How link change rate for CATS document transferred in accounting

Dear expert,
referring to standrad transction CAT7 (transfer of CATS document in wbs accounting), do you know in whick way exchange rate is linked?
Best Regards,
Maria

Hi,
Normally if the current year rates are not maintained then system will take which is the next available. If you are using Newtork Costing then check the costing / valuation variant which is defined for that. In that variant we have an option to choose a different version (if needed). Once you identidfy your version, then in OKEQ you have to check what is the exchange rate type maintained for that version. System will use that exchange rate type with latest available rate.
Regards
Sreekanth

Similar Messages

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

    I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

    You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
    My Apple ID

  • How to change workflow for expired qualification in HR Module

    Hi,
    My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
    I have serached sap help but i am not understand please below mention URL for SAP help
    Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
    Please explain step by step how to trigrred workflow for expired qualification?
    Please this problem is high and try to solve it.
    Thx!
    Sachin

    Hi,
    Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
    But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
    Hope I am clear and this helps and if you need more details, reply.
    venu

  • How to change password for BtOpenZone?

    Hi,
    Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
    http://www.btinternet.com/new/content/mybti
    Last time I have to ring BT to change the password, but I want to do via some control panel.
    Thanks
    Kam 
    Solved!
    Go to Solution.

    If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
    if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

  • How to change tablespace for a table in 10g?

    Does anyone know how to change tablespace for a table (like changing tablespace for an index [alter index ... rebuild tablespace ... ])? Many thanks in advance.

    alter table tablename move tablespace newtsname;
    You need to rebuild the indexes after the move.

  • How to change password for itunes

    HELP PLEASE!
    DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

    Follow the instructions here.
    Apple ID: Changing your password

  • How to change password for sidadm user on HP-UX

    Hello
    How to change password for <sidadm> user on HP-UX

    Hello Jan,
           1.      Log on to the operating system with the <sid>adm user.
           2.      Open a shell.
           3.      Enter the command passwd.
           4.      Enter the old and new passwords
    Rohit

  • How to change password for apple user id

    how to change password for apple user id

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for parental controls

    how to change password for parental control on macbook pro

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for  XELSYSADM user in OIM?

    Hello Gurus and Experts!
    How to change password for XELSYSADM user in OIM?
    Your help is appreciated.

    Follow the undermentioned steps to change the password:
    1) Change the password from oim Design Client as usual.
    2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
    3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
    <Scheduler>
    <XLUserName>xelsysadm</XLUserName>
    <XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
    </Scheduler>
    4) Restart server.
    Now login with the new password.

  • How to change rate in VF03

    Dear experts,
    In VF03, if I double clicking on item (exp in Internal credit memo), then click 'condition' field : condition type, name, rate, etc will be displayed.
    How to change the rate displayed through customizing, exp from 4% to 5%?
    Thank you in advance.

    Hi,
    You can maintain condition record for the condition type in VK11.
    Regards,
    Kiran

  • Business Place change mode for posted documents

    Dear friends,
    I have to make changes of business place/section code field for the posted documents. 
    How is it possible.
    and I am not able to find the FBCJ wht documents in challan updation J1INCHLN. 
    Pl provide your valuable suggestions, which will be rewarded.
    BSR

    Dear Sarma,
    Thank you for your valuable suggestion.  I have tried for updation.  Actually my issue is I have to replace the existing business place with anotherone.
    I think J1INPP is only for updation of Business place/section code for empty documents.  My requirement is for replacement.  Can you see how best we can do.
    BSR

  • How to change GR/GI Slip Document Title

    Hi Experts,
    I would like to ask about how to change the GR/GI Slip document title to another text instead of the "GR/GI slip".
    I enclose the picture as a link below.
    http://img834.imageshack.us/img834/6846/slip.png
    Thanks in advance

    In std its not possible. copy the same smartform and ask your abaper to put your logo in this smartform.
    Hope this will help ful to u

  • How to change port for discoverer server

    Hi All,
    Current default port is 7777 for discoverer server.
    how to change the port number ?
    Thank you.

    [Disco Configuration Guide|http://download.oracle.com/docs/html/B13918_03/maint.htm#i1035783]
    Hi,
    I would recommend using the Oracle Business Intelligence Discoverer Configuration Guide appropriate for your implementation (e.g. for Oracle BI Discoverer 10g Release 2 for SPARC, click on the link above). Here is what the documentation says:
    To change the port on which Discoverer is deployed:
    -Start Oracle Application Server Control and display the System Components page (for more information, see Section 5.1.2, "How to start Application Server Control and display the System Components page").
    Display the Ports tab
    -In the rows containing the Oracle HTTP Server component (Type=Listen), select the edit icon in the Configure column to display the Server Properties page for that component.
    -Scroll down to the Listening Addresses and Ports area and change the port number in the Default Port field.
    -Click OK.
    -When you are prompted to restart the Oracle HTTP Server, click Yes.
    For more information about the Server Properties page in Application Server Control, see Application Server Control Help.
    Hint: If you change a Discoverer port number, make sure that any other OracleAS components that use that Discoverer port number are synchronized.
    I have not needed to do this, so I can not speak from experience. As always, try this in a test environment first.
    Patrick
    Edited by: Patrick Bacon on Dec 8, 2009 5:31 AM

Maybe you are looking for