How is the gallery autoplay speed controlled?

How is the gallery autoplay speed controlled? I'm using the CADACPortfolio theme.

Hi Kernelo,
I think you are talking about changing the speed of the image slider in carousel in the cadac template. You need to make changes in the Javascript code for controlling the speed. This post has the information on it : http://forums.adobe.com/message/5060822#5060822
Please let me know if you meant something else. Also, please provide us the page URL and screenshoot as well.
Regards,
Aishvarya Raj Rastogi

Similar Messages

How is the ODD fan speed controlled?

I have a 2006 iMAC. The HD and CPU fans perform as expected, but the ODD fan 'goes like the clappers' even when the drive is not in use. I have read elsewhere the ODD uses the same sensors as the HD, is that the case? I have tried the SMC reset a couple of times but I guess this could be a hardware or firmware problem. The fans have 4 wires, I guess there is some sort of feedback system that tells the logic board the fan speed. I am an engineer, but new to MAC hardware. Any ideas chaps?
Many thanks, Andy

There is a thermal sensor on the optical drive that controls the ODD fan and either it is disconnected or there is something wrong with it.
iMac Intel 20" EMC 2105 and 2118 Optical Drive Replacement - Page 12 - iFixit
For more see > iMac Intel 20" EMC 2105 and 2118 Repair Manual - iFixit

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

Flash Web Gallery Slide Speed Control?

Using LR 1.1 I put together (in the web module) and ftp'd to my web server a number of images of a dog show, as a slide show. I used the basic flash gallery template that comes with LR to do this.
It works just fine for me but some of the viewers have asked for the ability to speed up or slow down the slides. Does LR have the ability to allow viewers to do that?
Or on a more basic level, can I adjust the timing of the changes before I upload the gallery?
I believe there is a speed control when creating a .pdf slide show but I can't find one in the web module.
You can see the show (if you really like dog shows, or just want to see what I am talking about) at http://bobbaron.com/OKCClassic2007BW/index.html
Thanks,
--Bob

One more Question: In the downloadable templates there is Web Gallery 3: In the Samplefile the thumbnails are all rotated a litte, how is that done?

How is the ADSL Downstream Speed chosen and what c...

I changed to BT Broadband last October and had problems with the ADSL Downstream connection speed (which affects the BT Profile ) . Contacting offshore was a brick wall and eventually I emailed the Head of BT. I received excellent help from the local Technical Help and the speed appeared to settle down.
However, at least once a week, the speed still drops from around 2656 Kbps to 2144 Kps. From the daily btspeedtester results I have recorded since October, the change is directly related to a reduction in ADSL Downstream Output Power (in this instance, from 4.1 to 3.3 dbm).
The Line Attenuation Down and Up has remained within 0.5db over the period (58.6 and 31.5 db respectively) and the Noise Margin Downstream (for an output power of 4.1 dbm), between 7 and 8.3 db.
This raises questions regarding control of the Output Power Downstream when the connection is being set up :-
a) Does BT,at initial set up, test the line and decide on a value (eg 4.1dbm), depending on the line parameters, which is input to the modem at the exchange? I notice in some forums, figures of 14dbm quoted.
b) What parameter(s) control the power, in this instance, reducing it by 20% on occasions, for no apparent reason and taking three days to revert to the original figure, which is ridiculous.
Nobody in BT Technical Help knows the answer and I wonder if anyone has the relevant information on the above.
As far as I am aware the cable from the exchange is underground and there has been no significant rain in the Glasgow area for two months, so the old excuse about the weather does not hold !

Thanks for info. Am aware of the Noise margin being at least 6db.
When the the power has dropped on several occasions to 3.3dbm, the noise margin has increased to around 10db, therefore does not appear to tie in with maintaining the margin to around 6db.
Due to a reduction in ADSL speed, the net result is the IP Profile is reduced to 1750 and sometimes 1500, with the obvious effect in thruput
Near end crosstalk is usually the major problem in cable systems, however, in this case, the receive leg at the exchange is bandwidth limited (only 448 Kbs) and probably has a low pass filter at the input to the ADSL modem.
Have noticed in other forums outpowers being quoted at around 15dbm, considerably higher than mine !

Re: How is the ADSL Downstream Speed chosen and wh...

I have a similar problem of the link being 'reset' most nights, usually between 2 and 4 AM. The DSLAM is reset and looses the target setting for the Noise Margin. It should be around 6-9 dB, but mine constantly gets reset to 16.5 dB and hence a very slow throughput.
Openreach engineers have twice had it remotely reset to 6 dB but after a few weeks it returns to 16.5 dB which is unacceptable. In my view it should be permanently coded into the DSLAM so it can't be 'fiddled' and therefore give a better experience to users.
The experience shows that any claims of 'maximum line speed capability' are false as they are biased by the noise margin target set in the DSLAM.
I also understand from the Engineers that there are numerous resets performed during the 'quiet' periods at night when most users are asleep. That gives rise to many of the queries people have about why it changes. As far as I can make out there is no logical technical reason for all this change (I am a retired electronics engineer with 50 years practical experience) so it seems to me to be some attempt at limiting the load on the 'backbone' so they don't have to invest in equipment that can handle greater thoughput properly.
They will eventually have to invest as the fibre scheme rolls out further. However, many rural customers, like us, will have a very long wait before seeing any benefits from fibre.

DSLAMS only drop line connections for the purpose of line training, and implementing line running methods during the training period.
It's the EU's router or modem that drops connections under normal conditions, often through excessive error rate breach caused either by line noise or impulse noise on the DSL path.
You're correct in assuming your noise margin should be 6-9db under "normal circumstances" ... this is considered target margin on which BT dslams and msans will attempt to negotiate a DSL connection to an EU modem.
If the noise margin is increasing that is an indication that the line characteristics are under a profound effect by external influences, impulse noise or line crackle, and thus the margin is increased by the line management in order for the dslam to continue to bitload the datastream, at the sacrifice of a chunk of linespeed. All normal, and part of line management's role in both defending the network against corrupted data, and maintaining a connection with the end user, so far as it can.
Dslam line control does benefit both user and network, but the network comes first. The foundation for DLM , dynamic line management is not to permit a good end user experience, it's to defend thousands of network nodes against data corruption, on a network that is the backbone of the country's economy, as well as a vehicle for residential communications.
No resets are performed so far as DLM is concerned during night time hours, merely the network is dynamic and ever changing so far as bandwidth usage is concerned, and runs in a totally automatic and indiscriminating manner.
And as set out in OFCOM's guidelines, all commodities under the constraints of BT wholesale's custom and practice with regard to end user services .... show no discrimination to any one supplier or end service provider.
My own opinions on the politics are here:
http://community.bt.com/t5/BT-Infinity/bt-wholesale-is-a-farcre/m-p/789354#M85436

How does the concurrent 'Set cost controls' in cost management work?

Hi,
Can anyone tell me the use of 'Set cost contols'?
Thanks in advance!
Thanks,
Kaveri

The "Set cost controls" concurrent program is used in R12 to mass update the cost control fields on item costs.
The cost control region is found by going to Cost management >Item costs > Item Costs
The concurrent program lets you specify which items /costs should be updated by using various parameters such as cost type, item range, category range etc.
And you can specify the source for the new cost control data and the new value for the fields.
Hope this answers your question,
Sandeep Gandhi

How populate the data in table control in BDC?

pls urgent?

hi,
see the below code .
FORM create_bdc_session .
DATA : w_saved_tx.
DATA g_r_itab TYPE typ_itab_rec.
CLEAR g_t_itab.
CLEAR g_r_itab.
LOOP AT g_t_itab INTO g_r_itab.
skip error lines
    IF g_r_itab-ebeln = 'ERROR'.
      CONTINUE.
    ENDIF.
open Bdc session
    AT FIRST.
      PERFORM bdc_open_group.
    ENDAT.
    g_t_itab = g_r_itab.
On change in agreement number
    AT NEW ebeln.
      PERFORM bdc_header.
      CLEAR: w_dtl_cnt_i, w_line_i.
    ENDAT.
save at full page
    IF w_line_i > 11.
      PERFORM bdc_save.
      PERFORM bdc_header_change.
      w_line_i = 1.
    ENDIF.
detail material processing
    PERFORM bdc_detail.
    CLEAR w_saved_tx .
save at end of agreement
    AT END OF ebeln.
      IF w_saved_tx NE 'Y' AND w_dtl_cnt_i > 0.
        PERFORM bdc_save.
      ENDIF.
      w_saved_tx = 'Y'.
    ENDAT.
ENDLOOP.
PERFORM bdc_close_group.
ENDFORM.                    " CREATE_BDC_SESSION
*&      Form BDC_OPEN_GROUP
      text
--> p1        text
<-- p2        text
FORM bdc_open_group .
DATA w_user_tx LIKE apqi-userid.
w_user_tx = sy-uname.
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      client              = sy-mandt
      group               = p_bdc
      keep                = 'X'
      user                = w_user_tx
    EXCEPTIONS
      client_invalid      = 01
      destination_invalid = 02
      group_invalid       = 03
      holddate_invalid    = 04
      internal_error      = 05
      queue_error         = 06
      running             = 07
      user_invalid        = 08.
CASE sy-subrc.
    WHEN 0.
    WHEN OTHERS.
      WRITE: / 'BDC OPEN ERROR', sy-subrc.
ENDCASE.
ENDFORM.                    " BDC_OPEN_GROUP
*&      Form BDC_HEADER
      text
--> p1        text
<-- p2        text
FORM bdc_header .
REFRESH bdcdata.
CLEAR   bdcdata.
determine now if text exists
CLEAR w_text_lines_i.
Transaction ME31K.
PERFORM bdc_dynpro      USING 'SAPMM06E' '0200'.
PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field       USING 'EKKO-LIFNR' g_t_itab-lifnr.
PERFORM bdc_field       USING 'RM06E-EVART' 'MK'.
PERFORM bdc_field       USING 'RM06E-EVRTN' g_t_itab-ebeln.
PERFORM bdc_field       USING 'EKKO-EKORG' g_t_itab-ekorg.
PERFORM bdc_field       USING 'EKKO-EKGRP' g_t_itab-ekgrp.
Item category is on a detail line, but is entered on the entry screen
IF g_t_itab-pstyp = '3'.
    g_t_itab-pstyp = 'L'.
ELSE.
    CLEAR g_t_itab-pstyp.
ENDIF.
PERFORM bdc_field       USING 'RM06E-EPSTP' g_t_itab-pstyp.
PERFORM bdc_field       USING 'RM06E-WERKS' p_nwerks.
PERFORM bdc_field       USING 'RM06E-LGORT' g_t_itab-lgort.
PERFORM bdc_dynpro      USING 'SAPMM06E' '0201'.
PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field       USING 'EKKO-WAERS' g_t_itab-waers.
WRITE sy-datum TO w_date_tx DD/MM/YYYY.
PERFORM bdc_field       USING 'EKKO-KDATB' '01.06.2004'.
PERFORM bdc_field       USING 'EKKO-KDATE' '31.12.2999'.
w_tcode = 'ME31K'.
ENDFORM.                    " BDC_HEADER
*&      Form BDC_SAVE
      text
--> p1        text
<-- p2        text
FORM bdc_save .
final save
PERFORM bdc_dynpro      USING 'SAPMM06E' '0220'.
PERFORM bdc_field       USING 'BDC_OKCODE' '=BU'.
needed for some boxes (save anyway message)
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
PERFORM bdc_field       USING 'BDC_OKCODE' '=YES'.
Insert the transaction into the BDC session.
PERFORM bdc_insert USING w_tcode.
REFRESH bdcdata.
CLEAR   bdcdata.
ENDFORM.                    " BDC_SAVE
*&      Form BDC_HEADER_change
      text
--> p1        text
<-- p2        text
FORM bdc_header_change .
DATA: w_pos LIKE rm06e-ebelp.
REFRESH bdcdata.
CLEAR   bdcdata.
determine now if text exists
CLEAR w_text_lines_i.
Transaction ME32K.
PERFORM bdc_dynpro      USING 'SAPMM06E' '0205'.
PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field       USING 'RM06E-EVRTN' g_t_itab-ebeln.
PERFORM bdc_dynpro      USING 'SAPMM06E' '0220'.
PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
w_pos = g_t_itab-ebelp - 10.
PERFORM bdc_field       USING 'RM06E-EBELP' w_pos.
w_tcode = 'ME32K'.
ENDFORM.                    " BDC_HEADER_change
*&      Form BDC_INSERT
      text
     -->P_W_TCODE text
FORM bdc_insert USING    p_w_tcode.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      tcode          = w_tcode
    TABLES
      dynprotab      = bdcdata
    EXCEPTIONS
      internal_error = 01
      not_open       = 02
      queue_error    = 03
      tcode_invalid = 04.
CASE sy-subrc.
    WHEN 0.
    WHEN OTHERS.
      WRITE: / 'BDC INSERT ERROR', sy-subrc.
ENDCASE.
ENDFORM.                    " BDC_INSERT
*&      Form BDC_CLOSE_GROUP
      text
--> p1        text
<-- p2        text
FORM bdc_close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      not_open    = 1
      queue_error = 2
      OTHERS      = 3.
CASE sy-subrc.
    WHEN 0.
    WHEN OTHERS.
      WRITE: / 'BDC CLOSE ERROR', sy-subrc.
ENDCASE.
ENDFORM.                    " BDC_CLOSE_GROUP
*&      Form bdc_dynpro
      text
     -->P_0658   text
     -->P_0659   text
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "BDC_DYNPRO
*&      Form BDC_FIELD
      text
     -->P_0688   text
     -->P_W_POS text
FORM bdc_field USING field value.
CLEAR bdcdata.
bdcdata-fnam = field.
bdcdata-fval = value.
APPEND bdcdata.
ENDFORM.                    "BDC_FIELD
*&      Form load_dataset
      text
--> p1        text
<-- p2        text
FORM load_dataset .
load dataset
LOOP AT g_t_itab INTO g_r_itab.
Load dataset with records needed for direct input
    MOVE-CORRESPONDING g_r_itab TO g_t_itab.
    AT NEW ebeln.
      PERFORM load_dataset_mbepoh USING w_phys_outfil1_tx.
    ENDAT.
    PERFORM load_dataset_mbepoi USING w_phys_outfil1_tx.
ENDLOOP.
ENDFORM.                    " load_dataset
*&      Form load_dataset_mbepoh
      text
     -->P_W_PHYS_OUTFIL1_TX text
FORM load_dataset_mbepoh USING   p_dataset.
CLEAR rec1.
MOVE-CORRESPONDING g_t_itab TO rec1.
rec1-stype = '1'.
rec1-ernam = sy-uname.
TRANSFER rec1 TO p_dataset.
ENDFORM.                    " load_dataset_mbepoh
*&      Form load_dataset_mbepoi
      text
     -->P_W_PHYS_OUTFIL1_TX text
FORM load_dataset_mbepoi USING    p_dataset.
CLEAR rec2.
fields for MBEPOH
ADD 1 TO w_good_i.
MOVE-CORRESPONDING g_t_itab TO rec2.
rec2-stype = '2'.
rec2-werks = p_nwerks.
rec2-ematn = g_t_itab-matnr.
TRANSFER rec2 TO p_dataset.
ENDFORM.                    " load_dataset_mbepoi
*&      Form BDC_DETAIL
      text
--> p1        text
<-- p2        text
FORM bdc_detail .
DATA:   w_ktmng_tx(11),
           w_peinh_tx(5) TYPE c,
           w_price_p(13) TYPE p DECIMALS 6,
           w_price2_p(13) TYPE p DECIMALS 2,
           w_price3_p(13) TYPE p DECIMALS 3,
           w_price0_p(13) TYPE p DECIMALS 0,
           w_cent_p TYPE p DECIMALS 2,
           w_peinh_n(5) TYPE n,
           w_price_tx(14).
accumulate lines to determine if page_down required
ADD 1 TO w_addit_i.
ADD 1 TO w_dtl_cnt_i.
ADD 1 TO w_line_i.
IF w_line_i > 12.
    w_line_i = 2.
    PERFORM bdc_dynpro      USING 'SAPMM06E' '0220'.
    PERFORM bdc_field       USING 'BDC_OKCODE' '=NP'.
ENDIF.
get material unit of measure
CLEAR mara-meins.
SELECT SINGLE * FROM mara WHERE matnr = g_t_itab-matnr.
w_price_tx = g_t_itab-netpr.
w_peinh_tx = g_t_itab-peinh.
IF g_t_itab-ktmng = 0.
    g_t_itab-ktmng = 1.
ENDIF.
w_ktmng_tx = g_t_itab-ktmng.
get decimal places of currency
TCURX-CURRDEC = 2.
SELECT SINGLE * FROM TCURX WHERE CURRKEY = g_t_itab-waers.
multiply Price
W_PRICE_P = g_t_itab-netpr.
CASE TCURX-CURRDEC.
    WHEN 0.
      W_PRICE_P = g_t_itab-netpr * 100.
      W_PRICE0_P = W_PRICE_P.
      W_PRICE_TX = W_PRICE0_P.
    WHEN 2.
      W_PRICE2_P = W_PRICE_P.
      W_PRICE_TX = W_PRICE2_P.
    WHEN 3.
      W_PRICE3_P = W_PRICE_P.
      W_PRICE_TX = W_PRICE3_P.
ENDCASE.
material overview screen (with enter)
PERFORM bdc_dynpro     USING 'SAPMM06E' '0220'.
PERFORM bdc_field      USING 'BDC_OKCODE' '=DETA'.
PERFORM bdc_field_idx USING 'RM06E-TCSELFLAG' 'X' w_line_i.
PERFORM bdc_field_idx USING 'EKPO-EMATN' g_t_itab-matnr w_line_i.
PERFORM bdc_field_idx USING 'EKPO-KTMNG' w_ktmng_tx w_line_i.
PERFORM bdc_field_idx USING 'EKPO-NETPR' w_price_tx w_line_i.
PERFORM bdc_field_idx USING 'EKPO-PEINH' w_peinh_tx w_line_i.
PERFORM bdc_field_idx USING 'EKPO-BPRME' mara-meins w_line_i.
PERFORM bdc_field_idx USING 'EKPO-WERKS' p_nwerks w_line_i.
PERFORM bdc_field_idx USING 'EKPO-LGORT' g_t_itab-lgort w_line_i.
IF g_t_itab-pstyp = '3'.
   g_t_itab-pstyp = 'L'.
ELSE.
   CLEAR g_t_itab-pstyp.
ENDIF.
PERFORM bdc_field_idx USING 'RM06E-EPSTP' g_t_itab-pstyp w_line_i.
item details screen
PERFORM bdc_dynpro      USING 'SAPMM06E' '0211'.
PERFORM bdc_field       USING 'BDC_OKCODE' '=OR'.
PERFORM bdc_field       USING 'EKPO-SPINF' 'B'.
PERFORM bdc_field       USING 'EKPO-BSTAE' '0001'.
PERFORM bdc_field       USING 'EKPO-MWSKZ' g_t_itab-mwskz.
PERFORM bdc_field       USING 'EKPO-IDNLF' g_t_itab-idnlf.
PERFORM bdc_field       USING 'EKPO-REPOS' 'X'.
PERFORM bdc_field       USING 'EKPO-EVERS' g_t_itab-evers.
PERFORM bdc_field       USING 'EKPO-KZABS' 'X'.
PERFORM bdc_field       USING 'EKPO-NETPR' w_price_tx. "deliberate
PERFORM bdc_field       USING 'EKPO-PEINH' w_peinh_tx . "Overwriting
Source list
PERFORM bdc_dynpro      USING 'SAPLMEOR' '0220'.
PERFORM bdc_field       USING 'BDC_OKCODE' 'EN'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'EORD-AUTET(01)'.
PERFORM bdc_field       USING 'EORD-VDATU(01)' '01062004'.
PERFORM bdc_field       USING 'EORD-BDATU(01)' '31122999'.
PERFORM bdc_field       USING 'EORD-FEBEL(01)' ' '.
PERFORM bdc_field       USING 'EORD-AUTET(01)' '1'.
GOTO Conditions
PERFORM bdc_dynpro      USING 'SAPMM06E' '0211'.
PERFORM bdc_field       USING 'BDC_OKCODE' '=KO'.
PERFORM bdc_dynpro      USING 'SAPMV13A' '0201'.
PERFORM bdc_field       USING 'BDC_OKCODE' '=BACK'.
ENDFORM.                    " BDC_DETAIL
*&      Form BDC_FIELD_IDX
      text
     -->P_1390   text
     -->P_G_T_ITAB_PSTYP text
     -->P_W_LINE_I text
FORM bdc_field_idx USING    field LIKE bdcdata-fnam
                            value p_index TYPE i.
DATA: w_index_tx(2).
UNPACK p_index TO w_index_tx.
CLEAR bdcdata.
CONCATENATE field '(' w_index_tx ')' INTO field.
bdcdata-fnam = field.
bdcdata-fval = value.
APPEND bdcdata.
ENDFORM.                    " BDC_FIELD_IDX
regards,

[Solved] Asus L1366 mobo, cpu fan speed control

Hi, everyone,
I finally have this new core i7 system, to replace my old AMD athlonx2. I have one question about the CPU fan speed control.
I remember that in my old system, the cpu fan speed control works out of box, no configuration is needed.
But when I install arch 64 on this new i7 system, the cpu fan is running at its maximum speed constantly while the CPU temperature is modestly low. I know there is a wiki teaching how to do it.
However, I am just curious why it doens't work out of box any more? Does CPU fan control work for you guys out of box normally? especially the new Core i7 cpu users?
Please let me know, really appreciated it.
Thanks a lot.
Update: the issue is solved, see my last post, the solution is blacklisting: asus_atk0110, instead use w83667hg.
Cheers.
Last edited by mark.altern (2009-10-01 08:18:18)

First off, it would be useful to know what the sensors-detect script actually reports.
Okay. How fan control works on Linux: First, navigate to /sys/class/hwmon
Each of these folders, i.e. hwmon0, stands for a sensors monitor / fan controller on your mainboard that may control one or several fans. Inside hwmonN, there should be a subfolder called device, which contains several interfaces if your BIOS allows software-side fan control. You can read them with cat and write to them with echo.
Examples:
pwm1_enable shows if OS-level fan control is enabled (1) or disabled and in BIOS control (0). Changing fan speed won't work if this is disabled. (i.e. cat /sys/class/hwmon0/device/pwm1_enable reports 0 -> disabled; you could enable it with echo 1 > /sys/class/hwmon0/device/pwm1_enable).
pwm1 allows to change fan speed. The values range from 0 (fan off) to 255 (full speed, 12V).
fan1_input shows the current RPM if a fan is connected. You can only read from this interface. Its useful to check all of these in the each of the hwmon folders to find out if there is actually a fan connected to the fan controller (they often have more ports than mainboard manufacturers use).
There might be a fan1_div, this is somehow related to how the kernel reads the RPM, I don't know how it works.
temp1_input interfaces can appeare too, if some of the chips have temperature sensors located somewhere. I *think* lm_sensors places the core temperatures it reads from CPU (the coretemp-isa-000X thingies) in one of the hwmon-folders too.
There might be interfaces for different fans in the same hwmon folder, i.e. pwm2_enable, pwm2, fan2_input, etc., all interfaces with the same index belong to the same physical fan connector, and all in the same hwmonN are managed by the same IC on your mainboard.
Warning: These interfaces, if they work, control the fans directly without any kind of security measure. If you shut some essential fan down, it will stay off until you reboot your CPU shuts down.
(If you see something likein0_alarm, in0_input, in0_max, etc. it's a voltage monitoring chip.)
If one of those interfaces can do something, OS-level fan control does work, if none of those folders contain a working pwm interface, fan control seems to be unavailable.
Sometimes there is an option in the BIOS to enable it, and for some BIOSs software-side fan control only works if dynamic fan control is disabled in the BIOS and fan speed is set to a static value - or vice versa.
I don't know what you are using to control fan speed, there are many applications that use these interfaces, i.e. GNOME or KDE power managers, so I'm not sure what is happening:
IF: Windows 7 enables OS-level fan control and sets it the RPM to those you observed and you have nothing that provides fan control in Arch and so fan control stays at BIOS-level, which might also read out a different sensor / the same sensor differently or it might be more conservative in setting fan speeds altogether;
OR: You have something that provides fan control installed in Arch and it reads out a the wrong value supplied by lm_sensors and thus sets a higher fan speed.
Anyway, possible solutions I can think of:
Find out if you have some kind of fan control software and what it does. For example, I use the fancontrol daemon, I can't help you if you use something else.
The wiki mentions how to assign a fan speed to a certain temperature sensors. You might assign it to a different one. For example, there are no sensor chips on the mainboard of my EEE (no temp1 etc.) so I assigned the fan speed to the temperature reported by the BIOS via ACPI (those are in /sys/class/thermal, also no "device" subfolder on EEEs):
FCTEMPS=/sys/class/hwmon/hwmon0/pwm1=/sys/class/thermal/thermal_zone0/temp
You could also change the MINTEMP/MAXTEMP values to one higher than those you actually want to compensate for the effect of lm_sensors reporting temperatures that are too high.
It is currently not possible for a mortal user to change the coretemps lm_sensors reads, see this post, last paragraph.
There is a configuration file, /etc/sensors3.conf, you can change sensor names and adjust offsets here, but only for the monitoring chips and their sensors that are on the mainboard.
Last edited by Malstrond (2009-08-19 19:34:22)

Changing the EVB3 speed control

How do I change the rotary speed control number on the EVB3 to accept controller change #82, which is what my Nord Electro is sending? I'm using the Electro as a MIDI controller for Mainstage, and I've got all three pedal jacks plugged in, but i don't want the sustain pedal to change speeds. What am I missing?
Thanks,
Stewart

Duh...it's in the manual. Just change the Midi Mode in the EVB3 controls to NE (I think that might be short for Nord Electro)

Where are the speed control buttons

HELP! I am listening to book and I don't know how to access the audio speed control buttons (ie., 1x, 2x etc.) on my iPod Nano 6th generation. Thanks for any help on this .

They ARE still there - at least in my Safari (5.1.2)!
Maybe some help here:
https://discussions.apple.com/thread/3193374
charlie

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How do I use the Oracle Developer Reporting Control in Visual Basic 6.0?

I was wondering how to use the Oracle Developer Reporting Control componant in Visual Basic 6.0 to generate reports in Oracle Reports? Any help would be appreciated.

Hi Rohit,
Would like to ask you some questions about the oracle report with Visual Basic.
1. I have a report built in oracle report. Currently there is a Visual Basic program want to pass some parameter to this report. Can Visual Basic program pass the parameter to this oracel report?
2. Based on yr answer, do i have to installed the oracle report? or just copy and register the Rwsxa60.ocx (i'm using oracle report 6i) in the PC? So can i use this activeX control.
3. Is this activeX control similar to Crystal report object which can found in VB?
4. Is there an example/guide on how the Visual Basic pass the parameter to oracel form?
Your answer will be much appreciated.
Thanks.
Regards,
Hock Leong

How can i use the ACL file to control the access from the other website?

Hello all~
My Sun one is 6.1 sp3 on Windows 2003 SE, and I am try to use the ACL file to control the access.
My ACL file is below:
version 3.0;
acl "path=my_path_on_HD";
deny absolute (all)
(user = "anyone") and
(dns = "*.my_site.com");
deny absolute (all)
(user = "anyone") and
(dns = "*.other_site.net");
Once I add the "deny", anyone include my site is decline for vist the path specify in the ACL file. But if remove the "deny", everyone include other one's website can access the file.
Can anybody tell me how to make it work?

I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object>

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

How is the gallery autoplay speed controlled?

Similar Messages

Maybe you are looking for