How large is a typical repositry?

I am trying to install Oracle Designer 6i, however, while I install the repositry it chewed up over 3GB space before finish on my server even I select the "small" option! I have to abort it for available disk space.
Here is my question: How large is a typical repositry for Oracle Designer?
Your reply is valuable to my disks arrangement.
Thanks..........John

Just built a 600 MB project into flash (A little more than 1/2 the size of 1 gb) and the finished flash files totaled 46 Meg.
Great feature and I recomend the upgrade.

Similar Messages

How long does it typically take to update new apple products? I'm speaking in terms of software/firmware updates. My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working great.

How long does it typically take to update new apple products? I'm speaking in terms of software/firmware updates. My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working flawlessly.

I appreciate the responses, however my initial post was too vague. I apologize and will explain. The specific issues are the window closes occasionally when loading something large, that has ceased in the last day or two. My battery life is no where near the second gens, is that the extra hardware at work? I thought that had been accounted for? One of the frustrating, albeit humorous occurrences is when I placed the second and third gen within 1 foot of each other, turned off LTE, and streamed a video. From every location the second gen out ran the new model on 3G signal, lol. Not a huge deal since I have wi-fi or LTE pretty much everywhere I am, but disappointing none the less.
The new apple tv is great, except for the same thing everyone is posting about. HD iTunes library streaming taking overly extended load times. I don't expect it will take too long for apple to address that issue. I'm new to apple, last 6 months, but they seem to have excellent support! It is definetly highly rated.

How large should a disk for time machine be vs the hard disk

Can anyone tell me how large a disk for time machine be vs the size of the hard disk?

I usually say 2x or more but your milage may vary on that based on how much your hard drive is actually used, what sort of data (how large the files are) you typically handle and how far back you want your TM backup to go.

In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are. This is a very valuable function and it seems to have disappeared. Anyone know where it is?

In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are. This is a very valuable function and it seems to have disappeared. Anyone know where it is?

Go to the View menu and turn on the Status Bar. If you don't see the menus, go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards.

How large can an internal hard drive be on a Mac Pro part #ZOD8 ?

How large can an internal hard drive be on a Mac Pro part #ZOD8 ?

Mac Pro tower can support drives up to 4TB is size.
If running 10.8.4, 10.8.5 or 10.9.0, there is a bug in Disk Utility that precludes proper erasing of drives over 2.2TB as Internal drives

How large of a backup drive should I get for my 500 GB MacBook Pro?

I have a MBP with a 500 GB hard drive. How large of a backup drive should I get for time machine backups? If I get a 500 GB drive will it just back up everything twice (as I have 250 used) and then delete the second backup every time it rebacks up so I will just have 2 backups? Or does time machine only backup changes every time it backs up? Thanks in advance.

tehsnyderers wrote:
OK, so I ordered a Seagate 1.5 TB external drive. That should suffice for my iMac w/ 320 GB and MBP w/ 500 GB shouldnt it?
Probably. See #1 in the Frequently Asked Questions *User Tip* at the top of this forum.
Should I just partition it 750/750? or maybe 600/600/300
Use roughly the same proportions as the data on the two Macs, adjusted for how you use them. If one changes lots of big files frequently and the other doesn't, give more space to the first one.
so I have space to put random files as well?
If you put important stuff on a 3rd partition, you can have TM back it up, too (unless the drive is attached to your Airport), but it will send you a warning reminding you that it's not a good idea to have both originals and backups on the same physical disk. You'll be much better off finding another way to back that up, perhaps archiving to CDs/DVDs.
Am I able to partition it and use it with my airport extreme?
Officially, no: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
and: http://support.apple.com/kb/HT2426
But some folks (including me) are doing it anyway!
So if it works for you, just be aware it's technically unsupported, and you'll get little or no help from Apple if there are problems. And a future update may break it.

How large of a hard drive can i put in my Macbook Pro (early 2011)

how large of a hard drive can i put in my Macbook Pro (early 2011) and where can i get one?

You can find answers to both at OWC as well as installation tutorials. I think you will find 1 to 1.5 TBs are the largest.

I want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

"At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
Personally I would double these amounts and add to that the diskspace needed for your Windows games.
Stefan

How large of a storage device would I need to back up my macbook pro that says I have used about 150G of my 232G hard drive?

How large of a storage device would I need to back up my macbook pro that says I have used about 150G of my 232G hard drive?

RJ Lange wrote:
So eventually you could end up using more data space in a back-up drive than the original drive, huh?
With TimeMachine, yes.
With a bootable clone, no. Provided you don't save the backup states changes which CCC is doing now.
I prefer a straight clone backup, I keep many copies of clones on seperate hardware to "go back in time" with and thus avoid saving the changes with my clones.
I swear I tried to back up my computer on a 250g G-Drive and it told me there was not enough room. But I am not positive if the entire drive was available or not. I may have had it sectioned into 150 & 100 sections and I might have tried to back it up on the 150 section. or I might be imagining that.... either way, it didn't work.
Your data is going to grow, 232GB is rather small for a boot drive.
So your going to be needing storage drives eventually, just plan ahead and remmeber hardware redundancy is key.

How large a partition for Win-based programs?

I have a 500 GB hard-drive, and plan on creating a partition to run Win XP or Win 7 and the following Win-based programs: QuickBooks Pro, Quicken '09, Family Tree Maker, Dragon Naturally Speaking, and Business Plan Pro. Any suggestions as to how large I should make this partition? It seems to me that the largest files I create on my notebook are with the OSX-based programs, suggesting a smaller partition might be adequate. Thanks.

Gerald Regan wrote:
I have a 500 GB hard-drive, and plan on creating a partition to run Win XP or Win 7 and the following Win-based programs: QuickBooks Pro, Quicken '09, Family Tree Maker, Dragon Naturally Speaking, and Business Plan Pro. Any suggestions as to how large I should make this partition? It seems to me that the largest files I create on my notebook are with the OSX-based programs, suggesting a smaller partition might be adequate. Thanks.
I think it depends on your usage of those programs and the programs running under OSX. How much data will you create and store within each partition? It will be very deficult for us to guess your usage.
I have a 500GB drive that I partitioned half and half after reviewing what my usage would be. Do an analysis of your usage and storage requirements.

In camera raw how large should I open my raw file before converting it to a TIF file?

in camera raw how large should I open my raw file before converting it to a TIF file---2736 x 3648 (10.0 MP), 3072x4096 (12.7 MP) or 3840x5120? (19.7 MP). I want a sharp TIF file. I'm shooting with an Olympus E-510, 10.0 MP camera?
thanks - Ken
[email protected]

rasworth wrote:
There is no advantage to saving or opening other than at the native resolution.
Actually, not entirely true. In the case of Fuji DSLR's you would do better to double the rez in Camera Raw as that matches the interpolation that the Fuji software does in their higher quoted "effective resolutions"(it ain't real resolution mind you but it can benefit certain image types).
If you know for an absolute fact you need more resolution than the native file has, you really might want to test upsampling in Camera Raw as it has a newly tuned upsample (put in in ACR 5.2) that is an adaptive Bicubic algorithm that is either the normal Bicubic or Bicubic Smoother depending on the size–and that's something even Photoshop can't do.
But in general unless you know for a fact you need the image bigger (or have a Fuji camera) processing at the file's native size is the most efficient.

How large can a PDF be?

I have 50 large PowerPoint files that I want to combine all their slides into a single PDF, is this possible. How large of a file can the adobe software handle, I suspect the final PDF will be large, about 3 gigabytes and 1,200 slides. Yes this is large but can the software handle it without any problems?
Is it possible to create links in the pdf to access certain points in this large file. What software program would best handle my project. Any help or suggestions would be greatly appreciated. Thanks David at Email [email protected]

PDF 1.0 through 1.4 uses 10 digit offsets, which is an unsigned integer (so 9,999,999,999). PDF 1.5 and later support a new type of offset that doesn't have any such limitation and is a 64-bit unsigned integer.
Assuming a modern OS, file system, and disk format, Adobe Acrobat/Reader supports PDFs using the newer offset up to their full 64bit lengths. I can't common on any other company's products.

TS4498 How large a download is this LP X update?

Hello!
I've looked in Apple's release notes & info provided at the App Store, but found nothing about the size of this download. Due to Verizon's 5Gb monthly allowance, I have to be very careful. Wish Apple provided this info for all downloads because it's definitely important for at least some of us, especially people way out in the boonies with no really fast connection, limited monthly allowance, and limited Wi-Fi access. Just started getting 4G in my area, so at least that's good! :-)
One big problem for many of these "App Store only" updates/downloads is that there's no way to stop them once they start and no way to find out how big the download is until actually starting the process.
So, has anyone downloaded this Logic Pro update? If so, about how large was it?
Thanks;
Cagey

To The Art Of Sound:
Thanks. Good to know. Sure beats having to go through a super huge download just because of a small update! :-)
To Bill Borez:
Thanks. I was afraid this might be a 600mb or so download, so you gave me a good ballpark.
I now understand that, due to Apple's "Delta" method of updating, an exact download size would depend on each individual's situation, but it would be helpful if they could at least give some sort of estimated size (such as, "between 40 and 80mb"). At least, then a person would know it wasn't hundreds and hundreds and maybe even thousands!
Note: I've downloaded the update and it was, indeed, fairly small, quick and painless. Wahoo!
Extra Note: I had to force-stop an "Additional Content" instruments download about halfway through since I had to leave the place where I was using free Wi-Fi. Since there's no way of actually pausing these downloads, I just went offline to stop it and figured I'd have to start all over again on a future occasion. ... Surprise! The next time I went online (which also involved free Wi-Fi) and opened Logic Pro, a "Resume Content Download?" window popped up, giving a choice to either continue, "decide later" or cancel. Of course, I selected to continue and then the download finished from where it had left off! Nice!

How can i see how large an app is and how much data is stored

In ios7 I could select an app and see it's size and how much data is stored in using it on my iPhone.
I can't seem to locate that option in ios8.1
to refresh and app I had the option of deleting it and reinstalling before based on the information held by the app.
is this clear?
MyFitnessPal is taking a long time to load, thought I would see how large the app is and how much info is stored
but as I've redundantly stated here I can't find that option in my phone now.
thanks in advance for any help you can offer
iPhone 5 iOS8.1

For reference in iOS 7 it is under Settings app > General > Usage.
According to the manual iOS 8 is the same…
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
(page 177)
Usage information
View cellular usage. Go to Settings > Cellular. See Cellular settings on page 179. View other usage information. Go to Settings > General > Usage to:
Display battery level as a percentage
See Battery Usage, including the elapsed time since iPhone has been charged and usage by app
View overall storage availability and storage used per app
View and manage iCloud storage
For me it take a few seconds to load, you may find that the app is being slow to open if it is still downloading some data for it's own caches etc. Try to ensure it has a good internet connection. Obviously it could just be that the service in question is also having issues, so consult their support too.

How large can a LabVIEW Queue in elements and bytes?

How large can a LabVIEW Queue in elements and bytes?

rocke72 wrote:
How large can a LabVIEW Queue in elements and bytes?
In
elements it is likely something like 2^31. In bytes it is most probably
around the same number or better, depending how exactly the different
queue elements are stored. I think they are stored as independent
pointers so it would be theoretically better than those 2^31. In
practice however starting to allocated so much memory in LabVIEW will
always cause problems on nowadays computers. Without 64 bit CPU and OS
going above 2 GB of memory per application is very hard and as far as I
know not supported by LabVIEW.
Also allocating many chunks of memory (like a few million queue
elements holding strings) will definitely slow down your system tremendously eventhough
it will work but the OS memory manager will be really stress tested
then.
Rolf Kalbermatter
Message Edited by rolfk on 06-09-2006 12:24 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How large is a typical repositry?

Similar Messages

Maybe you are looking for