How link Appraisal in Performance Management Module and Person

Hi experts!
I think in Performace Management Module there are these objects:
VA-Appraisal Template
VB-Criteria Group
VC-Criterion
VH-Proces intem+
VJ-Goal
How we should link the objectives, appraisal template, etc. to the employee or employees what we want to evaluate the objectives?
Kind regards,
Julian.

Hi,
the object appraisal template is linked with person object.
meaning person is attached to the appraisal template ( provided ) .
objectives are set in template and then person gets access to template and wherein he fills his objective.
good luck

Similar Messages

HT5622 How do i split work Apple ID and personal Apple ID?

How do i split work Apple ID and personal Apple ID?

You need to read this.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
 Cheers, Tom

Appraisal Create -- Performance Management

How do you implementat a "delegate" role in Performance Management?
The scenario is like this :
The manager has over 100 employee's in her team. The appraisal documents are created in batch in the beginning of the year.
The manager identifies the team lead (four) of them, to conduct the appraisal for their team member's.
Currently we are not able to do delegate that responsibility.
In the appraisal document, we are not able to display the "delegate - appraiser". Nor, can a "delegate-appraiser" (when she logs-in) able to see the appraisal documents created by the manager and delegated to her.
The "delegate-appraiser" logs-in using the BSP documents_todo.htm. Or should a different BSP be used?
Thanks

Are you on ECC 6?
If yes there is a new Enhancement pack 4 comming with new functionalities for MBO , you can check out the features, i feel there are a few features matching your scenario , it may not be a perfect match, still check it out.
Regards
Sameer

Predefined Performance Management Process and Infotype 7409 'Performance'

Hi,
I hope, that anyone can answer my question.
I have configured a predefined Performance Management Process in SAP 6.0 EHP4 and finished the process with an overall assessment of the performance of the employees. However, no data has been written into Infotyp 7409 "Performance". Shouldn't the data of such an assessment be written into it?
The SAP documentation for IT7409 says the following:
"An employee's manager can use a form to assess the performance of the employee. In a talent review meeting, the participants can confirm this performance assessment or reclassify the employee regarding his or her performance.
For each performance assessment that is stored in the talent profile or made in the talent review meeting, the system creates a record for the Performance infotype in the background and stores the ID of the employee's central person in the record (object type CP)."
(http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/2bbb6a72aa4812b834a5ac777f630b/frameset.htm)
However, to be able to add a talent to a talent review meeting, the talent already needs to have an entry in IT7409.
Hence my question: How does the IT7409 get filled?
Kind regards
Daniel

My question seems to have been a problem in fact and seems to have been solved with OSS note 1338701 just yesterday.
Kind regards
Daniel

How to manipulate records inside customized modules and reflect to the seeded modules

If we are going to add custom modules inside Oracle EBS that link to Receivables, how do we create/update/delete records inside those custom modules and make them reflect inside Receivables? Are we going to use also the Interface tables and standard APIs? Can anyone help me on this matter or point me to some reading materials. Actually, I already started reading Oracle Applications Developer's Guide which gave great knowledge on how to start this task.
Thanks in advance.

Jon632 wrote:
If we are going to add custom modules inside Oracle EBS that link to Receivables, how do we create/update/delete records inside those custom modules and make them reflect inside Receivables? Are we going to use also the Interface tables and standard APIs? Can anyone help me on this matter or point me to some reading materials. Actually, I already started reading Oracle Applications Developer's Guide which gave great knowledge on how to start this task.
Thanks in advance.
You can use interface table, or APIs or both.
All APIs are documented in eTRM website -- http://etrm.oracle.com
Oracle Receivables: Receipts API Overview, Setup, Sample Scripts and Troubleshooting (Doc ID 1361075.1)
Oracle Receivables Invoice API: Setup and Sample Scripts (Doc ID 1242202.1)
Oracle Receivables: Receipts API Known Issues and Patches (Doc ID 1362066.1)
Oracle Receivables Credit Memo API: Setup and Sample Scripts (Doc ID 1272600.1)
Oracle Receivables Invoice API: Known Issues and Patches (Doc ID 1306471.1)
Oracle Receivables: Transactions API Overview (Doc ID 1240573.1)
Oracle Receivables Credit Memo API: Known Issues and Patches (Doc ID 1316475.1)
Oracle Receivables Adjustments API: Overview, Sample Scripts, Known Issues (Doc ID 808758.1)
Oracle Receivables Deposits API: Sample Scripts, Known Issues/Patches (Doc ID 266964.1)
How to Register a Receivables Application Programming Interface (API) as a Concurrent Request (Doc ID 785369.1)
Thanks,
Hussein

How to break Veritas Volume Manager mirrors and wipe disks

I have an old Solaris 10 server that is ready to be decommissioned. I would like to go in and break the Veritas Volume Manager mirrors and still be able to go in and wipe each of the two internal disks by using dd or something similar. Below is my Veritas Vol. Mgr. layout. I would greatly appreciate it if someone can post the exact commands (both for the Veritas Vol. Mgr. mirror break and the dd) I would need to run to perform the above tasks. I want to wipe the disks clean as to remove any company proprietary information prior to releasing the system.
Note: I will be logged into a remote console session to perform these actions as the system is in a datacenter and is located in a rack which does not have a monitor.
vxdisk list*
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced rootdisk rootdg online
c0t1d0s2 sliced rootmirror rootdg online
vxdg list_
NAME STATE
rootdg enabled
vxprint -htr_
Disk group: rootdg
dg rootdg default default 0 1113432795.1025.dh22020
dm rootdisk c0t0d0s2 sliced 2632 71121402 -
dm rootmirror c0t1d0s2 sliced 2888 71124291 -
v appsvol - ENABLED ACTIVE 27262976 SELECT - fsgen
pl appsvol-01 appsvol ENABLED ACTIVE 27263493 CONCAT - RW
sd rootdisk-04 appsvol-01 rootdisk 41948280 27263493 0 c0t0d0 ENA
pl appsvol-02 appsvol ENABLED ACTIVE 27263493 CONCAT - RW
sd rootmirror-04 appsvol-02 rootmirror 41948280 27263493 0 c0t1d0 ENA
v rootvol - ENABLED ACTIVE 16779312 ROUND - root
pl rootvol-01 rootvol ENABLED ACTIVE 16779312 CONCAT - RW
sd rootdisk-01 rootvol-01 rootdisk 0 16779312 0 c0t0d0 ENA
pl rootvol-02 rootvol ENABLED ACTIVE 16779312 CONCAT - RW
sd rootmirror-01 rootvol-02 rootmirror 0 16779312 0 c0t1d0 ENA
v swapvol - ENABLED ACTIVE 8389656 ROUND - swap
pl swapvol-01 swapvol ENABLED ACTIVE 8389656 CONCAT - RW
sd rootdisk-02 swapvol-01 rootdisk 16779312 8389656 0 c0t0d0 ENA
pl swapvol-02 swapvol ENABLED ACTIVE 8389656 CONCAT - RW
sd rootmirror-02 swapvol-02 rootmirror 16779312 8389656 0 c0t1d0 ENA
v var - ENABLED ACTIVE 16779312 ROUND - fsgen
pl var-01 var ENABLED ACTIVE 16779312 CONCAT - RW
sd rootdisk-03 var-01 rootdisk 25168968 16779312 0 c0t0d0 ENA
pl var-02 var ENABLED ACTIVE 16779312 CONCAT - RW
sd rootmirror-03 var-02 rootmirror 25168968 16779312 0 c0t1d0 ENA
Thanks much for any assistance on this.

I would boot off of a cdrom and then simply use the format command to wipe the disks individually.
alan
http://www.sun.com/blueprints/0600/scrub.pdf

How to re-enable Manually Manage Music and Videos without erasing all music and videos

I have an iPhone 4S running iOS 8.1.1 and iTunes 12.0.1. When I updated iTunes recently to the new version, 12.0.1 it unchecked the Manually Manage Music and Videos option on my iPhone's summary page. I just want to re-enable this feature without having to spend the time re-installing all my music and playlists. Is there a way to enable this feature without erasing my music and videos?

I've gone from auto-sync mode to manual management before, and the music, playlists, and videos which on the device from auto-sync are not removed when changing to manual.

How can I change "manually manage music and videos" option whitout loose my files?

When I change "manually manage music and videos" option iTunes delete all my files first. This a stupid thing from Apple.
Anybody knows if exists a way to change this option without loose the contents in iPhone?

Denis DCS wrote:
...New iTunes installation...
There's the magic words right there.
The iPhone will only sync with 1 iTunes library at a time. If you want to sync to a new iTunes installation, you have to re-establish the sync relationship, which means wiping the phone and replacing the content with what's in the current iTunes library on the computer.
There is NO WAY around this.

How fast does Labview perform integer, float and matrix calculations?

What is the speed of a modern CPU? Ok it is 3Ghz, one to four cores etc. but how much work can I get done in one clock cycle at this speed?
This kind of questions have been in the back of my head for some time, so I decided to test it. Of course using Labview since it so easy to to use!
I wrote a really simple program that performed 10000 adds 3 to an 32 bit integer in a loop. It then repeats this until 1000ms has elapsed and calculates the MegaInts (or whatever I should call it). I then did the same thing by adding 3 to a matrix of 10000 32bit ints.
On and dual core 3Ghz PC from 2005 I got 261 Mints in a loop, and 1400 Mints in matrix. Only one core seems to be used, CPU load aorund 50%. So every two clock cycles or so I get some work done in a matrix calculation. Also older 1,8Ghz Celeron computers performs about the same in this test, even though they feel very slow in normal use.
On a newer 4/8 core 2,8Ghz PC from this year I got 830 Mints in a loop, and 5900 Mints in matrix. Only one core seems to be used, CPU load aorund 12%. So actually more than one add per clock cycle!
This indicates that either the compiler is smarter than me and does not to all integer adds, or the CPU is smart and do them very fast!
See this as not the complete benchmark of Labview in integer, float and matrix calculations, but as a teaser to make you do your own tests.
Play around and have fun!

Norbert_B wrote:
Yamaeda wrote:
A standard loop only runs in 1 thread,[...]
That is not true.
A standard loop follows the clumping algorithm during compilation. Clumps can be distributed on any number of threads.
So, a standard loop CAN be distributed between several threads.
There are, however, some settings and structures which will result in a single thread per loop:
- Setting the calling VI to "subroutine" priority (not recommended)
- Using a Timed Loop instead of a standard one
- AFAIK: Containing the loop in an InPlace Element Structure with "Data Value Reference" border nodes
There is at least one additional option, but it is so unlikely (as it messes up with most of LV!) that i will not point it out here.....
Norbert
Why would we have parallellization options for a loop if it's already multithreaded? I'd love if loops would automatically parallellize.
If you mean the content inside the loop, then it'll follow ordinary optimization and use several threads if possible. In this case OP mentioned 1 cpu was at 100%.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to dynamically populate a manager name and level for any user who login

Hi All,
I need some help in doing this in my DB:
Table 1 is the the manager hierarchy {which basically shows the structure of every employee's org).
Table 2 is a list of all people manager ( all these usernames will also be in table 1). What i need to find is using the username from Table 2, the highest level that username exists in the manager hierarchy.
For ex:
Table 1: { What this shows is Sam is CEO and Jeff reports to him. So for Sam, he will exist on all 15 levels and Jeff will have Sam has his top level manager and then Jeff will repeat for all remaining levels till 15.
Manager Level 0 Level 1 Level 2 Level 3...Level15
Sam                       Sam     Sam     Sam         Sam
Sam                        Jeff     Jeff        Jeff          Jeff
Now in Table 2:
User Name   Manager Level/Name
Sam               Manager Level 0 Sam
Jeff                 Manager Level 1 Jeff
As you see, for each user name in Table i want to populate their high level from the manager hierarchy {their record in manager hierarchy).
Hope This helps to clear the confusion.
Thanks

Hello,
this is the forum for the tool {forum:id=260}. Please mark this question as answered, so others know that they can ignore it.
Then post again in {forum:id=75}
Regards
Marcus

How to install BMC performance manager?

Please help give some tips, links and share experience. Thanks a lot!

check out
[http://publib.boulder.ibm.com/tividd/td//BSM/SC32-9089-00/en_US/HTML/bsmi270.htm]
[http://www.iona.com/support/docs/artix/4.0/bmc/bmc.pdf]
You may also find relevant documentation somewhere on your software CD.

How to recover after performing an 'Erase' and then 'Partition' within Disk Utility of an External USB drive?

Hi - I accidently ran an 'Erase' and then 'Partition' within Disk Utility of an External USB drive (meant to run it against another drive that was plugged in). Does anyone have any suggestions on if it is possible to recover from this? It has all my family photos on it and my backup is a few months old :-(
I tried running Stellar Phoenix Mac Data Recovery but it found what looks like basic mac folder structure (probably from the first erase). I think what messed me up was that I rain the repartition which formats the drive a 2nd time! Any help is truly appreciated!
thank you,
-Steve

Hello RalphR_MI,
Take a look at this page, which lists several articles. Please let me know if any of these help you restore your backup.
Also, take a look at this article, as well as this one.
I hope this helps. I'm not sure of a few things, so I'm sorry for sending you so much, but I'm confident it will give you something new to try.
Please let me know if this helps. Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Managing work and personal calendars on Nokia 2520

Just ordered a gorgeous red 2520 tablet. Hoping I didn't make a mistake. Is there a way to have it sync outlook thru microsoft exchange for work and also have a private calendar and be able to see both merged on the tablet? It is easily done on iphone by associating the personal appointments with the personal email address and the work ones with the work email address. They both show on the iphone and only the work ones get synced with the work computer. Can I do this with the Nokia?

You can try sharing your iCloud calendar with yourself as explained here: http://help.apple.com/icloud/#mm6b1a8694. If you work phone has an iCloud account, you can privately share your calendar with it, giving your read and write access. If it doesn't, you can publically share it, giving you read-only access. This should give you the ability to view the shared calendar alongside your work calendar without merging the two.

Self-evaluation, Performance Management

Hi,
I need help to solve a problem. I'm implementing the Performance Management module, and the process can be one the following:
- manager appraisal for his employees
- or the employee (appraisee) does his self-evaluation, and after the manager could accept it or not.
If the manager does not accept the evaluation from the appraisee, he creates the final appraisal.
So I configured one form, based in standard appraisal, and when I try to create my self-evaluation, in R3 the form appears, but in portal the appraisal form only appears to the manager, it doesn't appear to the appraisee.
Can anyone help me, please?
Thanks in advance for any help.

hi
check the status flow of the template u have designed.
And also check what all buttons that come in the first page on portal when manager opens the appraisal. In your case the template may be needed to opened first by the manager then save , it will go to the concerned employee , then come back for ratings.
Regards
sameer

Performance Management: 'Share with Main Appraiser' button not visible

Hi Gurus,
I am using Oracle R12.1.3, Performance Management module.
I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
Would really appreciate any response which might help.
Thanks and Regards,
Rahul

I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

How link Appraisal in Performance Management Module and Person

Similar Messages

Maybe you are looking for