How is this cool effect done,...

Hi.
I came across this cool effect, does somone know how the
flying paper to the dancer was made?
Both if possible, paper going across and the dancer..
http://www.swfmagician.com
thank you

jon47 wrote:
> Hi.
>
> I came across this cool effect, does somone know how the
flying paper to the dancer was made?
>
> Both if possible, paper going across and the dancer..
>
http://www.swmagician.com
Did not see the paper but the dancer is a video imported into
flash.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

  • How is this amazing effect done,.

    Hi.
    I came across this cool effect, does somone know how the
    flying paper to the dancer was made?
    Both if possible, paper going across and the dancer..
    http://www.swfmagician.com
    thank you

    It comes with effort and patience! This effect is simple...
    tweening... give it a go and see what you can achieve through trial
    and error, you will get far more out of it than copying someones
    walkthrough.

  • How is this cartoon effect done? HELP!

    Hey I can't seem to figure out how to do this effect. It's a cool effect that I noticed pewdiepie uses when photoshopping in his videos. Ignore the creepy *** photo, but it's an example of the effect.

    D Fosse wrote:
    Why do I get the feeling this is the next Photoshop splash screen...
    Eeeek!!!
    The Oil Paint guess is just for the hair I assume?  A couple of plugins that would do similar are Fractalius, and Topaz Clean, but if you have CC 2014.2.2 then you could get close with Render Flame, and clip Hue/sat and curves layers to the flames to sort out the colour and contrast.

  • I am reloading Photoshop CS2 and I can't get it activated. How is this to be done?

    I am reloading Photoshop CS2 and I can't get it activated. How is this to be done?

    The activation servers are retired and so your old CS2 copy and serial number no longer work.
    Adobe has non-activated Photoshop CS2 and a new serial number to go with it only for CS-CS2 owners.
    Get this here at:
    https://www.adobe.com/cfusion/entitlement/index.cfm?pid=4485850&e=cs2_downloads

  • How was this "flash" animation done?

    How was this "Flash" animation done?
    http://www.templatemonster.com/flash-templates/15812.html
    There is a "flash" that goes down the sholder of a man in this Flash intro page. It is a series of jpg images. Do you know how this can be done or which program was used? I want to chage the page of it.
    Thanks, Steve

    Hi Steve,
    I'm pretty sure it's done with a mask. You have the man picture layer and the border layout masked by a symbol (maybe a square or rectangle) above it.
    If you want to know how to use mask in Flash, just ask Google. There is a bunch of tutorial on the web.
    Hope it's a good start for you !
    Martin
    http://www.martinc.biz

  • I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?

    I want replace my desktop with a iPad to do emails and Microsoft office work. Can this be effectively done? What's the downside if any?

    I'll go down your list one by one.
    1. Access mail - which I know that the iPad can do.
    Enough said.
    2. Save an excel or word or ppt of PDF attachment for review.
    You can view these types of documents natively on the iPad as Tgara has mentioned.
    3. Open an review and maybe change a excel or word file.
    There are many apps that allow this.  I personally prefer Apples iWork programs, Pages, Numbers, Keynote.  They tightly integrate with iCloud.
    4. Resave such above files.
    With Pages, Number, Keynote you can save/resave files in iCloud and locally.  Also you could use dropbox to save your files on dropbox and provide a way for you to share a folder with coworkers/family and they can add/view/review files from there and you can see the changes on your device.
    5. Reply to a mail attaching a file.
    This is possible in many ways.  From dropbox, or another app you can email files with the share button.
    6. Be able to rename files and store them in specific folders.
    This goes back to dropbox/iCloud.  iOS doesn't really have a traditional file system.  If you save a PDF it isn't saved anywhere you can just open it.  You would have to open an app that supports view PDFs and select the PDF you wish to view.  The same goes for documents, spreadsheets and etc.
    Hopefully this helps answer your questions.

  • How do i create this cool effect?

    http://www.youtube.com/watch?v=ae_DKNwK_ms&feature=channel
    i love this style and have seen it get used heavily but i have now idea what it is called. what should i google?
    could someone please let me know what programs were used to make it?
    can this be done in flash? or is it encore and after effects?
    is there a tutorial out there?
    are there other/better examples?
    thanks!

    3DS Max?
    so nothing in my master collection can do this?  thanks for the direction. i'll start exploring, i just hope there some way to do this without spending another $3k on software...

  • How is this Flash Site done?

    I'm trying to make a site like www.georgespencer.com
    Any ideas how its done?

    well mayb..bt i'm having difficulty figuring out two
    functionalities here..
    1. when you click on any thumbnail..it zooms and navigation
    buttons appear at the sides..if you move to any other clip and then
    click on the "ZOOM OUT" button the movie zooms out at the clip
    where it had stopped. How do i detect which thumbnail was on the
    screen when the zoom out btn was clicked?
    2. when u reach a the end of any row or column u have an
    option to move the 1st clip of the next row e.g.
    if you reach at the end of the 1st row..the right arrow btn
    changes to another button which then slides down the Movie to the
    1st clip of the 2nd row.. how is dis done?

  • Any ideas on how/if this can be done

    Is there a way to get Coldfusion to be able to recognize new
    inserted data
    and 'refresh' the screen? I guess the best example of the
    idea would be for
    a chat room where when the user enters new text, it
    automatically appears on
    the screen. I am using the cf widgets typed Flash.
    Wally Kolcz
    Developer / Support

    ColdFusion? No. It runs on the CF server, not on the client
    and cannot
    have a hand in initiating activity from the client.
    You need to use something like Flash or - buzzword of the
    month - AJAX.
    (I don't know what you mean by "I am using the cf widgets
    typed Flash", but
    maybe you're already part-way down the Flash route...?)
    Adam

  • Creating a cool effect/transition... how to do this?

    Trying to think how to do this without any special program like After Effects? It's a transition I suppose, between two shots... I've seen it done a lot to music or to add drama to the cut.
    Instead of just cutting straight from ShotA to ShotB, you flash ShotA and ShotB back and forth quickly, finally landing on ShotB. For example, the sequence would be like: ShotA ends - ShotB - ShotA - ShotB - ShotA - ShotB - ShotA - ShotB - ShotA - ShotB - ShotA - ShotB - ShotA - then finish on ShotB as it continues. Each flash might be a percentage of a second long, so the total transition time might total a second or two. Think of a DJ scraping a record back and forward to produce that hip-hop, rap sound.
    Obviously it can be done with major amounts of labor manually on the timeline, but I want to know how one easily can create this transition. If it's a pushbutton effect in some piece of software please direct me to the software I should consider which might already have this and other cool effects and transitions that are pre-made?
    Thanks!
    Premiere CS3 on a Sony VAIO; Vista; 4G RAM; 2.33GHz Dual Core....

    > Good reason to use the Razor Tool
    Right. Maybe it would be easiest to nest it as a muti-camera sequence first, razor, choose A or B.
    You could also...
    1.) place B on a track above A
    2.) create two opacity keyframes: one at 100%, one at 0%
    3.) Set the interpolation of the keyframes to "Hold"
    4.) Copy / paste the two keyframes at intervals to achieve your effect
    I think this option is best, as you can easily copy/paste the effect and apply it to other pairs of clips, like a transition.

  • Nice alpha text reveal. How is this effect done?

    I want to do a nice alpha reveal with text and particles as in this trailer for the film Lovely Mollie here: http://www.filmweb.no/trailere/article453327.ece
    How is this done? I'm guessing a liberal use of Trapcode form, but how is the text revealed? I'm thining maybe an alpha matte but is there an easy way of doing this type of effect.
    Any help appreciated!
    Cheers

    Thanks guys, I've tried out the roughen edges before but need to get the middle of the letters alpharing out too, and of course the text to sand tuts.
    Cheers!

  • How was this drop shadow line effect done?

    Does anyone know how to reproduce the effect?
    Thanks

    Check these out:
    Old Stock-Adobe Illustrator Actions ~ Actions on Creative Market
    Make sure you watch the video on that page

  • How was this effect created?

    Hi,
    Can anyone tell me what was done to create the cool effect at this site?
    www.robbiecrawford.com
    When the links on the left are rolled-over an image appears in a small window that follows the cursor. Very cool.
    I was hoping to learn how to do that, myself, but can't figure it out. No need for a step-by-step tutorial, just a word or two to point me in the right direction.
    THANK YOU!

    It could essentially involve a movieclip that follows the mouseY property with a minor bit of tweening to a stop, possibly triggered by a MOUSE_MOVE event.  Hover over/out of the individual menu items loads/unloads a preview image in the movieclip.

  • How was this done (Stacking)?

    Hello!
    How was this effect done? http://www.riccardomagherini.com/fine_art/, I think I know how it is finished in PS, but how do you shoot this?

    Hi Alex,
    this tool is usually called the Blur or soft-focus effect (translated from my German PS). Many programs offer this brush for applying to the effect. Often you can select the photo, create a soft edge selection and then make the selection using filter blurred or you yourself blur some of the image areas.
    And we have the tool "Unsharp Mask". For this purpose, only the original image and a blurred version are required. The layer structure, however, shows good results only if your program supports 32-bit color depth, like Photoshop.
    On the other hand, I'm sure you will get better explanations, by asking Riccardo Magherini himself at http://www.riccardomagherini.com/fine_art/contact/. I'm sure you will get answers marked of a professional competence and responsibility.
    Hans-Günter

  • I want to establish a new and separate Apple ID from my husband's.  We have six Apple devices between us that are aleady associated with our current joint ID.How is this done?

    I want to establish a new and separate Apple ID from my husband's.  We have six Apple devices between us that are aleady associated with our current joint ID.How is this done?

    In order to have a separate 5GB of storage he would need to have his own iCloud account with a separate ID.  You can still share the same ID for iTunes; it does not need to be the same as the ID used for iCloud.
    In order to migrate his phone to a separate account, begin by saving any photo stream photos that he wants to keep on his phone to the camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos he wants to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud on his phone, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  Other devices still using the account will not be effected by this.)  When prompted about what to do with the iCloud data, choose Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to his new account.
    Finally, if there is any merged data in the accounts you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want from each account.

Maybe you are looking for