How long does upgrade take?

     Today I upgraded from 10/2 to 20/5.  How long does it take to see the results, my account shows 20/5 service and the person I spoke with said something about 10:00 pm.  Do I have to shut the pc down and reset the router, or will I see the speed increase through speedtest.net?
                                                                                   Thanks

Pc,No need to shut down.
Your router probably not,But you can re-boot it later to see.
It should be automatic,Run some speed tests after 10 pm to see.
Verizon probably needs to reset their internal routers though.(might be wrong here)

Similar Messages

  • "How long does it take to do a dist-upgrade on your distro?"

    Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
    This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
    The Computer
    Dell OptiPlex GX110
    [jada@arch-02 ~]$ cat /proc/cpuinfo
    processor : 0
    vendor_id : GenuineIntel
    cpu family : 6
    model : 8
    model name : Pentium III (Coppermine)
    stepping : 6
    cpu MHz : 797.452
    cache size : 256 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 2
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
    bogomips : 1596.45
    clflush size : 32
    [jada@arch-02 ~]$
    I used the following command for the update
    $ time pacman -Syu
    The Test
    first update pacman
    [root@arch-02 jada]# pacman -Syu
    warning: current locale is invalid; using default "C" locale
    :: Synchronizing package databases...
    core 23.8K 80.0K/s 00:00:00 [#####################] 100%
    extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
    community 341.0K 295.8K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    :: pacman has detected a newer version of the "pacman" package.
    :: It is recommended that you allow pacman to upgrade itself
    :: first, then you can re-run the operation with the newer version.
    :: Upgrade pacman first? [Y/n] y
    resolving dependencies... done.
    looking for inter-conflicts... done.
    Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
    Total Package Size: 1.19 MB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
    libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
    pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
    checking package integrity... done.
    cleaning up... done.
    (3/3) checking for file conflicts [#####################] 100%
    (1/3) upgrading libarchive [#####################] 100%
    (2/3) upgrading libdownload [#####################] 100%
    (3/3) upgrading pacman [#####################] 100%
    >>> The makepkg.conf syntax has changed, please note the new format
    >>> when merging the pacnew file with your old configuration.
    >>>
    >>> The pacman.conf default file has changed. Please update your
    >>> config to use the single mirrorlist, and any additional files
    >>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
    >>>
    >>> The location of sync DBs has moved from /var/lib/pacman/ to
    >>> /var/lib/pacman/sync/ for several reasons. To delete older
    >>> DBs, please run pacman -Sc and follow the instructions.
    >>> You will also have to run pacman -Sy to refresh the sync DBs.
    >>>
    >>> abs is no longer included; please install the 'abs' package
    >>> to use abs. You may need to edit abs.conf to re-enable repos.
    [root@arch-02 jada]#
    restart pacman 3.1.1 and update the packages
    [root@arch-02 jada]# time pacman -Syu
    :: Synchronizing package databases...
    core 23.8K 80.3K/s 00:00:00 [#####################] 100%
    extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
    community 341.0K 302.5K/s 00:00:01 [#####################] 100%
    :: Starting full system upgrade...
    :: Replace mktemp with core/coreutils? [Y/n] y
    :: Replace mpg321 with extra/mpg123? [Y/n] y
    warning: bind: forcing upgrade to version 9.4.2-1
    warning: cpufrequtils: forcing upgrade to version 002-3
    warning: dnsutils: forcing upgrade to version 9.4.2-1
    warning: flex: forcing upgrade to version 2.5.33-4
    warning: opera: forcing upgrade to version 9.25-2
    resolving dependencies...
    warning: dependency cycle detected:
    warning: bash will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: readline will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: ncurses will be installed before its glibc dependency
    warning: dependency cycle detected:
    warning: db will be installed before its coreutils dependency
    looking for inter-conflicts...
    Remove: mktemp mpg321
    Total Removed Size: 0.08 MB
    Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
    kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
    acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
    pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
    mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
    cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
    libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
    pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
    binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
    glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
    dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
    e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
    openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
    kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
    diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
    perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
    bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
    bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
    bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
    cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
    device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
    csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
    dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
    docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
    enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
    libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
    epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
    gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
    smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
    poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
    libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
    faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
    file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
    firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
    font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
    font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
    glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
    fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
    gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
    libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
    pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
    gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
    glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
    gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
    gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
    gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
    gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
    nautilus-2.20.0-4 gnome-control-center-2.20.3-1
    gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
    gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
    tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
    gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
    gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
    gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
    grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
    gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
    gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
    vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
    hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
    hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
    imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
    iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
    jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
    lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
    qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
    poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
    libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
    klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
    mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
    less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
    libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
    libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
    libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
    libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
    logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
    make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
    mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
    nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
    netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
    nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
    openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
    patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
    pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
    vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
    postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
    procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
    qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
    rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
    seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
    sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
    sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
    tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
    totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
    udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
    vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
    wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
    xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
    xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
    xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
    xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
    xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
    wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
    xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
    xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
    zenity-2.20.1-1
    Total Download Size: 743.90 MB
    Total Installed Size: 748.87 MB
    Proceed with installation? [Y/n]
    Proceed with installation? [Y/n] y
    :: Retrieving packages from core...
    ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
    readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
    bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
    kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
    tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
    xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
    xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
    xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
    yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
    zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
    :: Retrieving packages from community...
    freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
    gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
    xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
    checking package integrity...
    (349/349) checking for file conflicts [#####################] 100%
    ( 1/349) upgrading ncurses [#####################] 100%
    ( 2/349) upgrading readline [#####################] 100%
    ( 3/349) upgrading bash [#####################] 100%
    ( 4/349) upgrading kernel-headers [#####################] 100%
    ( 5/349) upgrading tzdata [#####################] 100%
    ( 6/349) upgrading glibc [#####################] 100%
    (340/349) installing wavpack [#####################] 100%
    (341/349) upgrading xine-lib [#####################] 100%
    (342/349) upgrading xinetd [#####################] 100%
    (343/349) upgrading xkeyboard-config [#####################] 100%
    (344/349) upgrading xmms [#####################] 100%
    (345/349) upgrading xorg-server [#####################] 100%
    :: Could not detect nvidia-utils on system
    :: Will attempt to use built-in libwfb
    (346/349) upgrading xorg-xinit [#####################] 100%
    (347/349) upgrading xscreensaver [#####################] 100%
    (348/349) upgrading yelp [#####################] 100%
    (349/349) upgrading zenity [#####################] 100%
    real 56m46.062s
    user 4m25.013s
    sys 1m46.520s
    [root@arch-02 jada]#
    And for your tread question.
    How long does it take to do a dist-upgrade on your distro?
    one hour
    real    56m46.062s
    user    4m25.013s
    sys     1m46.520s
    After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
    Archlinux rocks

    JaDa wrote:Archlinux rocks
    definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
    root@moe:~ # apt-get upgrade
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these.
    The following packages have unmet dependencies.
    E: Unmet dependencies. Try using -f.
    root@moe:~ # apt-get -f install
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Correcting dependencies...Done
    The following extra packages will be installed:
    exim4-base exim4-daemon-light
    Suggested packages:
    exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
    The following packages will be upgraded:
    exim4-base exim4-daemon-light
    2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
    1 not fully installed or removed.
    Need to get 0B/1391kB of archives.
    After unpacking 8192B of additional disk space will be used.
    Do you want to continue [Y/n]?
    Preconfiguring packages ...
    dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
    exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
    Package exim4-daemon-light is to be removed.
    Package exim4-daemon-heavy is not installed.
    Package exim4-daemon-custom is not installed.
    dpkg: error processing exim4-daemon-light (--remove):
    Package is in a very bad inconsistent state - you should
    reinstall it before attempting a removal.
    Errors were encountered while processing:
    exim4-daemon-light
    [ Rootkit Hunter version 1.3.0 ]
    File updated: searched for 152 files, found 131
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    root@moe:~ # apt-get install exim4-daemon-light
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    You might want to run 'apt-get -f install' to correct these:
    The following packages have unmet dependencies.
    exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
    E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
    root@moe:~ #
    It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

  • How long does it take for Apple to send the content code for a free upgrade to Mountain Lion?

    Has anyone managed to successfully receive the content code in their email for a free ugprade to Mountain Lion?
    I bought my MBP on 14 July so I qualified for the free upgrade. Went to the website and filled in the form along with my serial number about 2 nights ago. Still haven't received my content code yet. How long does it take? Should I be speaking to someone already? Who?
    Thanks.

    We are being advised it can take up to 72 hours !

  • C3-00::How Long Does It Take To Upgrade Firmware.....

    Hi
    I am want to upgrade my nokia c3-00 firmware from 04.60 to 08.70 through PC via Usb cable...
    How long does it take to upgrade,It moves to 5 MIUTES REMAINING and stucks there for hours...
    I m upgading it first time...Please tell how much time it takes?? 

    With a Broadband connection, it should not take more than 30-35 minutes..
    Check thru' NSU ...

  • Sent an upgrade back that I didn't want. HOw long does it take for the upgrade date to reset?

    It has been almost a week since return and my upgrade date has not adjusted.. How long does this take?
    Thanks for all your help.

    I am sorry to hear you sent back your upgrade thefrankster58! I have sent you a direct message so I can look into this for you.
    AmberF_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • HT201364 How easy is it to upgrade to Mavericks from 10.6.8? How long does it take and what benefits do you get, please?

    How long does it take to upgrade to Mavericks and what benefits for the 10.6.8 user? Is a straightforward download? Thank you, Kevin
    What application do I select to facilitate the download?

    Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table
    Also note that Rosetta is no longer supported in Mavericks, Mountain Lion and Lion.
    kevart wrote:
    How long does it take to upgrade to Mavericks and what benefits for the 10.6.8 user...
    MAVERICKS...
    Check here to see if your Mac is compatible...
    http://www.apple.com/osx/how-to-upgrade/
    If so... would recommend at least 4GB of RAM... if not 8 GB
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com
    The above site also has videos on how to Install RAM should you need it...
    NOTE:
    It is both Prudent and Recommended to Backup Before any Major Update or Upgrade.
    Mac World Installing Mavericks.
    http://www.macworld.com/what you need-to-know.html

  • How long does it take to download mountain lion upgrade?

    how long does it take to download the upgrade for mountain lion

    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • HT201318 How long does it take for the storage to be upgraded? I bought it this morning and it still hasn't gone on?

    How long does it take for the storage to be upgraded? I bought some 12 hours ago and it still hasn't gone on my iPhone 4

    Hi Katie,
    Where are you looking on your phone to determine how much storage you now have? Are you looking under Settings>iCloud>Storage & Backup?
    If so, and it still doesn't show the correct storage, try resetting your phone. Hold down the Home and Power buttons and continue to hold them down until the Silver Apple appears. Then check your storage again.
    Post back with questions!
    Cheers,
    GB

  • How long does it take to get the upgrade code for mountain lion?

    after submitting the online form how long does it take to get the code emailed from Apple?

    sent a complain at around 9:30 PM (PH time) and got a reply at around 11PM. Got the code at around 1PM today.

  • How long does it take to run execute dbms_stats.gather_dictionary_stats

    Hello,
    How long does it take to execute dbms_stats.gather_dictionary_stats? I need to run this prior to upgrading 10.2.0.2 aix to 11.2.0.2. I like to know how long it takes to execute because this is a very busy Production system and I do not want to take too much resource and db time from a busy Production system. Thank you.

    I guess that is when Resource Manager comes into play:
    http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/dbrm.htm

  • Installing Windows 2003 Server Standard/XP is very slow- how long does it take?

    Hello, I'm looking for some ideas here...  I tried installing Windows 2003 on my newly build computer, but after 3 hours it still wasn't installed, and seemed to just be really really slow, and not frozen.  I ended up giving up and tried putting windows xp on it, but after an hour it still didn't finish installing.  I figure there really has to be something wrong here...  The only thing out of the ordinary is that I'm using 4GB ram DDR2 667.  How long does it take to install windows xp on your system?!?
    Things that I've tried have been:
    disabled hypterthreading
    loaded optimized settings
    changed sata to mode II
    MSI 945G Neo-F Socket T (LGA 775) Intel 945G ATX Intel Motherboard
    Seagate Barracuda 7200.9 ST3160812AS 160GB 7200 RPM SATA 3.0Gb/s
    Intel Pentium 4 650 Prescott 800MHz FSB LGA 775 EM64T
    pqi TURBO $GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400) Unbuffered Dual
    POwer: Ultra Xfinity 500Watt ATX +5v +3.3v +12v1 +12v2 -12v +5vsb
    BIOS 1.2
    Optial Drive: Generic Toshiba DVD

    1&3 and 2&4 seem to be working okay,  I've tested all these combinations (this is just plugging in the memory and looking at the cpu in task manager)
    mem1 in slot 1 okay (tested slot 1 okay)
    mem1 in slot 1 
    mem2 in slot 3 okay (test 2gigs in duel channel first set of memory okay)
    mem3 in slot 1
    mem4 in slot 3 okay (tested 2 gig in duel channel second set of memory)
    mem1 in slot 2 okay (tested slot 2 okay)
    mem1 in slot 2
    mem2 in slot 4 okay (tested the second duel channel okay)
    mem1 in slot 1
    mem2 in slot 3
    mem3 in slot 2
    mem4 in slot 4 high cpu 
    mem3 in slot 1
    mem1 in slot 2
    mem4 in slot 3
    mem2 in slot 4 high cpu 
    I upgraded to the latest bios, no luck...  I haven't run any extensive memory tests, but through the tests i did, it seems that the memory is okay.  Given these tests do you think it is more likely a problem with the motherboard running 4 slots?  Or maybe some power issue, where the  4 sticks of memory are not getting enough power to work right.
    The power supply I am using is Xfinity 500W
    +5V/30A +3.3/30A +12V1/16A +12V2/18A -12V/0.6A +5VSB/2.5A
    Thanks for your feedback..

  • How Long Does It Take To Download The iOS 8.0.2 Update?

    How long does it take to download the iOS 8.0.2 upgrade?
    I'm downloading it now through iTunes and it's been about 1 1/2 hours so far and it says there's another 2 hours to go.

    Maybe there are some server problems: Can't restore iOS 8.0.2

  • How long does it take to install mountain lion

    how long does it take to install mountain lion

    It depends on a number of factors - the speed of your computer and hard drive mostly. My experience has been that a standard upgrade will take 30-45 minutes. If you are erasing the hard drive and installing, it takes about 20-30 minutes, not counting migrating your data and applications.
    This doesn't count downloading which can take as litting as 40 minutes (a very fast broadband connection during off hours) to as much as several hours.

  • How long does it take to create a recovery disc?

    Hi!!!
    I have just bought a Toshiba Portege T110.
    I tried the first time round and cancelled at disc 4 bec i was out of writeable disc.
    Today i am on my 2nd try.  I have mgt disc 1-3.  When at disc 4~~it says is creating Windon Recovery Environment (64bit) and recording.  But the progress bar has been hanging there for the abt 1-2hrs and still not done yet~~
    I tried to cancel the program, but it says is recording and advise me not to cancel as it will take a long time.
    Can some kind soul advise if this is normal?  How long does it takes?  If not, what could be the problem?
    Thank you in advance!!!

    Hi all~~
    i have the answer to my question alrdy~~
    i accidentatly canceled the copying after waiting over 2 hr on disc 4~~
    I restarted the process this morning~~~as i have alrdy done disc 1-3~~i am able to start at disc 4 straight away!!!
    Disc 4 took less then 10 mins to complete. 
    So guys~~ the whole process from disc 1 to 4 takes less than 1 hr.
    All the best to you guys!!
    And Merry Christmas!!

  • So how long does it take to load a 160GB iPod using the Convert Higher ...

    I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
    http://www.samsoft.org.uk/iTunes/grouping.asp
    The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
    Finally the point of the post...
    *So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
    *I would like to hear the experiences of others.*
    Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.

    With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
    I know I would rethink my purchase but would most likely end up buying the Micro anyway

Maybe you are looking for