How lab view can be used for signal analysis of hf signals recrded in field

im interested in using labview tool to analyse hf signals in terms of removing noise ,amplipying signal strand identify modulation schemes used

The kind of things you mention are certainly within LV's capabilities. When you say "HF" what frequencies do you mean?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How many devices can you use for your itunes account?

how many devices can you use for your itunes account?

PT wrote:
Macistotle wrote:
Unless you have DRM still haunting your tunes ... Then you can only use those songs on 5 devices. Otherwise, connect as many as you like (as stated above).
No, you can sync your DRM tracks to an unlimited number of iPods (but only authorized to play on 5 different computers/user accounts)
Patrick
So I can sync two iPods to my iTunes account and sync the same digital copy movies that come with some o' my DVDs to both ipods? Do movies make a difference really, DRM-Wise? Thanks in advance.

How many devices can i use for one apple-id

Hi,
My question is how many devices i can use for one apple-id.
And where am i going to find the answer?
Thanks,
Vermeulen Francis

You may read this discussion: https://discussions.apple.com/thread/3695326?start=0&tstart=0.

How many iDevices can you use for the same apple id?

Id just like to know for future refence if i get an iMac etc.

As many as you can afford...
You can load protected content on up to five computers. Those computers can load content onto any device. You can select up to ten computers and iOS devices to recieve automatic downloads of your purchases.
tt2

How many Keywords can I use

Hello A question about Keywords.
How many keywords can I use for each page?
And is there a loot for HTML <head> optimalization?
Ton

Hi,
Take a look to this Article,
http://forums.adobe.com/message/6042953#6042953

Do you know if Assessment Filter fields can be use for reports?

Do you know if Assessment Filter fields can be use for reports?
I have an Assessment filter field in contacts that it use to capture relavant information for the contact. Because I thought we could use it as another picklist. But when I am creating a report I can find it in the list of fields available for the report.
Thank you very much
Catalina Valadez
Regards

Hi thank you for the answer but a have another point.
I am not using asssessment as an object, I am just using the field "assessment filter 3" that is one's of the default field for contacts that you have for customize the application. So I thought it will be show in the list of fields for the reports (Going to Reports -> Design Analysis -> under reporting choosing "Contacts") and I can't see this field, when I'm looking in "Contact Fields".
Regards
Catalina Valadez

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2

How pinnacle can be used for streaming video for mac app?

How pinnacle can be used for streaming video for mac app?

Hi naturalfemale,
As mentioned in the referring article, closed captioning content has to be specifically added/enabled to a video for closed captioning to function:
Additional Information
Not all videos include caption or subtitle tracks. Check the documentation for the video you are using to see if it includes these features.
OS X: Using captioning features in Mavericks
http://support.apple.com/kb/HT5910
At the moment, I do not believe there is an option for universal captioning.
Regards,
- Brenden

HT1515 Can I use Air Port express as a signal extender for SKY Broadband router in UK?

Can I use Air Port express as a signal extender for SKY Broadband router in UK?

You are going to have to turn OFF Wifi on the Sky router device so its just a modem.
String an Ethernet cable off of the Sky router to an Apple Airport/Time Capsule device and have that create a stable WiFi network.
Using WDS protocols you can now add additional Apple Airport expresses as needs be to extend the Wifi signal area.
In theory you should able to extend an existing network however inter-operability between differing manufacturers is flaky at best.
Caveat using extenders Will degrade the performance of your network.
So its going to be more expensive - Need Two Airport devices and you my need support in creating the network (you may have to log in to the Sky provided routers advanced settings in the Java Control Panel and from a web browser to turn off features such as Wifi and IP addressing)
You may be better contacting Sky as they may actually have a compatible network extender (BT certainly do for their Home Broadband routers) available.

I have a Student creative suite 5.5 for how many computers can I use it?

I have a Student creative suite 5.5 < for how many computers can I use it?

What exactly means "will not accept"?

How much HD's can I use for my Xserve G5 RackMac3,1

How much HD's can I use for my Xserve G5 RackMac3,1 and with ??? TB?
Thanks

Hi
Not quite sure what you mean by "how much?" If you really mean 'how large' then Apple's Support Article might help?
http://support.apple.com/kb/HT1219
Failing that and if you browse this Forum, you'll find some people have had some success with 3rd-Party 1TB (and perhaps larger) SATA drives:
https://discussions.apple.com/thread/2702491?tstart=120
XServe G5 takes up to a maximum of 3 drives. You must use Apple's own Drive Modules. If you want to configure the internal drives as a RAID 5 (minimum of 3 drives required) you will need a compatible RAID Card installed.
Your mileage as ever will vary.
HTH?
Tony

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How many PVDM4 can be used in 44xx for IP services?

The PVDM4 Q&A says:
Q. Where are the PVDM4 DSPs installed?
A. Unlike previous generations of PVDM2 and PVDM3 DSP modules, the PVDM4 modules are installed directly on the T1/E1 NIM. Depending on the number of channels required, the appropriate DSP module is installed on the NIM.
For IP services such as transcoding and conferencing, the PVDM4 DSP module can be installed on the motherboard of the 4451-X ISR platform.
What it does not tell: when I am in need for more than one PVDM4 DSP module (more than 256) for IP services, can I install the additional one on dummy NIM modules and use the PVDM4 module on the NIM modules also for IP services?

Yes, resources not used in the NIM can be used for IP services

I am trying to open a website that is using Microsoft content viewer, and the page does not show. Any ideas on how to view this site using firefox. It works on IE.

I am participating in an online class whose website uses Microsoft Content Viewer to view the class content. The browser opens a new page, but nothing is there. At the top of the tab it says Microsoft Content Viewer, and nothing else. Can anyone tell me how to view my course using Firefox? I would prefer not to use IE, but it works there.

When originally creating the pdf, you would need to choose another pdf conversion setting. In Word if you use the pdf menu, change your settings there: Adobe PDF > Change Conversion Settings. I would use High Quality Print instead. If you use the File > Print method, click the Properties button next to the Adobe PDF printer selection.
For your already created form, you can change the file so your users will not encounter issues. In Acrobat 9, which hopefully is similar in process to 8: Advanced > Preflight > Profile tab > PDF/A compliance > Remove PDF/A information.(You'll have to unsecure your form first).
You can read about PDF/A files in the Help.

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

How lab view can be used for signal analysis of hf signals recrded in field

Similar Messages

Maybe you are looking for