How is the forecast profile tied to the article master?

Hello-
I understand how to create a forecast profile, but I assume there is some way to assign that profile to articles or material groups, and I cannot figure that out. If it is assigned, it will show on the article master in the right field, but it cannot be changed or maintained in the article master directly. So, there must be another method to link/assign these outside of the article master.
Any help is appreciated.
Thanks-
Brady

Hello-
Thank you for the answer, I found it - I have a Retail system, so it is structured a bit differently, but the tab is ultimately there.
Thanks again-
Brady
Edited by: Brady Stone on Feb 27, 2009 9:49 PM

Similar Messages

Steps to transport the forecast profiles from development server to the pro

Hello All,
We have a scenario wherein we need to transport forecast profiles from APO development server to the APO production sever.
Can anyone suggest me proper steps to include the forecast profiles into the transport request.
Thanks in advance.
Regards,
Jacky.

Hi Sujay ,
Thanks again.
I did check the transaction mentioned by you. But it din't help in my scenario.
I got the sloution for my problem,
we have two tables for forecast profiles, i,e /SAPAPO/DP440G and /SAPAPO/DP440P (these gets updates as and when we create a forecast profiles ) ,
we have to add the entries from this table for the particular forecast profile into the transport request and then we have to transport those requesets , then the profiles would be transported accordingly.
Anyways thanks for replying.. i am giving you points for helping me..:-)
Regards,
Jacky Jain.

The user profile service failed the logon. User profile cannot be loaded, WIN7 dual boot

Hi all,
I just got a new x201, which I installed ubuntu on a second partition. For a while the two systems were getting along fine, and I was able to switch between them without problems. on my last login it won't accept my credentials (pw or biometric) and says "The user profile service failed the logon. User profile cannot be loaded" and then returns to the login screen. Any ideas on how to fix this without nuking the system?

Hi, I'm having the exact same problem as little_teapot , I cannot get past the login screen. I went onto the Toshiba support site which asked me to do a system recovery using the F8 key on start up. So I tried this but the problem I'm having is when I turn on the computer holding in the F8 key, nothing happens, it just goes through start up as normal and then it just ends up at the login screen telling me that the user profile cannot be loaded. I've tried it a couple of times and I don't know if I'm doing something wrong with the safe mode start up? Also the notebook is a P500/020 and is only 2 months old running Windows 7? if anyone can help I would greatly appreciate it.
Thanks

Why can't I find the color profile info in the library ?

Why can’t I find the color profile info in the library ?
It’s sometimes necessary to convert to sRGB for some applications ( internet, some beamers in clubs,…).
I convert them but afterwards it is nice to have the possibility to check this out and should be possible in lightroom, the info is present why not showing it ( it is not so easy to go in finder and look at it in info for every image)?
Since I’m always working in Adobe profile for printing and so this is important to know !
But no trace of it anywhere….
Thx for any reply.

The disconnect here is many (including me) don't reimport rendered JPEGs
into our Lightroom Catalogs. Why you are doing that is beyond me. You
have the original and can recreate any rendered file at any time.
Storing the derivative JPEGs is redundant, creates additional confusion
and serves little real purpose. Exported versions are considered
discarable by many.
Yes, understand what you're meaning. but the fact is that I started rather recently with lightroom. So my images where classified in directory's and subdirectory's...already.
I think that this is the major problem. This is always a problem when you step in a new system.
Let's say I am going to submit to a photographic society, I have an Export
preset created that exports to proper size and color space for
projection. It creates a file. I send it to the club. Then I delete it.
Why save it? I can recreate it. Then I don't have to manage it, search
for it, or worse yet, risk confusion with my original file or othe
resultant derivatives.
The fact that I like to keep them is
indeed an inborn result of the "pré-lightroom period". A bad habitude
indeed. I'm thinking now of deleting them, will maybe better. On the other side
I still have them just for me in order to know which ones I used and when.
Another bad habitude.
But
since I'm not a professional photographer I'm mostly confronted with the time
issue and it is for me easier to take existing files ready for use...
( doesn't mean you’re not confronted
with this problem
Today place for jpeg's is rather easy since the Gb's are almost free...
Same is true of a client photo. They want an 8x10. I go to the retouched
original, create a JPEG from an 8x10 preset in the proper dimensions and color space. Send it to the lab. Then, I can delete it.
One of the strengths of Lightroom is that it creates many fewer
intermediate file versions along the way toward final creation. Another
strength is that you can save (via snapshots in Develop) your
derivatives, export, and discard them without having to create, import
and manage additional files on disk. In the old days of just Photoshop
you might end up with a dozen or more files on your disk for every
worked file. With Lightroom, you only need one or two.
Will look deeper in your proposed workflow...and yes I'm comming from the old days.
That said, if you want to keep the derivatives for purposes down the road,
that is up to you but I don't understand why they need to be inserted
into your catalog.
Since my catalog is made in the time
from before lightroom I’m still having all these directory's and
subdirectory's...
Easier
for me since even with back-ups of the catalogue still afraid for crashes. And
I keep liking these directory structure because for the moment it's lighrtroom
and tomorrow it can be another program, you never know. It's like a website, "on line versoin only", big problem when a firm at some moment stop to provide this possibility.
I think I will try to go deeper in "how to use lightroom better..."
thanks
Edward De Bruyn

Change the status profile assigned to the line item from PROFA TO PROFB

Hi Experts,
The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
Item Category A -> Status Profile PROFA
Item Category B -> Status Profile PROFB
For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B. However the status profile still remains PROFA.
We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
any quick inputs from any one please......
Thanks in advance
hemanth

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

The User Profile Service failed the logon

Hi
Over the last few weeks I have had literally 100's of my customers reporting this problem
The usual "The User Profile Service failed the logon" message comes up when they try to login
I have been fixing each time by changing the profilelist registry entries as per
http://support.microsoft.com/kb/947215
But it keeps happening, some customers are then okay for a week or two and it then happens again
Has anyone else been seeing a lot of this issue? and if so any ideas what is causing it
All the computers have been checked for viruses and have valid security software loaded, so don't think virus related, but is getting annoying now and rightly so some of my customers are getting fed up having to pay to get it fixed each time
Any ideas?
Darren Rose

Hi,
It seems this is related to your environment, let’s test if we can eliminate this issue by uninstalling the most common software on few test machines.
If you have any feedback on our support, please click
here
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Satellite L450 - The user profile service failed the log on

Hi
I have a Toshiba Satellite L450 and I have had it for a while now and this has never happened before, when I turn it on it goes through the usual and then comes up with my name and a box for me to type my password, as normal. But when I put my password in it says:
The user profile service failed the log on
User profile cannot be loaded
The only option I have is to log off and when I do it takes me back to the password bit. If I put the password in wrong it tells me its wrong.....
Cant do anything with it, I have tried shutting down, etc....looked through the manual and cant see anything about it in there either.......... :(

Hi mate
Please attach to this Microsoft document:
+Error message when you log on to a Windows Vista-based or Windows 7-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded+
http://support.microsoft.com/kb/947215
It seems to be known issue to Microsoft. You have to use the FIX posted there.
Good luck

Can't Log Any Users Onto My Domain Except the Administrator Getting The Following Error "The user profile service failed the logon"

Hi All,
I am currently completing a project for college which involves the creation of a domain, OU's, GPO's etc within a virtual environment.
I am using Windows Server 2008 Enterprise running this on VMware however after having completed and tested all my GPO's now none of my users are able to log on to the domain and keep getting the following error message "The user profile service failed
the logon" "User profile cannot be loaded".
I have tried to a lot of different options prior to posting which include:
Creating a new user account/s in case the previous user policies were corrupt the same error message is shown.
I also configured my DC to allow users to log onto the DC in case this was a network issue but the same error still exists.
My Administrator account always logs onto the DC without fail and applies all the GPO's as it should.
I have rebuilt my servers twice now at this stage and the same problems keep happening at first it was just confined to users within a single OU but now is Domain wide any suggestions on what I can do.
Thanks,
John

John,
Since this is a project, you may have experimented with various settings in multiple Group Policies, so I would recommend you run the Group Policy Modelling Wizard, as it will show you all the GP settings down to a specific user on a specific computer, plus
tell you which Group Policy sets and which settings, and thereby perhaps find where the problem occurs.
Please mark as answer or vote
as helpful when
it applies. Thanks!

"Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.]" for brand new, vanilla Mac App

In OS X Maverick's XCode, I created a brand new Mac > "Cocoa Application", with Core Data and Spotlight Importerl; about as vanilla a Cocoa application I could muster.
Under Preferences > Accounts, I signed in to my Mac Developer Account.
In Targets > Identity, I set Signing to "Mac App Store", and was able to select my Mac Developer Account for "Team".
I then went to Product > Clean, and then Product > Build for... > Running, and then Produt > Archive.
In the Organizer, I select the resulting .app and click "Validate", and hit the Mac App Store radio, and hit "Next", and it's able to log into my Mac Developer Account.
I select my Provisioning Profile in the dropdown, and click "Validate".
It comes back with several errors:
1 - "Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.] For more information, visit the Mac OS Developer Portal."
2 - "The bundle identifier cannot be changed from the current value, '{DIFFERENT-BUNDLE-FROM-OTHER-PROJECT}'. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect.
3 - Invalid Code Signing Entitlements. The entitlements in your app bundle signature do not match the ones that are contained in the provision profile. The bundle contains a key that is not included in the provisioning profile: 'com.apple.applications-identifier' in '{BUNDLENAME}.app/Contents/MacOS/{BUNDLENAME}'
I was able to do the same process before, for a vanilla app, before Mavericks. I'm not sure if this is a Mavericks error, or a fact that now I have multiple app projects. Particularly odd is that DIFFERENT-BUNDLE-FROM-OTHER-PROJECT in error (2) is not the same bundle name as the current project's bundle.
Would love any help you can provide! Thank you!

Seen this thread?
New codesign behavior, --deep option
"Code signing has some interesting changes in Mavericks (that apparently haven't made it into the release notes yet...). Note that this is a change to the operating system, not to the devtools."

How to apply ICC profiles on all the photos in preset before printing.   and user preset

Hi,
hope someone can point me to the right direction.. I have 2 questions about ICC profiles and settings in lightroom.
1.) I found that many photos that I have is a little two blue. There are thousands of photos. I would like to know if there is a way in Lightroom to "Autobatch" the changes to all those photos.
The changes are under "white balance" -> "temp" -> (need to increase by 2)
2.) I will send out the photos to print . According to the photo stores tech, I can apply their ICC (printer/paper) profiles before sending the files to them. So, it will have better match how the photos come out.
Last time I printed some photos with them, many of the come out too dark.   But it looks fine on screen, and a little too red if I use my own inkject printer. I hope I correct this.
If it cannot be done in lightroom, it can only be done with Photoshop, please let me know. I will try to use other computer with PS installed.   just let me know the steps.
Thanks in advance.

I would sugget two UI changes:
1. The enable / disable is confusing - the toggle switch to turn it on, changes the button label to "Auto Sync" to indicate that it is on. But, this is highly un-conventional and confusing - usually a button label indicates what will happen when you click, not that it is on, and clicking it will actually turns it off - bass-freakin'-ackwards if you ask me!... (Add to it the toggle switch tooltip is the same in both cases - indicating that the switch will enable it, when actually, in one case it will enable, but in the other case it will disable...)
2. Some simple UI difference that you can't ignore but doesn't bug the ship out of you either, when auto-sync is on: maybe a red-tint to the slider draggers or something...
Summary: Once you use something other than the button label to indicate Auto-Sync is on, then you can change the button label to read "Auto Sync Off". And if the On indication has an "ommi-present" quality to it - so much the better.
Rob

Palm Treo 700p How do I delete the User Profile and retain the data?

I want to sync my palm to my computer under a new profile. I don't want to loose the data. How do I delete or change the 700p profile so when I sync it thinks it is a different 700p?
Thanks in advance
JT
Post relates to: Treo 700p (Verizon)

In Palm Desktop, click the drop-down list of Hotsync IDs and select Edit Users. Never done it myself, but if all you want to do is change your Hotsync ID's name, that should do it.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How to create a profile to control the access to Query Designer 2004s

Hi all,
I saw the note Note 962530 - NW04s: How to restrict access to Query
Designer 2004s , where in alternative solution there is the approach on
how to create a database table and modify the function module to control the access.
However, we need to a security profile check that can prevent or allow
who can access 04s tools. Because this is easy to maintain and we don't need to modify the database table time to time.
Please update if it is feasible to have a check within the profile
of the users to acces 04s query desinger. This way we can control
effectively who can access new tools.
Thanks,
Dicky

I can suggest that as this is a Security you might wanna ask the Person who is handling Security in your office.
He can add different Roles which can then control their acess.
For e.g. if you want that your user should be able to run Specific Queries a,b,c,d created by you.
I will suggest interact with SEcurity Personal and ask him to create a Role X.
You can then publish your queries in Role X.
So your users will have acess and security for X and they will then run the queries from them.
Likewise, different other options are also there.
If your queries are on Planning cube then things like giving them acess to Tools should take place similarly in different fashion.
Your user can also use Query desinger and can opne queries from Roles .
Hope this helps.

"The user profile service failed the logon. User profile cannot be loaded."

I recently purchased a refurbished laptop from MTC (windows 7) and have been trying to remote into the windows systems at my school but I keep receiving this error message. I'm aware there are dozens of threads on this topic but mine is slightly different.
Bear with me, I know next to nothing about computers...
I initially tried to follow the instructions given out by Microsoft (can't add a link here), but when it comes to looking at my S-1-5 directories, I do not have any that end in .bak, nor do I have two equally names ones. I have one that is a string
of numbers followed by -1000 and one with the same string of numbers but ending in -500.
The -1000 directory is missing the RunLogonScriptSync file, and has my account listed under value name for the ProfileImagePath information. The -500 directory has the RunLogonScriptSync file and has "Administrator" listed under
the value name for the ProfileImagePath.
In the instructions cited above I tried skipping to step 15 and accessing C:\Users\default\appdata\local\application data but I get an error message saying access is denied. So I'm thinking there are two administrative accounts on this laptop, but
when I access the accounts on the laptop I can only see mine.
Any help would be appreciated!
Thanks.

In the instructions cited above I tried skipping to step 15 and accessing C:\Users\default\appdata\local\application data but I get an error message saying access is denied. So I'm thinking there are two administrative accounts on this laptop, but
when I access the accounts on the laptop I can only see mine.
the "access denied" message, is making you think this?
if so, ignore that, since the "access denied" message is a classic MSFT misdirection.
It is *not* that you don't have access - the path you are trying to navigate to does not actually exist (it is a junction/reparse, not a folder), and, Windows Explorer doesn't follow that nicely, so it throws a misleading error message:
C:\Users\Default\AppData\Local>dir /AL
Volume in drive C is Windows7_OS
Volume Serial Number is C0EB-A540
Directory of C:\Users\Default\AppData\Local
14/07/2009 03:08 PM    <JUNCTION>     Application Data [C:\Users\Default\AppData\Local]
14/07/2009 03:08 PM    <JUNCTION>     History [C:\Users\Default\AppData\Local\Microsoft\Windows\History]
14/07/2009 03:08 PM    <JUNCTION>     Temporary Internet Files [C:\Users\Default\AppData\Local\Microsoft\Windows\Temporary Internet Files]
               0 File(s)              0 bytes
               3 Dir(s) 33,354,055,680 bytes free
Instead, the "user profile service service failed the logon" can be commonly caused by an improperly secured file within any of the other folders (folders which form the Default User profile).
Here's one which caught me out, and MSFT helped me resolve via a support case, and they blogged it afterwards:
http://blogs.msdn.com/b/asiatech/archive/2014/01/30/new-user-gets-event-1509-after-deploying-ie9-10-11-packaged-by-ieak.aspx
(my advice to you, is to dive into the event log with eventvwr, and look for an event similar to 1509, which should point you in the right direction for your particular situation)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Transporting the master forecast profile

Hi,
How could i transfer a master forecast profile other than /sapapo/tsobj..
pls answer, vignesh

Hi
As far as I know I think we can only transport the forecast profiles via T-code TSOBJ ,
Otherwise you can create them manually on production system directly, if you have enough authorization on the system. In our case we treat these are softconfigs as business users also want to check the forecast profile and execute the forecasting.
Thanks
Amol

I need to retrieve my bookmarks from another laptop which doesn't boot to Windows any more. I have managed to copy the Firefox Profiles folder from that laptop - how do I now import bookmarks to a new laptop?

I've tried replacing the contents of the old Profile folder into the new folder and I have also tried just replacing the urlclassifier3.sqlite file, but that doesn't work either.
Googling hasn't helped me over the last 24 hours but surely there must be a way to do this - right?
Many thanks,
Anthony

Yes, there is a way to restore your bookmarks from your old laptop to the new one. Note that just replacing the contents of old Profiles folder will not work because your profiles.ini file contains a different profile name.
For steps on how to restore your bookmarks, please read this article: [http://support.mozilla.com/en-US/kb/Backing%20up%20your%20information Backing up your information].
If you wish to know more about Profiles, please read [http://support.mozilla.com/en-US/kb/Profiles this] article.

How is the forecast profile tied to the article master?

Similar Messages

Maybe you are looking for