How is Upgradation Process takes place?

Hi Experts,
I sincerely thankful to all who are providing solutions here. I have recently moved to Up-gradation environment from 4.6c to 6.00 ECC. But I need your help before i start up with pace in this assignment. Please give me an Idea at what point
Up-gradation takes place and how it starts and where it ends.I would really appreciate If anyone can help me How to start this in step-wise method.
Thanks in Advance,
Kanna Palle.

Hi,
Check with links.
1. SAP R/3 4.6 C to ECC 6.0 Upgrade using CU &UC method- Unicode conversion
2. http://service.sap.com/erp-upgrade.
3. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c08e5899-1444-2a10-e489-ef6ffbf13146
Regards,
Srini Nookala

Similar Messages

Where does the processing take place when using a remote front panel?

Hi,
I am considering upgrading my LabView software from 6i to 6.1 for the new "two click" remote front panel feature. I have already seen a demo of this feature but have just a few questions before I get the upgrade:
My setup consists of several pieces of equipment connected to Labview via GPIB, to aid in the evaluation of a new microchip.
1. I wish to grant control of the setup to anyone with a web browser, Is the remote monitoring feature compatible with both Netscape and IE?
2. The VI which controls the setup is currently located on the PC beside my setup. When I embed a VI in a remote front panel, where does the processing take place, is the local VI still controlling the setup? and
the remote panel just sending and receiving data from the local VI.
Thanks, Troy

> I am considering upgrading my LabView software from 6i to 6.1 for the
> new "two click" remote front panel feature. I have already seen a demo
> of this feature but have just a few questions before I get the
> upgrade:
>
> My setup consists of several pieces of equipment connected to Labview
> via GPIB, to aid in the evaluation of a new microchip.
>
> 1. I wish to grant control of the setup to anyone with a web browser,
> Is the remote monitoring feature compatible with both Netscape and IE?
>
Yes. Provided they are resonably modern versions.
> 2. The VI which controls the setup is currently located on the PC
> beside my setup. When I embed a VI in a remote front panel, where does
> the processing take place, is the local VI still controlling the
>
setup? and the remote panel just sending and receiving data from the
> local VI.
>
The computer which we refer to as the server, the one with the GPIB card
in your case, will execute as it does now. In fact, its window will
even be open. The remote client computer, the one with the web browser
will be running the runtime engine and processing user events, value
change and property/method events from the server. So in reality, both
computers will be sharing the load a bit. This allows for very small
packets to be sent between the computers. It is in fact quite similar
to publishing the data between the computers using datasocket.
One thing to keep in mind. Standard LV includes a license for one
connection. If you want to allow for multiple web browsers to view at
the same time, additional licenses are available. Also, only one user,
remote or server may be in control of the panel at a time. That means
that if you want to be able to operate the panel, changing kn
obs or
flipping switches, the others will become viewers only until you give up
control. Hopefully this isn't a surprise, but I thought you might want
to hear about it now.
Greg McKaskle

How the account determination takes place for cost center

Hai
Can any one explain me in detail (as i am new to this topic) how the account determination takes place when i raise a P.O for cost centre and do G.R for the same? If possible pl send me links also related the above.
Thanks

Hi,
Once u have given account assignment category 'K', then system will pick automatically G/L account from the OBYC settings for the combination of Valuation modification code, account modifier (VBR) & Valuation class.
From the OME9 transcation, system will pick transcation key for the respective account assignment category.
For the account assignment category 'K', account modifier is 'VBR'.
Here masterial master record (MMR) is optional. If you are giving MMR in the PO, system will pick valuation class from the MMR.
If MMR is not giving, then system will pick valuation class from the transcation OMQW. Here you need to maintain valuation class aganist material group, which is u r giving in the PO. ( This is optional)
In the OBYC transcation, for the transcation key GBB you need to maintain G/L account for the combination Valuation modification code, account modifier (VBR) & Valuation class.
Also maintain one more entry in the transcation key GBB, maintain G/L account for the combination Valuation modification code, account modifier (VBR) & Valuation class field is blank.
Once you have given account assignment category 'K' in the PO, system will pick G/L for the combination Valuation modification code, account modifier (VBR) & Valuation class. This is happening before giving the cost centre.
If you are not maintaining MMR in the PO and not maintaining valuation class aganist material group in the transcation OMQW, the system will pick G/L account for the combination of Valuation modification code, account modifier (VBR) & Valuation class field is blank.
So in your case, check valuation class aganist material group in the transcation OMQW and maintain G/L in the OBYC for the respective combination. If valuation class is not maintained aganist material group in the transcation OMQW and maintain one more entry in the OBYC with the blank valuation calss field.
Regards
KRK

How does account determination take place ??

dear experts
pls enlighten me on how excatly account determination take place .
what is an account grping code
what is transaction event key
what is the technical name for keys used in OBYC like BSX , WRX GBB etc
what is the other keys like VAX ,INV used within GBB called
what are WE,WR etc
How are movement types linked to valuation
Is it possible to create/change all of the above ??
Regards
Anis

Hi
Check in OMJJ -Mvt type - update control - with your parameters (purchase order/production order, stock type (Q or E etc)..Otherwise you can use OMWN directly.
1. Initial entry (561)
For this entry BSX and GBB-INV
2.GR against PO(101)
BSX and GR/IR ( -)
3.issue to Cost Center (201)
GBB-VBR and WRX
4.Issue against Prod Order(261)
BSX and GBB-VBR
5.Sale (601)
BSX and GBB-VAX(-)
7.Subcontracting ( material sent as component & consumed against 543)
BSX(+) and GBB-VBO(-)
8.Sucontracting ( material procured )
9. Invoice Verification done where applicable.
This is similar to material revaluation (if you are performing revaluation in MIRO)
then BSX(+) Vendor
otherwise WRX and Vendor (-).
These are the standard postings keeping aside other differences like PRD, PRA etc. You can check mvt types for postings.
If you want to know how valuation groping code, transaction key, account cat.reference alters the account determination then use OMWB Tcode and enter material, plant, choose movement type and click simulation.
Thanks
Edited by: Praveen Raghavendra on May 4, 2009 12:08 PM

How does the payment take place ? does apple withdraw the price of the apps automaticly from my card?

how does the payment take place ? does apple withdraw the price of the apps automaticly from my card?

Yes, that is correct.

CPROJECTS - How does the calculation take place ?

Hi,
I am wokring in cprojects. I have done the following entries
cost revenue rate - defined
amount costs - 50 US dollars /Hrs
amount revenue 10 US dollars/Hrs
different revenue - 1.0 US dollars / Hrs.
resource assigned and staffed for 20 hrs
After calculate costs the value shown are
proj defn -
20 hrs----
costs 89.80 USD
projet role -
20 hrs -
costs 39.80 USD
responsilbe person - 20hrs - costs 39.80 USD
Can anyone please explain me how this calculation takes place in cprojects 3.1.
Please do the needful
Regards,
Amit

Hi Amit,
don't understand how this calculation result can be caused. In general it should be:
for a role: (hours - hours already assigned to resource) * role rate
+ hours assigned to resource * resource rate (is assigned in the business partner)
Regards,
Thorsten

Step by step process takes place in QM

hi gurus
could u please let me know the step by step process that takes place in quality management module.Not as per the real time scenario just for the training purpose.

Hi Naveen,
I`m fwdg the steps of QM cycle in Procurement and Source Inspection
Scenario: You need to inspect raw material received from the vendor at plant premises.
Basic Settings needed in IMG (PRIOR) : Control Key for QM in Prcmt
                                                   Certificate Type
Master data needed : Material Master (ROH)
                       Master Insp. Characteristics
                       Inspection Plan
Steps :
1.     MM01 : Create Raw material
In QM View in Material Master :
Give Certificate type. QM Control Key and ensure QM Proc. active
Click Insp. setup
Assign insp. Type 01 GR Insp. for order, by selecting new insp. Types.
                                      Ensure it as active plan, by ticking the active indicator.
2.     Goto QS21 , create Master Inspection characteristic
Give Status as Released and Complete copy model for mic
Select Quantitative characteristics and tick the relevant indicators i.e., in this case Lower specific limit, Upper specific limit and Check Target value.
Press Enter
It`ll prompt you for entering lower, upper and target values for the MIC ,
Enter the values.
SAVE
3.     GOTO QP01 Create Inspection Plan with status Released (4) and Usage GR (5)
-     Click operations, Create Insp. Operation and give the control key as QM01
                       - Select the inspection operation and click on the insp. Characteristics,
                           assign the MIC you`ve created and press enter. All the characteristics
                           will be copied.
SAVE
4.     GOTO ME21N Create Purchase Order
5.     GOTO ME28 or ME29N Release Purchase Order with both 1 & 2 Status
6.     GOTO MIGO GR for Purchase order
                           Check in where tab : give storage location
                           Check in Purch.order details tab : Give certificate enclosed status: YES
                               Ensure item ok indicator is ticked
                               Post (SAVE)
Now the inspection lot gets generated as you post the goods.
7.     GOTO MMBE You can observe that the stock is moved to Insp. Stock automatically
8.     GOTO QA32 Inspection lot selection
Give Material and Plant Execute
Select your inspection lot line, and select result recording.
{Incase, if it is not allowed to record results, GOTO QE02, give insp. Lot and select Change Insp. Lot Icon, give the relevant task list usage and press TASK LIST button in the Inspection specification Tab and then SAVE}
Give inspected quantity and target value that is checked
SAVE
You can find in QA32, that the status is changed to INSPECTED
Now again select the insp. Lot in QA32 and goto Usage decision,
Give UD as A for accept and Quantity to be moved to unrestricted use stock
SAVE
REFRESH
9.     GOTO MMBE
Now you can observe that the stock has moved to Unrestricted use
Source Inspection Steps :
ME41- CREATE REQUEST FOR QUOTATION
ME9A-MESSAGE OUTPUT (REGD. QUAL. AGREEMENTS, TECH. DELY. TERMS. ETC.)
ME21N-CREATE PURCHASE ORDER
ME9F-MESSAGE OUTPUT ( REGD., PURCHASE ORDER)
QI07-WORKLIST OF SOURCE INSPECTION
QA11-UD FOR SOURCE INSPECTION
MIGO-GR
MIRO-CREATE INVOICE
MRBR-RELEASE INVOICE
QC55-CERTIFICATE PROCESSING
QF11-DEFECT RECORDING
QA11-UD FOR GR
QA12-INCASE TO CHANGE QUALITY SCORE
QA13-TO CHECK HISTORY CHANGES
Reward if useful and close the thread.

Flashing BIOS - how long should process take?

if you flash the BIOS from within Windows on a notebook - how long should the process take? is a black screen normal?

There really isn't much of anything that you can do at this point. About the only thing to try is unplug any USB devices that are connected to the laptop and pray. If that doesn't fix it you'll need to take it to a service center to have it repaired. That will more than likely cost you in excess of $100 US unless you have access to an eprom burner and the knowledge and skill to use it. Since you had to ask what to do next when the bios update failed, the chances of your having one and knowing how to use it are essentially non-existent.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

How 2 use Progress Monitor.. when u dont know hw long process takes place!

hello frnds,
I am trying to use ProgressMonitor.. to show user that required process is taking place.. so wait for a while!!
what before i was doing is to miimize the frame for that time and popping it again.. :-).. was really silly of me..
setExtendedState(JFrame.ICONIFIED);
NewProject(); // This function takes time..
setExtendedState(JFrame.NORMAL);I was wondering that cant I use progressmonitor for that time.. but I dont know how long that function runs.. so may be now I have to use separate thread for it..
well even word THREAD haunts me.. so much.. .. never tried in my code.. If you people helps me how to put thread.. in my code..
so that I can show dialog ProgressMonitor for that time.. I would be grateful.. even i dont know whther thread is really necessary for what am trying to do.. !!
Thanking in advance!!
gervini

see if this makes any sense
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Testing extends JFrame
ProgressMonitor pmon = null;
public Testing()
 setDefaultCloseOperation(EXIT_ON_CLOSE);
 setSize(200,100);
 setLocation(200,100);
 JPanel panel = new JPanel();
 JButton btn = new JButton("Run");
 btn.addActionListener(new ActionListener(){
 public void actionPerformed(ActionEvent ae){
 pmon = new ProgressMonitor(null, "","",0, 100);
 new Thread(new LongTask(pmon)).start();}});
 panel.add(btn);
 getContentPane().add(panel);
public static void main(String[] args){new Testing().setVisible(true);}
class LongTask implements Runnable
int percentDone = 0;
ProgressMonitor pm;
public LongTask(ProgressMonitor p){pm = p;}
public void run()
 someMethod();
public void someMethod()
 for(int x = 0; x < 100000000; x++)
 if(x % 1000000 == 0)
 percentDone++;
 pm.setProgress(percentDone);
 pm.setNote("Task is " + percentDone + "% complete");
 //try{Thread.sleep(200);}catch(InterruptedException ie){}//may need this on a fast pc
 if (pm.isCanceled()) return;
}

How does DB Operation takes place

Hi Gurus,
I have a question in the DB Operation of Select.
Scenario:
    I have a SELECT Query on a table which runs for around 1 hour.
    After the select process is started at the 30th Minute there is an UPDATE Statement being fired on that table and committed.
    Now when the SELECT Query completes execution after 1 hour and returns the result, will it display the OLD Value of the record or the NEW Updated Value of the record.
My assumption is that when the SELECT query is fired it will fetch the data from DATA SEGMENTS and store it in the SGA Buffer Memory and then return the result.
When the Update statement fires it will update the data in the DATA SEGMENT. (more over i believe that the physical location of that record in data block would get changed during a UPDATE)
So when the SELECT statement completes execution it will take the data stored in SGA buffer and return the result.
Please confirm what is the correct answer. How does Oracle Architecture handles this.

Hi,
Ranganathan -Oracle wrote:
Yes Understood that.
So if that select statement which i use is for showing some data in Front End and if user see the OLD value and if he uses that value for manipulation, then the changes of that update statement will be lost and is mostly a Data Loss in the system.
Do we have any option to avoid this.
You can have this problem if you don't write good application.
The way to avoid this problem it's also mentioned in the page I have posted:
Oracle Database maintains data consistency by using a multiversion consistency model and various types of locks and transactions. In this way, the database can present a view of data to multiple concurrent users, with each view consistent to a point in time. Because different versions of data blocks can exist simultaneously, transactions can read the version of data committed at the point in time required by a query and return results that are consistent to a single point in time.
Let's say that you in your application you have a product list and you have an edit button beside each product. If you want to prevent other users to make a change until your transaction is completed you can lock the row when you enter into edit mode (i.e. SELECT FOR UPDATE) and release the lock (with commit or rollback) when the transaction is completed or cancelled.
This will ensure that the row cannot be updated by other transactions.
Regards.
Alberto

How long dose processing take

i orderd a ipad2 with engraving to day when will it stop processing

When they have manufactire it, engraved it and it is ready to ship. Your purchase is in line in the order it was received. Humans build the iPad, mostly by hand. Humans can only build so many in a day.

How long did your guys' processing take?

I ordered my 16Gb ipad 3 on sunday, they were in stock.
to this day, the order is still "being processed" how long will processing take? how long were you guys processing for?

I am not employed by Apple, and anyone who does cannot give any official news, just technical assistance if they are even try to walk that fine line. We are just users like you.
So no one here can answer your question.

May I know how data load takes place in essbase

Hi all,
Since I am new to hyperion i need to know some details about Essbase.Last month we faced one issue.Whenever a data load takes place it clears the previous years data and loads only loads the current years data.May i know the reason for this.
And also i want to know how the data load takes place in Essbase.
With thanks and regards,
babu

I m okay with above statements ... Now i am going to add something else..
Above mentioned in how many ways we can load the data from different files..now what am i trying to say is we can also use "Calc script" to load the data...
You know how?
thru "Datacopy" we can load the data value(s) into another member(s)..You can see in session dialogue box while running the Calc script (Which it contains the "Datacopy") that will show data load in progress..
And also make sure that every time you won't do copy the data from SQL,Excel..etc ... it may be you can have the situation to copy the data from one server to another server...think in that way will be another good advantage for you..
i hope you understand this....
Regards,
Prabhas

How pacman upgrade work?

Hi, I am new to Arch and curious about how the upgrade process work. I was uing ubuntu and some debian based linux, when I did an kernel upgrade, it will install the new kernel and I had to reboot to boot into the new kernel. In the same time, the old kernel was still exist in my machine. I just did pacman -Syu and upgarde the kernel in Arch. I don't see any old kernel left. Can someone explain the process to me? Do I need to do some cleanup work after the upgrade? Thanks

From man 8 pacman:
HANDLING CONFIG FILES
Pacman uses the same logic as rpm to determine action against files that are
designated to be backed up. During an upgrade, 3 md5 hashes are used for each
backup file to determine the required action: one for the original file
installed, one for the new file that´s about to be installed, and one for the
actual file existing on the filesystem. After comparing these 3 hashes, the
follow scenarios can result:
original=X, current=X, new=X
All three files are the same, so overwrites are not an issue Install the
new file.
original=X, current=X, new=Y
The current file is the same as the original but the new one differs.
Since the user did not ever modify the file, and the new one may contain
improvements or bugfixes, install the new file.
original=X, current=Y, new=X
Both package versions contain the exact same file, but the one on the
filesystem has been modified. Leave the current file in place.
original=X, current=Y, new=Y
The new file is identical to the current file. Install the new file.
original=X, current=Y, new=Z
All three files are different, so install the new file with a .pacnew
extension and warn the user. The user must then manually merge any
necessary changes into the original file.

HT4539 How long does it take to download itunes match?

Hello,
I subscribed to itunes Match 2 days ago and it is still downloading, does anyone know how long this process takes?

iTunes Match is a service. There is no software to download or upload. What is happening is your iTunes library is being mirrored in the cloud by iTunes comparing what is in your library to what is availble on the iTunes Store. Any tracks that are not "purchased" or "matched" will be uploaded. How long the process takes is dependent on the size of your iTunes library and the upload speed of your internet connection. Based on these two things the process can takes hours, days, or weeks. Just be patient.

How is Upgradation Process takes place?

Similar Messages

Maybe you are looking for