How JCWDE can support RSA 1024

hello
can some one please tell me how JCWDE can support RSA 1024.
thanks

Hi Chris,
Based on my research, RSA_EXPORT1024_DES_CBC_SHA is a previous cipher suite, which is supported, you can enable it use
SSL Cipher Suite Order policy setting under Administrative Templates\Network\SSL Configuration Settings.
More information for you:
TLS/SSL Cryptographic Enhancements
http://technet.microsoft.com/en-us/library/cc766285(v=WS.10).aspx
Best Regards,
Amy

Similar Messages

How to add a Cipher Suite using RSA 1024 algorithm to the 'SSL Cipher Suite Order' GPO

Following a VA test the Default Domain GPO has been set to enable the SSL Cipher Suite Order. Following the change Symantec Endpoint Protection Manager doesn't work properly as the the Home, Monitors and Reports pages are blank and an Schannel error is
logged in the SEPM server's event log.
I have spoken to Symantec and I have been told that we need to allow the RSA 1024 bit algorithm but they can't tell me which cipher suite this would be. I have looked in the GPO setting and can't see an RSA 1024 suite but have found some in this article:
http://tools.ietf.org/html/draft-ietf-tls-56-bit-ciphersuites-01
I want to know how to add an additional cipher suite into the setting safely. Am I able to just add the suite into the GPO setting (eg TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA) or do I need to do anything else beforehand?
If anyone has any advice regarding this or cipher suite orders and troubleshooting SSL problems it would be much appreciated,
Thanks
Chris

Hi Chris,
Based on my research, RSA_EXPORT1024_DES_CBC_SHA is a previous cipher suite, which is supported, you can enable it use
SSL Cipher Suite Order policy setting under Administrative Templates\Network\SSL Configuration Settings.
More information for you:
TLS/SSL Cryptographic Enhancements
http://technet.microsoft.com/en-us/library/cc766285(v=WS.10).aspx
Best Regards,
Amy

I purchased 2 itunes ecards and they were not received and I am unable to edit them. support is non existent!! Any ideas how I can cancel these since they weren't received?

I ordered two itunes cards tonight and my granddaughter didn't receive either of them!
I was unable to obtain online support of any kind.
The gift view will not allow me to edit the gift, delte or change it.
Any ideas how I can delete these from my account? Itunes support is non-existent!!

She's checked the spam folder on her email account as well as the inbox ? You should also be able to try resending it (and double-check the email address) : http://support.apple.com/kb/HT1541
If you can't then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful.

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?

For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the  menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x)

HT1386 Please contact itunes support to complete this transaction how i can solve this problem on my iphone 4s IOS 5.1.1

Please contact itunes support to complete this transaction how i can solve this problem on my iphone 4s IOS 5.1.1

Do as directed & contact iTunes support:
http://www.apple.com/support/itunes/

I just purchased Adobe Acrobat XI Pro, but installation didn't work. At the last step said that it'd fund an error. Any idea? How i can contact Adobe support? I have a new Macbook Pro Yosemitte ..

I just purchased Adobe Acrobat XI Pro, but installation didn't work. At the last step said that it'd fund an error. Any idea? How i can contact Adobe support? I have a new Macbook Pro Yosemitte ..

Hi Francis,
Could you please let me know how have you been trying to install Acrobat?
Please ensure that you are signed in as admin and antivirus software is disabled at the time when you install.
Regards,
Anubha

Hi, I know how I can correct an inconsistency in the Firefox 4.0 beta 8, the error is: "sorry your browser is not support program by web dympro. " In IE there is a compatibility option firexfox view settings but can correct this error.

Hi, I know how I can correct an inconsistency in the Firefox 4.0 beta 8, the error is: "sorry your browser is not support program by web dympro. "
In IE there is a compatibility option firexfox view settings but can correct this error.

Hi, I know how I can correct an inconsistency in the Firefox 4.0 beta 8, the error is: "sorry your browser is not support program by web dympro. "
In IE there is a compatibility option firexfox view settings but can correct this error.

I'm using Adobe CS we reinstall windows then we need to activate program by internet but it can't then we try to activate by phone it also can't no longer support by phone how we can do ? please advise

i'm using Adobe CS we reinstall windows then we need to activate program by internet but it can't then we try to activate by phone it also can't no longer support by phone how we can do ? please advise

Tomzeer please see Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products where this topic has been discussed.

In production Support , how i can acquire the knowledge

hi
please anybody can suggest me, in my project now documentation is going on, and coaching( they will coach us for few days which type of tickets will be there...) will be there in couple of days which is provided by client people, here i want to know which type of questions we can pose b'z before i never work on support , how i can acquire more knowledge from them
regards
Shah

Hi, I am in a different situation where we will be taking over support for over 15 functional modules (ie. CCS, BW, PM, FI/CO, MM, XI, etc.) and we need to pose numerous questions for the transition process (more or less knowledge transfer from our client to us). Right now I have several questions, but need some more so that I am not missing anything. Here are some of the questions I have currently:
1) Provide all SAP Functional Modules
2) Provide SAP interfaces
3) Provide desktop, web & application servers
4) How is performance monitored
5) Is there 3rd party scheduling tools
6) Provide list of databases used
7) Provide SAP system landscape, how many environments, source systems, how everything is connected
8) What is the SAP release and the current support packs applied
9) Provide your Transport Strategy
10) How is data loaded, how often, for which areas of SAP and how is it validated after load is completed?
11) How many users?
12) Hours of support operation?
13) Impact to business as a result of failure
14) What are the security and roles for each SAP module
15) What is security requirements to provide access to SAP
16) What is the backup, recovery & archive schedule and strategy
17) Is there any Q&Adb available, if so where is it located?
18) Additional Documentation: Technical Specs, Functional Specs, Business Requirements/Blueprint, DB structure tables, BPP's, Config docs, Landscape configuration
19) Are there any user exits or ABAP modifcations?
20) What is the comfortability of the users on each module? How much training did they recieve? Where are the training docs located?
21) Are there BPP's? How detailed? Where are they located?
22) Are there Config. Docs? How detailed? Where are they located?
23) Are there Technical & Functional Specs? How detailed? Where are they located?
24) Does your users have access to BPP's and who owns them? How are they updated?

How to know if my HP Pavilion Notebook can support Super Multi Blue-Ray drive?

Hi,
My HP laptop is:
HP Pavilion dv6-6093ex Entertainment Notebook PC support
LM610EA#A2N
How to know if my HP Pavilion Notebook can support Blue-Ray drive?.
I need to install a Super Multi Blue-Ray drive, with these capabilites::: read and write all types of disc formats in one convenient package: CD±R, DVD ±R , CD±RW, DVD±RW, CD-ROM, DVD-ROM, DVD-RAM and Blu-ray disc.
If it can support, then I must purchase HP Blue-ray device, or I can purchase any other brands, such as LG 16x Internal Blu Ray/DVD/CD Burner Writer Drive + sata data & power cables .
First of all: my Optical drive is: LightScribe SuperMulti DVD±R/RW with Double Layer Support, and with the capabilities
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random Access, Supports Writing, Supports Removable Media
Read capabilities CD-R, CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working properly
Config Manager User Config FALSE
Drive E:
Media Loaded FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id 1
Status OK

Anyway, Could you please confirm for me this the Maximum resolution of my VGA is 1366 by 768 pixels, and cannot be extended.
That is correct. It cannot be extended. That is the limit for the built-in display. Using an external display that is capable of higher resolution might help in that matter but then you loose the portability of the laptop.
I came across a free BluRay player just this week, it is found here. Leawo Blu-ray player: http://www.leawo.org/blu-ray-player/
It is the only free BluRay player I have found.
That is about all I can do to help. The other possibility would be to get an external Bluray drive that can fulfill all your expectations, give you lightscribe, and possibly a BluRay player included with the purchase. It would be much less worrisome on your part and there would not be any modifications to the laptop.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

How to show the status for all CPU? Solaris 9 & 10 can support how many CPU

Hi, may i know wat is the command to show all of the CPU status? i tried use "top" command, but could show all. Any Idea?
And somemore, may I know Solaris 9 and 10 can support how many CPUs?
thanks
regards
raymond

What do you mean all of the CPU status?
top shows you processes on all processors and for the currently running processes, it shows you which CPU a process is on.
If you want separate stats for each processor, "mpstat 5" shows cpu usage and idle etc.
As far as how many CPU's solaris supports.
The largest machine Sun sells as far as I am aware is a E25K with 72 dual core CPU's
for 144 cores. Is that big enough for you? You probably don't want to know the price though :-).

How soon can N78 support in Nokia Multimedia Trans...

I'm a Nokia's user who lived in China...
I used the Nokia N72 to connection with a mac so it can be work (using a Nokia Muultimedia Transfer)
I bought a N78 yesterday.It's so cool in the FP2 OS.but it can't be work on Mac(Nokia Multimedia Transfer).I changed the N73 to N78 from iSync,it can be work.
How soon can Nokia Multimedia Transfer support the nokia N78
Solved!
Go to Solution.

Hi,
I think Nokia has updated NMT. If you are running NMT 1.3, you can check for updates from within the application which will bring the latest version of the application down but Still NMT 1.3 Beta.
But the web site has NOT been updated yet(Still no support for N78).
Check now...........
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

How fast can Broadcom 802.11n support for maximum?

hey everybody,i got U160 yesterday that the WLAN adapter is Broadcom 802.11n but i just got a connection speed of 65Mbps but i can get 150 Mbps with my G230 with intel 5100 bgn ,connecting to the same N-Router,so i am wondering how fast can Broadcom 802.11n support for maximum.......

if readycomm installed, remove it.
check your firewall is active and using high performance.
by the way, which model of broadcom are you using?

HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car

- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

How JCWDE can support RSA 1024

Similar Messages

Maybe you are looking for