

  • HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

    How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

    Make sure iTunes on the computer is logged into the account on the phone.
    Plug the iPhone in.
    In the popup window warning about wiping your phone, hit cancel.
    In the left pane of iTunes, the phone icon should be there.
    Right click on it, select transfer purchases.
    Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

Maybe you are looking for