How login DAC in FMW mode?

Hi,
We have installed DAC 11g server in Linux and DAC client in windows. We are able to login to DAC client using DAC (standalone mode), while trying to login in FMW (web mode) it throws error like can’t authenticate user.After going through documents we came to know that, it authenticates and gets permissions through the DAC Server in the BI domain using the BI domain URL. For this we need to deploy DAC in Weblogic server. We did all the prerequisites and we followed this doc e14849 from oracle.Could anybody help how to deploy DAC in Weblogic server or login in FMW mode?
Thanks in advance,
Vinoth

Vinoth,
Check this
Setup Tasks and Concepts for DAC Administrators
http://docs.oracle.com/cd/E35287_01/fusionapps.7964/e14849.pdf
Do you have any documentation how you have installed DAC server in Linux ? I need the Step how you have done that.
Thanks,

Similar Messages

  • How to remove/prevent developer mode login in SRDemo?

    hi,
    how can we prevent developer mode login in SRDemo since it is security risk?
    How should we do that if we add ADF security to SRDemo?

    hi,
    I was looking at connectedUser info shown in top right corner and since it was not there (I set devMode in userInfo bean to false in order to prevent any login if wrong credentials) I (wrongly) assumed unauthenticated user accessed protected pages.
    In my example I added Welcome and error40x pages to the application based on SRDemo. If the user enters wrong credentials in Login page he is dispatched to error401.jspx page.
    On this page there is a link to index.jspx. By clicking on this link user is presented again with Login page but a message "Invalid username and password" is shown as well, probably caused by previous attempt.
    If the user now enters correct credentials he is presented with Welcome page but currently connectedUser is not shown in top right corner (although user is apparently authenticated by container). It seems that Welcome backing bean which checks the role when user clicks the Start button is not invoked at all and the user stays at the same Welcome page although he is authorized to access the page corresponding to his role.
    In order to get back to normal flow user have to logout first and only then he is presented with clean Login page and after that correct Welcome page showing currently connectedUser.
    So my question is how to get back to "normal login flow" once the user is dispatched to error401.jspx page and he clicks the link to index.jspx or he clicks the Back button on the browser to go back to Login page?
    Many thanks

  • HT3775 how can i convert a mod file (on vlc) to mp4 to work on quicktime

    how can i convert a mod file (on vlc) to mp4 to work on quicktime
    when i connected my video camera and imported the videos, they're default is to play on vlc
    they are mod files
    i want to edit the videos on imovie and for that the videos need to be mp4 and open in quicktime player
    what do i do

    iPhone supports
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    If your video is supported, drag it to iTunes and sync it to your iPhone.

  • HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

    My Computer:  HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates.  Downloaded and installed the following:  Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization.  I have done EVERYTHING Microsoft has advised.
    How do I get XP Mode to work?

    Frank, thanks for the help.  That Microsoft article is the one I read yesterday morning.  I again just now went into the BIOS as follows:  Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled.  So I saved changes and exited.  My computer is running Windows 7 Professional 64-bit.
    This is my system information: 
    OS Name    Microsoft Windows 7 Professional
    Version    6.1.7601 Service Pack 1 Build 7601
    Other OS Description     Not Available
    OS Manufacturer    Microsoft Corporation
    System Name    HPPHOENIX
    System Manufacturer    Hewlett-Packard
    System Model    h9-1100z
    System Type    x64-based PC
    Processor    AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
    BIOS Version/Date    AMI Ang_716, 4/5/2012
    SMBIOS Version    2.7
    Windows Directory    C:\Windows
    System Directory    C:\Windows\system32
    Boot Device    \Device\HarddiskVolume1
    Locale    United States
    Hardware Abstraction Layer    Version = "6.1.7601.17514"
    User Name    HPPHOENIX\Debbie
    Time Zone    Eastern Daylight Time
    Installed Physical Memory (RAM)    12.0 GB
    Total Physical Memory    11.8 GB
    Available Physical Memory    10.2 GB
    Total Virtual Memory    23.6 GB
    Available Virtual Memory    21.7 GB
    Page File Space    11.8 GB
    Page File    C:\pagefile.sys
    I downloaded and installed the Windows XP Mode.  The
    I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
    I applied the "fix" for AMD motherboards.
    I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
    "Windows XP Mode-Windows Virtual PC
    Could not complete Setup.  Please try again."
    The has happened over 7 times.  Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again.  Still the same message.  Any help or advice is certainly needed and appreciated.  Debbie

  • How can I use Safe Mode to troubleshoot in Windows 8 or Windows 7?

    QuestionHow can I use Safe Mode to troubleshoot in Windows 8 or Windows 7?
    AnswerWindows has a special mode known as Safe Mode. It is not fully functional, but it allows you to make changes to the laptop to hopefully fix normal mode. We're going to attempt to boot into Safe Mode to use it fix the laptop.
    For more information on how to boot into Safe Mode please see the following articles:
    How To: Safe Mode and other Advanced Startup Options in Windows 8
    Creating a System Repair Disc for Windows 8 (useful for entering Safe Mode)
    How To: Start your Windows 7 computer in Safe Mode
    Use Safe Mode to undo recent changes
    When a computer won't start Windows, it's usually due to a recent change. If you installed a new piece of software before your laptop began to have trouble booting, you may want to uninstall it. Similarly, if you recently made a change to any system settings, you may want to change it back. If you have antivirus software, you may want to perform a scan. If you're not sure what to do here, feel free to skip to the next step!
    Use Safe Mode to perform a system restore
    Windows includes a utility called System Restore that can help with many problems. While this won't alter or remove any of your personal files, it will roll back your system settings and files to an earlier date. We'll use this to attempt to fix Windows.
    To learn how to use System Restore, please check the following articles:
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    How To: Perform a system restore in Windows 7
    Use Safe Mode to initiate a clean boot
    As Windows loads, it loads many additional components such as services and startup items. Some of these are not vital. For example, some tools start immediately with Windows, such as antivirus software. From Safe Mode, we can instruct Windows not to load many of these. This will help you determine if one is causing Windows not to load properly. Note that this step is more advanced than the previous steps. If it seems difficult for you, you may consider asking for help from someone who is more comfortable with computers.
    Please view the following article for more information:
    How can I perform a clean startup without my startup items to troubleshoot a problem?
    If Windows loads normally, you'll know one of those startup items or services was causing the problem. If this is the case, you may want to return to the System Configuration Utility and re-enable some items and services to determine which specific one caused the problem.
    Backing up your data
    If you're able to enter Safe Mode, backing up your data should be easy. Connect a USB flash drive or external drive to your computer while in Safe Mode and then copy your important  files to the flash drive or external drive.
    You may also want to consider taking your computer to a professional.

    Would love to know if this is possible. Found forums dating back years asking exactly the same thing, no solutions. And I do not want to change my headset (Sennheiser MM-50), or use the onboard mic (which sounds like you are using your Mac in a wind tunnel once the fans kick in).

  • How to enable single window mode?

    *how to enable single window mode in the latest version of Safari?*
    browser opens up some links in new windows and it is very inconvenient
    Message was edited by: wolfxr

    All that you describe is the standard setting them I have long found, but they do not bring any results. What is interesting - parameter "TargetedClicksCreateTabs" in a state of "true" which is processed in the Mac version, broken in the Windows-based version if it is to register the file C: \ Program Files \ Safari \ Safari.resources \ Defaults.plist a file stored in the folder C: \ Documents and Settings \ Admin \ Application Data \ Apple Computer \ Preferences \ com.apple.Safari.plist scrambled to change it theoretically impossible, but if you replace it with THIS file, then it can be set, but the parameter "TargetedClicksCreateTabs" still not working

  • How to eneter into editing mode on ListView ?

    Hello everyone
    ListView has setEditable() method and several editing-related properties onEditCancelProperty(), onEditCommitProperty() and onEditStartProperty() .
    How to eneter into editing mode on ListView ?
    What operation is needed ?
    Best regards.

    Hi,
    I just posted a question related to editing in this thread today. It has some source code that may help you:
    ListView.edit(index i) invokes canceEdit
    --Toni                                                                                                                                                                                                                                                                                                                                                                                                               

  • MSI R9 290 How to switch between Gaming Modes?

    Hi, I just got a MSI R9 290... with Afterburner installed. This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes? I just tried to up the MHz in Afterburner and must have done something wrong, becuase I froze everything instalntly and had to reboot. Can someone please advise me how to switch between these modes? Do I have the right software installed, Afterburner or is there another suite specificly for this card? I did not install the card, and sorry I am a noob when it comes to OC. . . Noob to gaming in general, but I am getting some pretty bogus 30FPS on a 2012 game, LA Noire, which shouldnt even be demanding for t

    Quote from: kris.meaney on 07-March-15, 18:45:04
    This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes?
    You need the Gaming APP for switching (not Afterburner): http://download.msi.com/uti_exe/gamingApp.zip
    Afterburner is for manual overclocking (for advanced users) if not using the modes.

  • TS1538 how to turn off compatibility mode so my itunes can play..... wont play on windows 8

    i have an i phone   i downloaded music on my home pc which is vista  but can not play on windows 8 on my office pc      its says turn off compatibility mode how do i do that?

    Refer to this article:
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/TS1489

  • How to enter full screen mode in email?

    Can we enter full screen mode when reading an email in landscape mode? I can see safari has already provide this feature. It is really useful for reading  wide pages using iPhone 5 with a longer screen. But I don't know how to use this feature for email. In landscape mode, there are 2 email menus plus the system bar, which occupy too many screen. Any idea on how to enter full screen mode?
    Thanks.

    Ok, hope this will be added in the next release.

  • How can i enable retina mode in new PS 13.1

    Hello guys!
    I have macbook pro retina 15. And i update my photoshop to 13.1 But when i open document in 100% zoom all so little and in 200% all so blurry. How i can enable retina mode in new photoshop or i want to draw all layouts x2? Thank you!

    And now i will create templates with x2 resolution (x2 zoom will in none retina displays) and for another people (who will write html code after my template) templates will be very big and uncomfortably for use.
    And another problem is support my current projects, wich i strat on non retina display, know i can draw on 100% zoom and so small or on 200% zoom and so blur )
    Please say man, this is big problems?) I thought that adobe will create non-retina emulation in this version...

  • TS1489 Using Windows 7 but there is no Compatibility Tab in Properties. Any idea how to turn off this mode please.

    I am using Windows 7 but when I go into iTunes -  then Properties, I cannot find a Compatibilty Tab.  Any idea how to turn off this mode please?

    I am using Windows 7 but when I go into iTunes -  then Properties, I cannot find a Compatibilty Tab.  Any idea how to turn off this mode please?

  • How can i set print mode at run time in smartforms???

    Hi expert,
    In smartforms how can I  set print mode at run time.
    I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
    If it is possible then plz give me answer asap.

    Hi,
    Set These settings
    While calling smartform, paas control_parameters and output_options as mentioned below and set
    user_settings = ' '.
    It will send the smartform output to spool.
    DATA: wa_output_options TYPE ssfcompop,
    wa_ctrl TYPE ssfctrlop.
    wa_output_options-tdimmed = 'X'.
    wa_output_options-tddelete = 'X'.
    wa_output_options-tdimmed = ' '.
    wa_output_options-tddest = 'LOCL'.
    wa_ctrl-no_dialog = 'X'.
    CALL FUNCTION lv_fm_name
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    control_parameters = wa_ctrl
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    output_options = wa_output_options
    user_settings = ' '
    x_adrp = x_adrp
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    JOB_OUTPUT_INFO =
    JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Kumar(Reward if helpful).

  • How to set the classloader mode in Netweaver 04s

    Hi All,
    Can anybody tell me how to set classloader mode in Netweaver 04S?
    In websphere , there is direct option you when you select the project through admin console. But I am able to find the place in the netweaver where I can set such mode.
    classloader mode such as parentfirst, parent last etc
    I want to set the mode parent last.
    This is very urgent requirenment.So please let me know if anybody is having any input on this.
    Thanks,
    Chandan

    Hi Siddhesh,
    Thanks for replying.
    Actually,NW has its own version of jaxrpc related jar files (in  <drive>:\usr\sap\J2E\JC02\j2ee\cluster\server0\bin\ext\webservices_lib folder) which are of a older version and are being picked up instead of the jars that are present in my application package. As a result, there are exceptions like:
    #1.5#0018FE710E98005B000000000000182800044D0B9F1ED11B#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###java.lang.NoSuchMethodError: javax.xml.namespace.QName.getPrefix()Ljava/lang/String;#
    #1.5#0018FE710E98005B000000010000182800044D0B9F1ED31A#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.BackslashUtil.getQNameWithDifferentLocal(BackslashUtil.java:62)#
    #1.5#0018FE710E98005B000000020000182800044D0B9F1ED379#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.BackslashUtil.getQNameWithBackslashlessLocal(BackslashUtil.java:39)#
    #1.5#0018FE710E98005B000000030000182800044D0B9F1ED3D3#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.SymbolTable.populateServices(SymbolTable.java:3078)#
    #1.5#0018FE710E98005B000000040000182800044D0B9F1ED42B#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:745)#
    #1.5#0018FE710E98005B000000050000182800044D0B9F1ED481#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:543)#
    #1.5#0018FE710E98005B000000060000182800044D0B9F1ED4D8#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:518)#
    #1.5#0018FE710E98005B000000070000182800044D0B9F1ED52F#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:495)#
    #1.5#0018FE710E98005B000000080000182800044D0B9F1ED585#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:361)#
    #1.5#0018FE710E98005B000000090000182800044D0B9F1ED5E1#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###       at java.lang.Thread.run(Thread.java:534)#
    #1.5#0018FE710E98004F00001A610000182800044D0B9F1F2B60#1210612216475#System.out#tdemand.com/TrueDemandWeb#System.out#Guest#0#####SAPEngine_Application_Thread[impl:3]_9##0#0#Info##Plain###2008-05-12 10:10:16,459 ERROR [com.tdemand.common.service.client.ServiceProxyUtil] - <Error processing WSDL document: 
    javax.xml.rpc.ServiceException: Error processing WSDL document: 
    javax.xml.rpc.ServiceException: Cannot find service:  BootstrapService>
    javax.xml.rpc.ServiceException: Error processing WSDL document: 
    javax.xml.rpc.ServiceException: Error processing WSDL document: 
    javax.xml.rpc.ServiceException: Cannot find service:  BootstrapService
                at org.apache.axis.client.Service.initService(Service.java:250)
                at org.apache.axis.client.Service.<init>(Service.java:165)
                at org.apache.axis.client.ServiceFactory.createService(ServiceFactory.java:198)
                at org.springframework.remoting.jaxrpc.LocalJaxRpcServiceFactory.createJaxRpcService(LocalJaxRpcServiceFactory.java:182)
    This problem is solved in websphere as probably because we have classloader configuration set through Admin console.
    But just wanted to know does we have such option in NetWeaver? If yes, how to set the classloader mode to parent last.
    Or if you know some other solution then let me know.
    Thanks,
    Chandan

  • How can we send read mode for a query..?

    How can we send read mode for a query..?
    thanks in advance
    regards

    Hi Chaudhary.
    I am not sure I understand your question correct?
    Do you want to set a query to read only so it can not be changed? If so you should be controlling this with authorizations.
    Hope it helps.
    BR
    Stefan

Maybe you are looking for