HOW KIND OF Standard table related with vk11, vk12 and vk13?

HI, EVERYONE,
HOW KIND OF Standard table related with vk11, vk12 and vk13?
I want to know about how many and how kind Standard table related with vk11, vk12, vk13.
I'v found some table like konp and a601 ~ a609, also I want to know about those table of uses?
I am starting to study about vk11.
please help me.

Hi Reena,
Then main pricing related tables are KONH header details, and KONP item details.
The other tables your have mentioned like A601,A609.............. all these are condition tables, which stored the values which you save for access sequence combination.
Eg : For condition type PR00, lets us assume one key combination customer/material, so these details will be saved in condition table which is initially generated with fields as a part of condition techinque.
So here the table would be A005 i guess or its A006.
So like wise there will be condition tables for each key combination.
Regards
v K

Similar Messages

Table Relation with Payment and Invoice of Vendor

Hi all,
     I have one question about Table Relation with Payment and Invoice of Vendor.
     the scenario is.
     2 Purchase Order number : 100000001/100000002
     1 Invoice document number : 200000001 which include 2 Purchase Order.
     1 Payment document number : 300000001
     How should I found out table relation from Payment document number - Invoice document number - Purchase Order number. ?
      I try to link the following table, but it does not work.
      RBKP     *     Invoice Receipt
      RSEG     *     Invoice Receipt document line item
      BKPF     *     Accounting Document Header
BSEG     *     Accounting Document Segment
PAYR          Payment Medium File
BSIK          Accounting: Secondary Index for Vendors
BSAK          Accounting: Secondary Index for Vendors (Cleared Items)
BSIS          Accounting: Secondary Index for G/L Accounts (Open Items)
Does any one know about it ?
Regards
KY Chuang

Hi Venkatesh,
Thnx a lot for the reply. This has almost solved my problem, however there's one thing left. when I'm trying to take a print out after exporting the info into an excel sheet, the information really looks scattered, i.e., is there a way where we can go ahead and get the info in a rather unscattered manner.
I've tried to take a print directly without actually transferring the info into an excel sheet, then each of the vendor is printed in a separate page, which again they feel is a problem.
So, if you have an idea pls suggest.
Thnx again for the information.
regards
sandhya

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

How to reject external table rows with some blank columns

How to reject external table rows with some blank columns
I have an external table and I would like to reject rows when a number of fields are empty. Here are the details.
CREATE TABLE EXTTAB (
ID NUMBER(10),
TSTAMP DATE,
C1 NUMBER(5,0),
C2 DATE,
C3 FLOAT(126)
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY EXT_DAT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
LOAD WHEN (NOT (c1 = BLANKS AND c2 = BLANKS AND c3 = BLANKS))
LOGFILE EXT_LOG_DIR:'exttab.log'
BADFILE EXT_BAD_DIR:'exttab.bad'
DISCARDFILE EXT_BAD_DIR:'exttab.dsc'
FIELDS TERMINATED BY "|"
LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL
FIELDS (
ID,
TSTAMP DATE 'YYYYMMDDHH24MISS',
C1,
C2 DATE 'YYYYMMDDHH24MISS',
C3
) LOCATION ('dummy.dat')
REJECT LIMIT UNLIMITED
So, as you can see from the LOAD WHEN clause, I'd like to reject rows when C1, C2 and C3 are empty.
The above statement works fine and creates the table. However when I am trying to load data using it, the following error is produced:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "not": expecting one of: "double-quoted-string, identifier, (, number, single-quoted-string"
KUP-01007: at line 1 column 41
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
It seems that external tables driver does not understand the "NOT (...)" condition. Could anyone suggest how I can achieve what I want in a different way?
Thank you.
Denis

Another method would be to simply remove the "LOAD WHEN condition" and create a view on the external table which filters the data.
CREATE EXTTAB_VIEW AS
SELECT * FROM EXTTAB
WHERE not (c1 is null and c2 is null and c3 is null);

Work flow and tables related with ESS Travel Module

Hi Experts,
I am new for work flow. Presently I am working for SAP ESS / MSS Travel module. Can you please let me know the names of work flows and tables related with ESS Travel module.
Regards,
Gary

Hi Gary,
Check if this [thread1|Let us learn SAP ESS Travel] [thread2|Travel Management Tables] helps you.
Regards,
Saumya

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1. The problem is that after inputing the formatting gets lost. Taking in account high popularity of Wordpress I suppose the problem is quite serious.

How to solve the problem related with inputing of the text into Wordpress from Firefox 9 and 9.0.1.
The problem is that after inputing the formatting gets lost.
Taking in account high popularity of Wordpress I suppose the problem is quite serious.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Clipboard not working -> [http://kb.mozillazine.org/Clipboard_not_working]
* Rich Text Editing -> [http://kb.mozillazine.org/Rich_text_editing]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
Check and tell if its working.
Might not be related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

How can i use jpg extension with forms 10g and webutil

I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
image jpg and image item has no jpg extension .
How can i use jpg extension with forms 10g and webutil ?

You can use the JFIF image format for jpg files.

How do create a slide show with both video and photos in elements 12

how do create a slide show with both video and photos in elements 12

Hi Brian
You can batch process a set of prepared slides from Full Edit (see image) using:
File >> Process Multiple Files
In the PMF dialog you can choose filename, date, or description (caption)
Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
Click image to view

I live in Germany at the moment. How can I buy iPad mini with retina online and get tax free?

I live in Germany at the moment. How can I buy iPad mini with retina online and get tax free?

Do you qualify for a tax free purchase? The online stores will collect the required taxes for their country and region. I know in the USA, if you are a tax free corporation, and you purchase it directly with a corporate account, you can get an item tax free using the company account and the corporations registered tax exempt number. But an individual citizen cannot avoid paying the appropriate required taxes when shopping the online Apple web store.

How to populate internal table field with text data?

Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test,     IO Test 1, CHAR,       20
ZEA_IO2, CHA, IO Test,     IO Test 2, CHAR,       20
Here is the Code:
*& Report ZAS_BAPI_TEST                                               *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects.              *
*& Text file will hold the Info Object Structure. Text file will be    *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure          *
*& Step 2. Retrieve/Load text file into Internal Table structure       *
*& Step 3. Call BAPI Function to Create IO                             *
*& Step 4. Call BAPI Function to Activate IO                           *
REPORT ZAS_BAPI_TEST                           .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
      Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
        io_name like BAPI6108-infoobject,
        io_type like BAPI6108-type,
        io_txsht like BAPI6108-textshort,
        io_txlng like BAPI6108-textlong,
        io_datatype like BAPI6108-datatp,
        io_length like BAPI6108-intlen,
      END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
      PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
     Copy the file from the workstation to the server        ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_file
               FILETYPE                = 'ASC'
               HAS_FIELD_SEPARATOR     = SPACE
               HEADER_LENGTH           = 0
               DAT_MODE                = SPACE
               CODEPAGE                = SPACE
               IGNORE_CERR             = ABAP_TRUE
               REPLACEMENT             = '#'
               READ_BY_LINE            = 'X'
             IMPORTING
               FILELENGTH              =
               HEADER                  =
TABLES
    data_tab                = itab-bapi[]
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
   ELSE.
     pit_data[] = lit_data[].
   ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
           20 itab-bapi-io_type,
           30 itab-bapi-io_txsht,
           50 itab-bapi-io_txlng,
           75 itab-bapi-io_datatype,
           85 itab-bapi-io_length.
endloop.
      SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = ''
      def_path         = 'C:\'
      mask             = ',Documentos de texto (*.txt), *.txt.'
      mode             = ''
    IMPORTING
      filename         = p_file
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
    concatenate p_file '.txt' into sel_file.
else.
    sel_file = p_file.
endif.
      Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
    VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
    VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
    VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
     COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
     ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
     NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
     ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
     HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
     ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
     RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
      Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM.                    " RETRIEVE_DATASET
I appreciate your help.
Regards,
Mau

I have used tab delimited file.
Here are file contents
io_name     io_type     io_txsht     io_txlng     io_datatype     io_length
ZEA_IO1     CHA     IO Test     IO Test 1     CHAR     20
ZEA_IO2     CHA     IO Test     IO Test 2     CHAR     20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish

How can I add table fields with existing structure ?

I like to add PSTLZ field to stucture KOMGG.Is it possible to add table field with the existind structure.If yes how can I do this?kindly help me on this.

hi
go to se11
in change mode select the button append
create new append which starts from Zpstlz in this komgg structure and add data element and domain to this field and activate with request number
then in field catalogue this field should be visible ,here ends your append
now it is ready to use in condition tables.
reward if helps !!!!!

How to filter standard ALV report with custom UI element?

Hello Expert,
I got a requirement to filter standard ALV report based on the custom UI element (which is created in the screen before displaying the ALV report). Upon entering the values in the Custom field, the ALV report is displayed accordingly.
Any ideas how to approach it?
Thanks,
Mohammed

Hi,
Okay, let me explain the steps in detail
Let us say you have alv table with 10 records and alv table is shown first time with all 10 records
Create an internal table in component controller's attribute GT_ORIGINAL_DATA and save all 10 records into this table first time
Now, user enters value in FILTER_MATNR field 123 and press apply_filter button or press enter key
Read the value of field filter_matnr and get the only matching records from global internal table GT_ORIGINAL_DATA into local internal table as below
          data lv_matnr type matnr.
          data lt_data   like wd_comp_controller->gt_original_data.
               " read the value from context attribute of filter_matnr
                    lv_matnr = ???
               " copy all data into local table
                    lt_data[] = wd_comp_controller->gt_original_data.
               "delete the records which does not match
                 delete lt_data where matnr NP lv_matnr.
Now, bind the data lt_data to context node of alv table
Hope this helps you.
Regards,
Rama

How to bind internal table values with RootUIElement(Table) from select Que

Hello Friends,
       In my view Layout,there r two Input fields ,Submit button and Table... My concept is when user posting values in two input fields and clicking submit button means the result(more than one values) should be displayed in Table...
     I written coding also but i dont know to bind internal table values with Table... My code as follows,
method onactionsearch .
   data:
     Node_Node_Flight                    type ref to If_Wd_Context_Node,
     Elem_Node_Flight                    type ref to If_Wd_Context_Element,
     Stru_Node_Flight                    type If_View1=>Element_Node_Flight ,
     itab TYPE STANDARD TABLE OF sflight.
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
   Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
@TODO handle not set lead selection
   if ( Node_Node_Flight is initial ).
   endif.
get element via lead selection
   Elem_Node_Flight = Node_Node_Flight->get_Element( ).
@TODO handle not set lead selection
   if ( Elem_Node_Flight is initial ).
   endif.
alternative access via index
Elem_Node_Flight = Node_Node_Flight->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Node_Flight is initial ).
endif.
get all declared attributes
   Elem_Node_Flight->get_Static_Attributes(
     importing
       Static_Attributes = Stru_Node_Flight ).
select * from sflight into CORRESPONDING FIELDS OF TABLE itab
WHERE carrid = Stru_Node_Flight-carrid and connid = Stru_Node_Flight-connid.
Node_Node_Flight->bind_table( new_items = itab ).
endmethod.
Plz reply me asap...!

Hi,
What I understood from your coding is...
* navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
Node_Node_Flight = wd_Context->get_Child_Node( Name = IF_VIEW1=>wdctx_Node_Flight ).
You are reading values from the above node and binding the values to the same node.Am i right?
Did you take seperate context node for your input fields or binded the above context to the fields.If not then read the context attribute values which are binded to the carrid and connid then pass these values to select query.
One more thing is select cardinality 1..n for node NODE_FLIGHT since you are displaying more than one record.
Go through the some basic tutorials.Search in sdn you will it get.Already there is a tutorial in sdn which explains exactly what do you require.
Go throgh this link
Web Dynpro for ABAP: Tutorials for Beginners
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Edited by: suman kumar chinnam on Mar 26, 2009 10:50 AM

How to populate a table column with marked text?

I hate searching and typing so I was just wondering if there was a solution to the following problem.
I have a document that contains 5-character defect codes in the body of the text (in numbered steps). At the end of the document I have a table which summarizes these codes: the codes make up one column and the other columns contain information related to these codes (page number, area, actions to be taken, criteria for defect etc.).
Is there a way for me to mark the codes such that I could import all of them into the defect code column?
I was leaning towards generating a list of some kind and then pasting it in the column but I can't seem to paste my generated list into multiple cells. FM will only allow me to paste the whole list in one cell. Am I using the wrong approach or maybe missing a step in between?

Thank you! that was very helpful and it solves my problem to a great degree. I didn't think of converting the list to a table--now I just have to delete the page numbers, since they are included in the table, but in another column
FYI, I couldn't use cross-reference markers because the defect code (according to the style guide.) is written at the end of the instruction, on the same line without a hard return. Cross referencing brought in all the text in that paragraph if I used a <paratext> building block to define my cross-reference format. I lack the knowledge to create a cross-reference format that would just give me the last five characters of the paragraph. These tables tend to be long and even if I could do that, for each row, I would have to click about seven or eight times per entry
Thanks again.

HOW KIND OF Standard table related with vk11, vk12 and vk13?

Similar Messages

Maybe you are looking for