How is the integral calculated within Biobench

I am attempting to finish my thesis, and I can not find any literature on how the software calculates the intergral. Is the software utilizing continous analogue integration, constant reset time integration, or constant reset level integration? What value is it using for this?

Hi,
Please take a look at the attached spreadsheet. This calculation is based on the sample RLC Circuit which is located in the Samples Folder >> Analysis >> Monte Carlo Analysis.
In essense the Sigma value is based on the Output Y Value and it shows what the peak value is on a specified distance from the calculated sigma of the entire data.
Hope this helps.
Regards,
Tayyab R,
National Instruments.
Attachments:
Monte Carlo Results.zip ‏9 KB

Similar Messages

How does the integration between CRM and SD occur

How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanks

Hi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon

How is the Integration Realized

How is the integration Realized...
Is PHP/Java Integration Bridge certified to run with Web AS.

Hello Ram,
AFAIK the PHP Extention SAPRFC is currently not certified by SAP. Hope that this will change in future. The Java Connector comes directly from SAP and is supported.
Regards
Gregor

Health Management application.How can the integration be possible?

Hello everyone,
My name is Ayorinde Adunse and I am an upcoming Java Developer based in Lagos,Nigeria.I developed interest in Java about a couple of years ago and made it a natural choice for developing applications.
Of recent Ive been trying to develop an application that manages health insurance and premiums calculations here in Nigeria.At present it is an idea though,because existing technologies are already in place for certain orgainisations although there could be improvement.
What I am trying to do is to develop a client application that can connect to a database on a host system and manage patients health records(and also their health history in the event of subsequent hospital visits),and I know that would not be a problem,since the JDBC API can handle that.But I know that eventually there would be problem as different hospitals that would eventually be using the application around the country would have their data on their systems and this information would need to be put up on an online database server managed by admin from Health management organisations in the country(who would be able to view statistical data on hospitals in each local government and state around the federation and have a right to notify erring hospitals of improper conduct or financial irregularities), as well as funding organisations and ultimately the insurance companies who would be responsible for paying the insurance premiums on claims made by a specific hospital(s)( an admin representative would also be able to view the online database containing information on each hospital to facilitate payments).This would enable a financial and statistical report be sent to each hospital on a monthly,quarterly and yearly basis.
I am specifically interested in how the integration of this data is to be done especially since the internet is not fully established in Nigeria and there are some remote villages that would not have internet connection and so the desktop application would have to be used(otherwise this would have been a web application with hospital management having login details and a management system for each hospital). The analysis of the data would involve population of women and children registered for the proposed insurance scheme in each local government,and ultimately,in each state of the federation,as well as the financial reports and calculation of claims for each registered hospital under a health management organisation(s).
Please,I need your help,on suggesstions on the relevant architecture,I know you guys out there are really good and I would need suggesstions.I would really be grateful as I am so stuck.This is my first major enterprise application.I would really be grateful.
Thanks,
Ayo Adunse.

Hi Ayo,
Interesting concept, you are proposing to build a distributed application so you'll need a VPN(Virtual Private Network) .In Nigeria the only way you can establish a VPN is via the internet.So internet connectivity is compulsory for any client(browser,swing or J2ME).Then again, you could make it a web application with the appropriate security measures in place this will do just fine.Good luck pal.
You could reach me at [email protected]
Benni
SCJP 1.4 | SCWCD 1.4 | SCBCD 5.0

Extended Classic Scenario - how does the integration work ?

Hi,
Apologies for asking a basic question, but we are looking at requirements for integrating SRM with R/3 using the extended classic scenario and I need to understand how the integration actually works ? How is the data transferred between the 2 systems ? Does it use BADI's, idocs etc ?
Many thanks,
fiona

Hi Olaf,
I just wanted to give some precision on what you said (in the thread How to "see" PO in EBP ? also)
The Extended classic scenario only refers to the local PO creation replicated in R/3.
In this scenario, in the R/3 PO only the data not managed/sent from the SRM are available for modification (which depends on the SRM version you use)
The "PR transfer from R/3" is called "Plan driven procurement", and in this scenario only RFC is used, the qRFC are only used for BDocs of the CRM Middleware.
Regards.
Vadim

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

How is the sigma calculated in monte carlo analysis?

Hi All,
I wonder how the Sigma is calculated in Monte Carlo Analysis.
I read the User Guide, it said the Sigma is related to Resistence value.
But seems the process of calculating the Sigma in User Guide is not correct...
Would anyone be able to provide some more details on the Sigma caculation?
I attached the Monte Carlo Analysis' result.
After some days' research, I can not figure out the caculation process...
Any help would be appreciated.
Thanks,
Gavin.
Attachments:
Monte Carlo.PNG ‏36 KB

Hi,
Please take a look at the attached spreadsheet. This calculation is based on the sample RLC Circuit which is located in the Samples Folder >> Analysis >> Monte Carlo Analysis.
In essense the Sigma value is based on the Output Y Value and it shows what the peak value is on a specified distance from the calculated sigma of the entire data.
Hope this helps.
Regards,
Tayyab R,
National Instruments.
Attachments:
Monte Carlo Results.zip ‏9 KB

How to do quick calculations within a cell

for example, I'm making a spreadsheet to track my expenses on my trip ... going through receipts, if a cell already has a value in it and I want to just add to that number without having to run to a calculator ... how?
also, how do I make the header and very first column sticky so that they float no matter where I am in the spreadsheet?
thanks!

I'd like to add detail to what was already suggested. You could press = and enter in the amounts and operator easy enough, similar to a calculator. Or you may want to enter each amount in its own cell, then sum them up in a separate cell.
For instance, in a column, enter each amount. Then either
- select the cells in the column, and from the toolbar, click on Function and choose Sum.
- or, in a cell type =SUM( and select the cells you want to sum. Their references will be entered into the formula automatically.
For something more structured and ongoing, you could set up several tables for expenses. Then set up a summary table.
You can get as detailed as you want. For example, you can have a table for each category of expense: one for Hotel Expenses, one for Food, etc... Or you could break it up by date: one table for all the expenses for Day 1, one table for Day 2, etc...
Also, you asked about sticky headers. If you view sheet in Print View, then the headers repeat on each page. Not perfect, but a workaround.
I mentioned the multiple table setup because it seems to me Apple may have left the sticky headers out of Numbers to encourage thinking about setting your data up in multiple tables. This has taken me a little time to get used to, but now that is pretty much how I think about it when setting up any spreadsheet. Breaking it up into multiple tables, then the lack of a sticky header is less of an issue (although I agree it would still be nice to have).
(Sorry if this detail is too basic. I imagine a novice user finding it useful).
gluck.

How does the Centre of mass calculation within the Vision particle analysis function work?

I have been using the particle analysis function to establish the centre of mass of some particles. However on analysis some of the stated CofG's are clearly wrong. Does anybody know why this could be or how you can access the code that performs the calcution to check it?

mattmc wrote in message news:<[email protected]>...
> I have been using the particle analysis function to establish the
> centre of mass of some particles. However on analysis some of the
> stated CofG's are clearly wrong. Does anybody know why this could be
> or how you can access the code that performs the calcution to check
> it?
Hi,
I don't think you can access the code that performs the calculation,
because that is NI's DLL, unless they let you see the source C/C++
code. But I know one algorithm to get the mass center is using the
moments calculation,
m(p,q)=double integral over x^py^qf(x,y)dxdy, and the mass center is:
Xc=m(1,0)/m(0,0), Yc=m(0,1)/m(0,0)
As a matter fact, you can see m(0,0) is actually the area
size of the
particle.
Irene
www.geocities.com/irene_he

How to print Integrity sql in the preparedstatement?

How to print Integrity sql in the preparedstatement?
Connection conn = null;
String sql = "select * from person where name=?";
PreparedStatement ps = conn.prepareStatement(sql);
ps.setObject(1, "robin");
ps.executeQuery();
i'm wants print Integrity sql.
For example:select * from person where name='robin'
How should I do?
thanks a lot!

PreparedStatement doesn't offer methods for that. You can write your own implementation of PreparedStatement which wraps the originating PreparedStatement and saves the set* values and writes it to the toString().
If needed, myself I just print the sql as well as the values-being-set to the debug statement.Logger.debug(query + " " + values);

How SAP standard run the interest calculation in AR module

Dear expert,
would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
Please help.
Regards,
Karen

Hi,
Thank you for the promtp reply.
I still have query would like to seek for your advise.
1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
a)How the program calculate those overdue invoice for example: does sap calculate the interest base on interest + due amount until the customer made the payment?
b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
Please help.
Regards,
KH

How can I POST data within the same page if I have a A HREF -tag as input?

How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

you can use like this or call javascript fuction and submit the form
<form method=post action="/mypage">
cnmsdesign.doc
</form>

How to - correct episode order within the Remote App

Recently I found that when i was using the Remote App to control my iTunes Library, all my TV Show episodes where in alphabetical order instead of episode number order.
after searching on how to solve this and speaking with Apple Support (who couldn't figure out why this was happening) i couldn't find the answer and noticed that many people were having this same issue and were in the same boat as me.
i managed to solve the issue and wanted to share. sorry if i have posted this in the wrong area, first time giving advise on here.
ill run through this using The Walking Dead - Season 1 as an example, but this can obviously be done with any TV Show.
Even with the correct episode numbers, iTunes displays the episode in the correct order -
but in alphabetical order within your library on the remote app -
in iTunes - highlight all episodes and get info
     2. under the Options Tab, change the Media Kind to Music Video and click OK at the bottom
     3. Then head over to where you Music Videos are stored
     4. select each of the episodes, get info
     5. under the Details Tab, you will now have more options to select
     6. scroll to the bottom of the Details Tab, and within the Album Artist section, type in "The Walking Dead"
     7. in the Disc Number section, you want to add which season of how many seasons there are. example - I have 4 seasons of The Walking Dead within my library, and as this is season 1, i will enter 1 of 4
     8. next, in the Track section, you want to add which episode of how may episodes in that season. example - this is episode 1 of 6 in the season
     9. next go into the Options Tab, and change the Media Kind back to TV Show
     10. click OK at the bottom
     11. once you have done this for each episode, head back into your TV Shows
     12. when you now get info for each of the episodes, the Album Artist, Disc Number and Track sections should be at the bottom of the Details Tab (if they were not there before)
     13. if this has been done correctly - all episodes should be correctly listed within the remote app by episode order
Hopefully this has helped somebody out there!

Gotcha - came up with a workaround... since the photos were living in the Photo Library packaged itself, and not simply in another regular folder, I right clicked on the library and said show packaged content, then search for what folders the files lived in, then copied the files out of the packaged library into a folder. Then I was able to give the Photos Library access to the new folder with the files.
With all my files now references, I enabled iCloud Photo Library and am uploading now.
Hopefully my new local Photo Library will be smart enough to optimize local images and shrink to give me more space.
Thanks.

How to use the integrated camera in Lenovo THINKPAD X301

Dear All,
I would like to know how to use the integrated camera for the THINKPAD X301 LAPTOP?
Please help

Hi ,
For Lenovo product , we need application software to activate this camera. You can use the Picasa software which can search from Google to activate this camera.
After install Picasa > Picasa > Import > Select Device ( then choose your camera )

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How is the integral calculated within Biobench

Similar Messages

Maybe you are looking for