How long does a session variable live?

I have a logon servlet that sets a session variable (validated) and then I reference that variable from various JSP pages. Does the timeout timer start when I last hit the logon servlet or should the session remain persistent as long as the browser is active up until the engine timeout is reached for the zone? I'm using Apache 1.3 with JServ (Oracle 9iAS R2) so unfortunately setMaxInactiveInterval does not work.

There are timeout settings that can be set, check web.xml documentation for this and this can also be set in the App Server(at least for WAS). You also have to be concerned about how much memeory too and I know WAS has settings concerning session timeouts and memory.
HTH,
J.Clancey

Similar Messages

  • How long does iTunes Password remain valid after iTouch purchase?

    Its great to be able to buy songs thru the iTouch.
    But how long does the session / password last after the first purchase?
    Is there a way to log out? Or does the login automatically expire after a period of time(like some websites such as Facebook) ?

    From the manual:
    Your purchase is charged to your iTunes Store account. For additional purchases made
    within the next fifteen minutes, you don’t have to enter your password again.

  • "How long does it take to do a dist-upgrade on your distro?"

    Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
    This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
    The Computer
    Dell OptiPlex GX110
    [jada@arch-02 ~]$ cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 8
    model name : Pentium III (Coppermine)
    stepping : 6
    cpu MHz : 797.452
    cache size : 256 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
    bogomips : 1596.45
    clflush size : 32
    [jada@arch-02 ~]$
    I used the following command for the update
    $ time pacman -Syu
    The Test
    first update pacman
    [root@arch-02 jada]# pacman -Syu
    warning: current locale is invalid; using default "C" locale
    :: Synchronizing package databases...
    core 23.8K 80.0K/s 00:00:00 [#####################] 100%
    extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
    community 341.0K 295.8K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    :: pacman has detected a newer version of the "pacman" package.
    :: It is recommended that you allow pacman to upgrade itself
    :: first, then you can re-run the operation with the newer version.
    :: Upgrade pacman first? [Y/n] y
    resolving dependencies... done.
    looking for inter-conflicts... done.
    Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
    Total Package Size: 1.19 MB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
    libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
    pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
    checking package integrity... done.
    cleaning up... done.
    (3/3) checking for file conflicts [#####################] 100%
    (1/3) upgrading libarchive [#####################] 100%
    (2/3) upgrading libdownload [#####################] 100%
    (3/3) upgrading pacman [#####################] 100%
    >>> The makepkg.conf syntax has changed, please note the new format
    >>> when merging the pacnew file with your old configuration.
    >>>
    >>> The pacman.conf default file has changed. Please update your
    >>> config to use the single mirrorlist, and any additional files
    >>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
    >>>
    >>> The location of sync DBs has moved from /var/lib/pacman/ to
    >>> /var/lib/pacman/sync/ for several reasons. To delete older
    >>> DBs, please run pacman -Sc and follow the instructions.
    >>> You will also have to run pacman -Sy to refresh the sync DBs.
    >>>
    >>> abs is no longer included; please install the 'abs' package
    >>> to use abs. You may need to edit abs.conf to re-enable repos.
    [root@arch-02 jada]#
    restart pacman 3.1.1 and update the packages
    [root@arch-02 jada]# time pacman -Syu
    :: Synchronizing package databases...
    core 23.8K 80.3K/s 00:00:00 [#####################] 100%
    extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
    community 341.0K 302.5K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    resolving dependencies...
    warning: dependency cycle detected:
    warning: bash will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: readline will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: ncurses will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: db will be installed before its coreutils dependency
    looking for inter-conflicts...
    Remove: mktemp mpg321
    Total Removed Size: 0.08 MB
    Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
    kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
    acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
    pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
    mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
    cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
    libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
    pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
    binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
    glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
    dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
    e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
    openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
    kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
    diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
    perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
    bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
    bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
    bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
    cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
    device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
    csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
    dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
    docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
    enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
    libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
    epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
    gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
    smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
    poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
    libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
    faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
    file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
    firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
    font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
    font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
    glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
    fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
    gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
    libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
    pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
    gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
    glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
    gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
    gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
    gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
    gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
    nautilus-2.20.0-4 gnome-control-center-2.20.3-1
    gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
    gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
    tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
    gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
    gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
    gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
    grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
    gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
    gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
    vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
    hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
    hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
    imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
    iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
    jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
    lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
    qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
    poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
    libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
    klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
    mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
    less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
    libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
    libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
    libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
    libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
    logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
    make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
    mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
    nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
    netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
    nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
    openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
    patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
    pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
    vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
    postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
    procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
    qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
    rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
    seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
    sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
    sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
    tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
    totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
    udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
    vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
    wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
    xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
    xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
    xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
    xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
    xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
    wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
    xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
    xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
    zenity-2.20.1-1
    Total Download Size: 743.90 MB
    Total Installed Size: 748.87 MB
    Proceed with installation? [Y/n]
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
    readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
    bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
    kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
    tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
    xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
    xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
    xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
    yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
    zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
    :: Retrieving packages from community...
    freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
    gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
    xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
    checking package integrity...
    (349/349) checking for file conflicts [#####################] 100%
    ( 1/349) upgrading ncurses [#####################] 100%
    ( 2/349) upgrading readline [#####################] 100%
    ( 3/349) upgrading bash [#####################] 100%
    ( 4/349) upgrading kernel-headers [#####################] 100%
    ( 5/349) upgrading tzdata [#####################] 100%
    ( 6/349) upgrading glibc [#####################] 100%
    (340/349) installing wavpack [#####################] 100%
    (341/349) upgrading xine-lib [#####################] 100%
    (342/349) upgrading xinetd [#####################] 100%
    (343/349) upgrading xkeyboard-config [#####################] 100%
    (344/349) upgrading xmms [#####################] 100%
    (345/349) upgrading xorg-server [#####################] 100%
    :: Could not detect nvidia-utils on system
    :: Will attempt to use built-in libwfb
    (346/349) upgrading xorg-xinit [#####################] 100%
    (347/349) upgrading xscreensaver [#####################] 100%
    (348/349) upgrading yelp [#####################] 100%
    (349/349) upgrading zenity [#####################] 100%
    real 56m46.062s
    user 4m25.013s
    sys 1m46.520s
    [root@arch-02 jada]#
    And for your tread question.
    How long does it take to do a dist-upgrade on your distro?
    one hour
    real    56m46.062s
    user    4m25.013s
    sys     1m46.520s
    After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
    Archlinux rocks

    JaDa wrote:Archlinux rocks
    definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
    root@moe:~ # apt-get upgrade
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these.
    The following packages have unmet dependencies.
    E: Unmet dependencies. Try using -f.
    root@moe:~ # apt-get -f install
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Correcting dependencies...Done
    The following extra packages will be installed:
    exim4-base exim4-daemon-light
    Suggested packages:
    exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
    The following packages will be upgraded:
    exim4-base exim4-daemon-light
    2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
    1 not fully installed or removed.
    Need to get 0B/1391kB of archives.
    After unpacking 8192B of additional disk space will be used.
    Do you want to continue [Y/n]?
    Preconfiguring packages ...
    dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
    exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
    Package exim4-daemon-light is to be removed.
    Package exim4-daemon-heavy is not installed.
    Package exim4-daemon-custom is not installed.
    dpkg: error processing exim4-daemon-light (--remove):
    Package is in a very bad inconsistent state - you should
    reinstall it before attempting a removal.
    Errors were encountered while processing:
    exim4-daemon-light
    [ Rootkit Hunter version 1.3.0 ]
    File updated: searched for 152 files, found 131
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    root@moe:~ # apt-get install exim4-daemon-light
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these:
    The following packages have unmet dependencies.
    exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
    E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
    root@moe:~ #
    It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

  • What is the average duration of 1 full SAP life cycle or 1 end-to-end implementation. How long does it take to prepare DEV, QAS and PRD?

    What is the average duration of 1 full SAP life cycle or 1 end-to-end implementation. How long does it take to prepare DEV, QAS and PRD in any company?

    Anand,
    let me start with saying that the question you ask may not help you to determine the duration of your project. As Ryan and others stated the duration of the project is highly dependent on the scope of the solution you are implementing, geographical scope, amount of modifications/enhancements, number of languages, number of users that need to be trained, amount of standard processes customer is able to re-use in the implementation and many other factors (like quality of implementation contractor you will chose and availability of customer and implementors resources). I can probably go on for another couple lines, but I guess you get the idea.
    With that out of the way let's talk about some example implementations that will give you an idea - Ryan did great job outlining what I would call traditional approach above. I have couple examples where customers leveraged innovative deployment strategies that are available today. In particular the project teams leveraged pre-packaged services like RDS, World Template or Best Practices as their baseline solution and they built from there. Second acceleration technique customers now leverage is the deployment in the SAP HANA Enterprise Cloud to accelerate the time to initial setup of the system and thus move from traditional blueprinting to scope validation exercise that further shortens the time. There are other acceleration techniques we see applied in some cases like use of iterative implementation of the delta requirements on top of the baseline solution.
    Let me offer few examples to illustrate what I explained above:
    ERP implementation at Schaidt Innovations with 3 months long deployment of ERP solution using ERP RDS as a baseline (you can view their testimonial here - Schaidt Innovations: SAP ERP on HANA in the cloud - YouTube)
    Customer in Asia with global template deployment that leveraged SAP ERP for Manufacturing with deployment to cloud and 9 countries rollout (Japan, Korea, China, Taiwan, Hong Kong, UK, Germany and US). The initial deployment took 4 months for first country and 2 months for rollout into the additional 8 countries - so total of 6 months. The original plan using traditional approach with full blueprint and heavy configuration was estimated to be more than double of the actual deployment time.
    There are many other examples where customers follow the assemble-to-order delivery model for their project and gain significant benefits doing so. I suggest you to review some of the recordings we did in 2013 about this approach and if you are member of ASUG review the Agile ASAP sessions we did for ASUG PM SIG.
    Link to webinars: SAP A2O Webinar Series Schedule
    Let me know if you have any questions.
    Jan

  • How long does iweb take to upload to idisk re 11 page site, please

    how long does iweb take to upload to idisk re 11 page site, please

    How long is a piece of string? There are so many variables it is impossible to say for sure, how many graphics, videos, what broadband speed you have all have to be taken into account. Why don't you try it and tell us the answer.

  • How long does it take to implement HR Mini Master

    I realize there are many variables, but typically how long does it take to configure HR Mini master (3 weeks, 3 months, 6 months, etc...)? We would like to upload from Peoplesoft and continually have it updated.
    best regards,

    Hi,
    If you have all information/data available from client, then configuring Enterprise structure, Personnel Structure, Actions, Infotypes, time related setting and integration of other modules will take atleast two weeks, but after that testing along with other modules takes time to test complete cycle.  So there is no fix time we can give to client but minimum three weeks.
    All the best,
    Santosh

  • Sick of interleaving - how long does DLM take

    Have had problems with a dishwasher tripping our electric over the past month and this has of course caused DLM to kick in any put interleave on line and limit my IP profile to always be below 60 mb.  My data rate is currently 57957 and hasn't increased for the past month steadily dropping from the 60mb ip cap last month when power cuts happened.  
    Before my connection was working great and my data rate was a lot closer to the Max data rate, currently it is at 57957, Max at 65760.  The Max data rate has been as high as 69000, still no increase in IP data rate. 
    The main thing though is interleaveing, I know that this is controlled by DLm and cannot be turned of directly, but as my IP profile seems to be stuck and steadily decreasing on every connection restart (which the hh5 seems to do on a whim sometimes)
    My line stats seem to be ok SNR 6.0\6.0
    Line attenuation 18.2
    Please can my IP profile be reset to remove my IP cap which would hopefully put me back on fastpath which I had been on for months and months till the power cuts

    same as mine https://community.bt.com/t5/BT-Infinity-Speed-Connection/Poor-Service-from-BT-adamant-about-problem/...
    Please can a mod look at my connection just reset the IP profile please, there are no faults on my line!!!!!!!!!
    Re: Poor Service from BT, adamant about problem!
    Options 
    on ‎28-07-2014 1h09
    I feel this is the exact problem I've been having posted on here titled sick of interleaving - how long till DLM turns it off.
    Could you check if your 1st hop is around 12 ms (click start, run, cmd, enter, tracert www.BBC.co.uk) my guess would be interleaving has been put on your line too.
    If your router resets too many times (mine due to faulty dishwasher tripping electric)
    Once this is on it seems to take ages to reset back to normal.  Like you I have the hh5 and this will sometimes do a random disconnect (firmware bug or BT messing with connection?) I always see in my event log a cwmp login from bt which will then reboot the router.   
    Like you my attenuation is very short (18.2)  SNR At 6.2 but it seems because my hh5 sometimes just reboots connection ( usually around 2.20am going from event logs) that interleaving will never come off.  I have read that it takes 2 weeks constant connection for speeds to return to normal and interleaving to be turned off.
    Not happy about my connection for last month, after being very happy for months and months.  As soon as DLM has kicked can feel difference especially in pings more than raw speed for me.
    Will run down my contract and jump ship as soon as contract runs out if mine doesn't improve.
    Message 19 of 20 (7 Views)
     Posted from my mobile
    Add Tag...
    Quick ReplyReply
    smoke999
    Visitor
    Posts: 4
    Registered: ‎26-07-2014
    0
    Re: Poor Service from BT, adamant about problem!
    Options 
    on ‎28-07-2014 1h17
    https://community.bt.com/t5/BT-Infinity-Speed-Connection/sick-of-interleaving-how-long-does-DLM-take...
    Is this the BT backdoor to manange connection?  
    (172830.560000) CWMP: session completed successfully
    22:05:05, 27 Jul.
    (172830.320000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    22:05:01, 27 Jul.
    (172826.800000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    22:05:01, 27 Jul.
    (172826.790000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
    22:05:01, 27 Jul.
    (172826.590000) CWMP: Initializing transaction for event code 2 PERIODIC

  • How long does it typically take to get a solution?

    When using the disscusion board, how long does it take to get a solution?  Also, is this service adequate to cover most inquiries?  How does it work when you need support at 2 AM on Saturday?

    Well, there are no guarantees.
    If you look at the names, there are regular guys and blue guys, the blue guys are NI people. Regular guys such as me are just volunteers trying to help out because it is fun. There are many contributors with 10+ years of LabVIEW programming experience, so the collective knowledge and intelligence of this board is quite high and it is very likely that you'll get an excellent answer pretty fast. Participants are from all over the world, so even at your 2am it will be a more reasonable time somewhere else.
    Next to the name are some yellow (or blue)  bars that indicate seniority based on the number of posts, ratings received, etc, so if there are multiple answers pick the one from a more trusted source.
    As in real life, the quality of the answer is strongly dependent on the quality of the question. Start with a captivating title related to the core of the question and not something generic such as "please help", labview question", or similar. Explain your problem as detailed as possible, what you are trying to do, what results you expect, what errors you see, etc., not just "it does not work". Many times it is easiest to attach a simplified version of your program. Make sure to put some annotations on the diagram pointing out the problem you see. Put some reasonable default values in the controls so we can run it with real data.
    So, just go ahead and ask, it's free!
    Of course there are also premium support options if you want more traditional support with case numbers and live telepone help. Contact your NI rep for details.
    LabVIEW Champion . Do more with less code and in less time .

  • How long does the install take?

    How long does the Maverick install take?

    The length of a piece of string.
    There are too many variables for anyone to ask the question. How good is your broadband? How busy is the server you're downloading from? What processor on your Mac? How full is the HD? How much Ram do you have?
    Set aside a couple of hours.

  • How long does it usually take for self-insta​ll kit to ship?

    How long does it usually take for the HSI self-install kit to ship to someone's house? I live in NJ.

    Contact Apple and ask them.
    These are user to user technical support forums.  No one here speaks for Apple.

  • How long does it on average to download OS Lion?

    How long does it on average to download OS Lion?

    Impossible to say - you must know that downloading speed is almost infinitely variable depending on your ISP, contract, and connection quality. 

  • How long does fixing an iPhone 5 take?

    I had to send in my iPhone 5 to Apple (I live nowhere near an Apple Store), to get the Sleep/Wake button repaired. I recieved the box and sent it out Thursday the 8th, they said they recieved it Friday the 9th. It is now Sunday the11th and the Support websight says its still being diagnosed. How long does this take if they are only supposed to be fixing the button?

    KiwiV wrote:
    My problem is that, theyve already had it for 3 days. I called on Friday and they still havnt even started on the repair yet.
    If they received it on the 9th, 4-6 busines days would put it between this coming Thursday and next Monday to be completed.

  • How Long does it take to download Mountain Lion?  Anybody have a good guess?

    How long does it take to download Mountain Lion?  I know there are variables regarding DSL but should it take an hour?  two hours.  Ball Park please?!

    Wish I had your DSL speed.  iTunes suggests I have about 7 1/2 hours still to go!  Just glad it is giving it it's best shot.
    Thanks for your reply.

  • MBP in Battery mode...How long does it last?

    Hi Guys,
    I ve got MBP 2.0 w2GB RAM.
    How long does the battery last if i am only doing surfing?
    I was running an audio application called Ableton Live (which is similar to Garage but much much better) and it only last for 32 minutes.
    I ve got Bootcamp, the other day I was running on XP and complained about the not having enough power . I only unlplugged the AC for 15 mins.
    I double check the battery's serial against Apple's battery re-call program but serial is ok so it is not in re-call list.
    thanks.
    M

    You should calibrate your battery: wait until the sign indicating "low battery" appears, then wait at least 5 hours (computer "sleeping") and finally charge the battery without interruptions until the battery is fully charged. During the charge, you can use your computer.
    This procedure has to be done every month.
    See under About this Mac (Apple menu), "more info", "power" (I think). There, you will see the actual maximum capacity of your battery. The value for a new battery is nearly 5500 mAh but can be a little higher.
    Don't forget to turn Bluetooth off and to lower the luminosity of the screen.

  • How long does it take to create a recovery disc?

    Hi!!!
    I have just bought a Toshiba Portege T110.
    I tried the first time round and cancelled at disc 4 bec i was out of writeable disc.
    Today i am on my 2nd try.  I have mgt disc 1-3.  When at disc 4~~it says is creating Windon Recovery Environment (64bit) and recording.  But the progress bar has been hanging there for the abt 1-2hrs and still not done yet~~
    I tried to cancel the program, but it says is recording and advise me not to cancel as it will take a long time.
    Can some kind soul advise if this is normal?  How long does it takes?  If not, what could be the problem?
    Thank you in advance!!!

    Hi all~~
    i have the answer to my question alrdy~~
    i accidentatly canceled the copying after waiting over 2 hr on disc 4~~
    I restarted the process this morning~~~as i have alrdy done disc 1-3~~i am able to start at disc 4 straight away!!!
    Disc 4 took less then 10 mins to complete. 
    So guys~~ the whole process from disc 1 to 4 takes less than 1 hr.
    All the best to you guys!!
    And Merry Christmas!!

Maybe you are looking for

  • GE60 Apache Pro-003 mutes mic when S key pressed. Need recovery help...

    I don't actually believe that this is an issue with hardware as I have tried external keyboards and my friend pressed S using teamviewer and it still muted me.  I think the issue originated when I decided to install Ubuntu in front of the windows mai

  • Can you use 2 different i pods on the same i tunes program

    I have 2 ipods and I want to use the same itunes program on my laptop.  Podcasts and audio books on  1 and music etc on the other.

  • HDV Print to Video, My Settings

    I've seen several posts here about problems getting Print To Video to work with HDV. I just did this and the results were great. So, at the risk of being redundant, I'm going to post what I did. Camera: Sony FX1, captured using the camera over Firewi

  • How to debug a smartform in WEBUI

    Hi, I need to make a change in the smartform being displayed in WEBUI. I found the smartform and the code where I need to make the chnage. However in order to see the values during run time, I need to debug it. Can I place a session breakpoint in a s

  • Interactive report using Infoset quiereis with SQ01,SQ02,SQ03.

    Hi,          I have to create a report by using the infoset query with SQ01,SQ02 and  SQ03 Tcodes. But problem my requerment is that I have to create one interactive report with these quereis. Can any body tell me how to create this interactive repor