How long does it take photos to re-download after resetting the phone?

  Please help. ):

Please help what?
What is your issue?
The number of pics would determine the time.  Also, re-download from where? To where?

Similar Messages

  • So how long does it take to load a 160GB iPod using the Convert Higher ...

    I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
    http://www.samsoft.org.uk/iTunes/grouping.asp
    The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
    Finally the point of the post...
    *So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
    *I would like to hear the experiences of others.*
    Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.

    With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
    I know I would rethink my purchase but would most likely end up buying the Micro anyway

  • How long does it take mountain lion to download?

    How long does it take mountain lion to download?

    Forever! Wait about half an hour, if there's no progress in the download bar, you can restart to jostle it. It should pick up the DL from where it left off.

  • How long does apple take to send a motherboard? (From the Us to Europe)

    My new 17'' macbook pro had a problem with its motherboard so apple will send me a new one. Does anyone know how long it will take to arrive at my house?
    Cheers,
    Robert

    In fact, Apple doesn't sell parts directly to end users at all. New Apple parts can only be bought by Apple authorized service providers and Apple's own service technicians. From whom did you order this board?

  • How long does it take for cc to download to desktop?

    Hi everyone  - I just signed up for CC and can't seem to download the desktop version. The installer is just hanging forever on my desktop. Does anyone know how long it should take to install?

    Hi Goonerang,
    You can try adjusting the location of your temporary directory.  This will be a system configuration issue though and not adjustable through the Adobe Download Assistant itself.
    Many factors, such as the connection type and network traffic, affect download speed. See Troubleshoot download problems
    Let me know if it helps.
    Thanks!
    Eshant

  • HT1338 How long does it take Mountain Lion to download?

    I purchased the upgrade about 4 hours ago and it has been supposedly "downloading" since then with no cues or prompts.  How long will this take and when should I expect to have to do something to help it along?  Thanks very much.

    Go to sleep. When you get up in the morning it will be waiting for you to install.
    Tip: Before you install quit out of the installer, then go to /Applications/ "Install OS X.app" and copy the installer off to some other media, a pocket drive, another hard drive. Then double-click the "Install OS X.app" to do the install. This is because after it's installed the installer self-destructs. So, if you have another Mac you want to install on, or for safe keeping in case you ever need it again, save it.

  • How long does it take to get a credit back for a phone return?

    as the subject states i just sent a phone back and was wondering how long it will take to get my refund.

    I've been waiting for two months, after being scammed into the EDGE program.    At least they told me the phones were accepted in the warehouse 2 months ago, but I've been lied to so much, I won't feel better until I see the return credit(s) for all 4 phones on my account.   I am not happy with VZ at all.  We've been loyal for about 8 years.    SPRINT is talking loud and strong about covering any buyout fees.

  • How long does it take for an ipad 32GB to reset to factory values?

    Resetting my iPad through iTunes to a factory reset. How long should it take. Ipad has a black screen right now like it is turned off.
    Please help.

    Hi cjantley,
    If you are having issues restoring your iPad, you may find the following articles helpful:
    Apple Support: Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • HT4863 How long does a block on sending messages last after exceeding the daily limit ?

    I exceeded the limit while restoring my Mac and re-instantiating all my email Filters.
    This is a bit of a surprise but, hey, lesson learned.
    My question is, how long does this block last for ?  Is it lifted automatically after
    24 hours or do I need to contact someone at Apple ?
    Thanks !

    iCloud Camera Roll Backup Size:
    Settings > iCloud > Storage & Backup > Manage Storage > (name) iPhone 5S > under Backup Options Camera Roll is 1.7gb
    (sorry, I rounded to 2gb for simplicity earlier)
    iPhone Camera Roll Backup Size:
    Settings > General > Usage > under Storage > Photos & Camera > under Photos & Camera the Camera Roll is 835 kb
    (essentially 0 kb, and there are 0 photo/vid under Camera Roll in Photos app)

  • How long does it take to upload new BlackBerry software onto your phone?

    I just got my new blackberr curve 9300 because my first one broke only one year into my contract, and the software that came on the phone was an older version - so the phone itself prompted me to download the new software to the phone. While I was doing this, my internet went out for a split second and now the progress bar hasn't moved at all so I'm scared I messed it up and my phone isn't usable.
    Basically, should it say that it has been "UPLOADING RAM IMAGE" for half an hour or more? Is this usually a long process?

    Hello MorganDobro
    Welcome to the Community
    If its still in the uploading RAM image stage, that means its still safe to unplug it and go back from the beginning.
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • HT1688 How long does it take for an iphone to master reset?

    I performed a reset this morning to clear my phone of all data and info. Its been four hours and my phone continues to show a black screen and in the middle there is a wheen spinning. Im just curious as to if I have totally messed my phone up or if it just takes a very long time to wipe it.  Thank You!

    If  a device restart/reset doesn't work
    http://support.apple.com/kb/HT1430
    I'd try recovery /restore
    http://support.apple.com/kb/ht1808
    or dfu mode
    DFU Mode
    DFU mode[1] is a state that you can put your iPhone into where it can interface with iTunes but does not load the iPhone operating system or boot loader (this is what really differs DFU mode from recovery mode). DFU stands for Device Firmware Update.
    While connected to PC, running iTunes, hold down Home and Power( button on upper right edge) button for exactly 8 seconds. 
    Release the power button.  Restore message will appear in iTunes.  The device will be recognized by iTunes, but no display will appear on the device itself.  The lack of a display on the device will verify that it is in dfu mode. 
    [1] http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
    I think once you can get it out of the "spinning wheel" mode, you will be OK.  My experience has also been great with visits to the Genius bar.  If you live close to one they are really helpful. 

  • Re: How long does it take for vdbench to stop after data validation error?

    Hi,
    I'm a newbe to this community - so please excuse me if I've made some mistake during this request.
    I'm replying here as opening a new thread was not possible for me.
    This is  DI related issue also (If you can separate it later - that is preferred).
    I'm setting data_error=1000000 or any other very large number to have a continues testing for long time.
    The scenario I'm experiencing is the following:
    - Initially I get an I/O error from the storage device
    - After a few more io's I'm getting DI errors.
    The DI errors were checked by R&D and the reply and explanation were the following:
    The guy showed an I/O going into the disk and receiving an IO error.
    Later on the vdbench is trying to READ the same i/o that got the IO error as if it was actually written to the disk (which did not happen), thus receiving DI error.
    Is this a bug in vdbench or expected behavior? and how can I avoid this scenario / running long test that do not stop upon single DI failure or ignore IO error?
    Hi,
    Thanks,
    Lior./

    Vdbench50401. I won't have system access for the next week so I am only 99% sure, but one of the later versions before 50402 indeed had a case where a failed write was later on re-read and an invalid corruption therefore was reported. 50402 definitely fixes that.
    Note though, that the write error never should have happened in the first place so that in itself to me already is a data corruption.
    Henk.

  • How long does it take for a line to be reset?

    I had an enginee visit yesterday morning and he had checked my connection and requested for my line to be reset. My hub has still not recieved a reset. I understand it takes 48 hours to stabelise but my line needs to be reset 1st which mine is still sitting on the same profile. How can I can get more information on what is going on and why the delay/? 

    He did as I live so close to the exchange less than 300 meters I am connected straight to the exchange rather than a cabinet so there was no reson for my connection to be under performing. He turned off all unessercery socets and set me up with a master socket and run tests and said that I he was going to request a reset my line. And make note to keep Fast on.   
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068340+NQ33025488
    3. Firmware version:
    Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 04/05/14
    4. Board version:
    BT Hub 4A
    5. ADSL uptime:
    1 days, 01:06:16
    6. Bandwidth:
    448 / 8128
    7. Data sent/received:
    178.0 MB / 1.3 GB
    8. Broadband username:
    [email protected]
    9. BT FON:
    Yes
    10. 2.4 GHz Wireless network/SSID:
    BTHub4-ZN23
    11. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS disabled
    12. 2.4 GHz Wireless security:
    WPA and WPA2
    13. 2.4 GHz Wireless channel:
    6
    14. 5 GHz Wireless network/SSID:
    BTHub4-5GHZ
    15. 5 GHz Wireless connections:
    Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS disabled
    16. 5 GHz Wireless security:
    WPA2
    17. 5 GHz Wireless channel:
    36
    18. Firewall:
    Default
    19. MAC Address:
    cc:33:bb:ac:ae:ec
    20. VPI/VCI:
    0 / 38
    21. Modulation:
    G.992.1 Annex A
    22. Latency type:
    Fast
    23. Software variant:
    24. Boot loader:

  • How long does it take to update icloud settings after upgrading to iOS7?

    Since I have updated my ipad2 to iOS7 it has been at the "Updating iCloud settings". 3 hours have elapsed now without any indication on progress being made. Also if I do not touch my ipad every 15 minutes it will turn off. By the looks of it turning off undoes all progress being made.
    How can I use my ipad again?
    How can I have my ipad finish "Updating to iCloud settings".

    Try a reset ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

  • How long does it take for an ipd 32gb 4g reset take

    i tried resetting an ipod i bought. they left all their music and apps on it. I reset it through the ipod settings and its been almost 5 hours and still no luck

    Well that really helps me!
    These are user-to user forums--Apple is not here other than Mods keeping the wheels from falling off. The only section where you might get help from people doing what you do are the Developers forums here:
    Developer Forums

Maybe you are looking for

  • Constrain option in Dashboard prompt hurts performance

    I want to constrain the choices available for one prompt based on the value of the first prompt. Both of these values come from dim tables. If I don't have the constrain option checked, the values populate within seconds. With it checked, though it t

  • How to adjust external monitor brightness / contrast

    I just recently bought a MacBook Pro, and I am trying to calibrate my Lacie photon20vision (not mark II) but cannot figure out how to adjust the brightness and contrast. The problem lies in that when using the DVI input on the monitor the on screen a

  • Asr fails to scan DMG for restore

    Hi everyone, I have an Applescript droplet that customizes an app based on the contents you drop on it, and send off some parameters to a shell script for packaging into a dmg, etc. The problem I have is that once I create the dmg and place items ins

  • Labview 8.2 close or crashes when opening up Test Exec. from labview 5.1

    Why  would Labview 8.2 close or crashes when opening up Test Exec. from 5.1? Labview 8.2 begins to load the Test Executive VI, then, stops and closes labview altogether.  I remember getting it to load before but do not know what could be causing this

  • NIDAQ 6.9.3 does not install documents

    Using NIDAQ 6.9.3 downloaded from NI site. Installs the drivers but does not install the documents. If I run the docsetup.msi it gives the option to select documents and tries to install them, but cannot find the PDF's. I am left with links to non-ex