How long has the 'hey siri' function worked unplugged?

I use my idevices and siri everyday for hours, I'm familiar with all of ios' functions. But I just discovered while using my iPhone 6 with ios 8.3 that after you hold the home button down activating siri, then ask a question, as long as you keep the siri screen open the 'hey siri' function works unplugged. Has this been the case since ios 8.0?

simonp_au wrote:
Ok, well after I press the home button as usual (unplugged), then ask siri a question, siri then answers. That's the way it has always worked, yes. But, if you leave the siri screen open, while unplugged, then say 'hey siri' siri activates again. Try it. And that has not always been an available function.
I can confirm that it works. My recollection is that Siri always remained open for a minute or so after a query, but you would have to push HOME again for another question. Nice feature!

Similar Messages

How long has the current SPID/Agent Job been running

I have a SQL Agent Job that has 15 steps. Each step executes the same CLEANUP sproc against a database. STEP1 executes CLEANUP against DB1, STEP2 executes CLEANUP against DB2, etc. These 15 databases all have the exact same schema (that was the design
decision - not going to change). The job can run for days. I want to have a MAXMINUTESTORUN configuration (probably set to 4 hours) that the sprocs will check and when that is exceeded the sprocs will nicely terminate and then pick up again
the next time. I want to be able to ask in the sproc, how long has the spid/agent job been running. How is the best way to do this?

Well, the idea for that,
the clean up always runs first on the database it never before and then it will run against the database that has oldest 'Lastrun". you can change this logic if you need.
Using the demo scripts above, try this ...after the scheduling the job.
1. run the job once..it will run the procedure for testA
2.check the output of select * from msdb.dbo.cleanupjob
3. run the job again..it will run the procedure for testB(the reason it picks this is because the cleanup procedure never ran for database testb)
4.check the output of select * from msdb.dbo.cleanupjob
5. run the job again..it will run the procedure for testA(the reason it picks this is because the cleanup procedure ran for database testb atleast once and
will the pick the oldest "last run " database)
6.check the output of select * from msdb.dbo.cleanupjob
you can also ,,replace this block
select top 1 @a= databasename from
(select top 1 1 source,databasename from cleanupjob
where (lastrun is null)
union
select top 1 2 source,databasename from cleanupjob
where (lastrun in (select min(lastrun) from cleanupjob where lastrun is not null))
order by source) A
with
select top 1 @a=databasename from msdb.dbo.cleanupjob where isnull(lastrun,'19000101') in (select min(isnull(lastrun,'19000101')) from msdb.dbo.cleanupjob)
order by id
Hope it Helps!!

How to implement the barcode printing functionality working on the Prod.

Hi,
Can anyone help me "How to implement the barcode printing functionality working on the Prod".
Thanks
Gangadhara

Check this link --> barcode

How to get the Wiki search functionality working?

hi,
Another Wiki question regarding the 7.1u1 Portal wiki functionality: What is necessary to get the wiki search functionality working? Right now when using the wiki search page all it does is return to the search form, no errors but no hits either. I guess some additional administrative work is needed to get search working?
thanks, tom

haven't touched anything except for the wiki template jsps to change the design. it is a linux rh4 install. there are no communities on that server (yet), just the wiki portlet in a tab so far. is the wiki search dependent on the portal search server or totally separate (ie self contained wiki search)? any additional services or such that need to be started for it to work?

How long has the lines issue been around?

Just curious. I just got my new powerbook and I am fairly upset at the presence of these lines. Is this something that apple has known about for months or is this a new issue all together? Basically, i just want to know how long everyone has been waiting for an announcment on this issue.

Well, a more precise answer is :
PB15"HiRes release : Oct. 19th
First post on horizontal lines : Oct 25th.
L.

How exactly does the logical shift function work?

I think I am missing something very basic here - I am trying to left shift an 8 bit unsigned integer by one place (x<<1)in each iteration of a while loop. So if I start with a number, say 18, the first iteration I get 36, then 72, 144 and after this 32, 64 and so on. I'm not able to do this apparently simple operation in LabVIEW. I tried the logical shift function and a formula node, but both dont give me what I need. The formula node appears to be close in that it gives me 18,36,72,144 but after that I get 255 rather than 32. I dont understand what the logical shift function is doing here. I have attached a vi here that shows what I am trying to do. Any help explaining the mistake I am making will be greatly apprec
iated.
Thanks.
Attachments:
Logical_Shift.vi ‏17 KB

You have the inputs confused. If you want to left-shift by 1 at each iteration, the "1" goes on the upper "y" terminal and the number from the shift register (the "shiftee") goes at the bottom. (see attached modification).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Logical_Shift_2.vi ‏27 KB

How long is the battery supposed to work

I've got a gen5 ipod and it only play 6hours music. IS it something i could do to change it?

James,
Not a bad site. Well done.
However, before the Moderators possibly shut down this post, see this link and adjust your future posts accordingly:
sysop, "Apple Discussions Terms of Use", 07:35am Jul 13, 2000 CDT
The relevant portion of it:
i "No advertising. Don't use the Site to sell or market your products to users. If you receive compensation or personal benefit from a purchase or site you advocate, or from an affiliate link, you must note this in your Submission by stating, "I may receive some form of compensation, financial or otherwise, from my recommendation or link." Advertisements for items that do not directly answer another user's question are not allowed."

How Long Has The iCloud Website Been Crashing?

I recently had to get a new iPhone, well iCloud doubled my contacts so I went into the iCloud website to delete my extra contacts and everytime I go to delete the selected contacts iCloud crashes and closes my safari window. Anyone else having this problem?

Well, a more precise answer is :
PB15"HiRes release : Oct. 19th
First post on horizontal lines : Oct 25th.
L.

I had completed my iDVD project and burned a disc. It worked great! Then someone messed with the project and put a red frame around the opening screen. Now when I burn the project, it no longer has the opening frame. How can I fix?

I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that has the Wedding theme with music. Now when I burn the project to make more DVDs, it burns but no longer has the opening frame. It immediately opens to the iMovie slideshow. How can I fix so I can burn the entire project with opening frames?

As Bengt suggested make a disk image of the successfully burned DVD using Disk Utility. Then you can burn copies any time you need one.
In the future once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
You can then burn it to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

HT4623 Hi!My iPAD lost its charge fast !!I've got an iPAD capacity 57,1GB and it has available 55,1GB ,version 7.0.4 .I'd like to know how long does the battery last when it is 100 % charged.

Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!

I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
Any other ideas?
Come on, people.
Thanks,
Doug

My new Hey Siri stopped working. How can I get it to work again?

My new Hey Siri stopped working. How can I get it to work again?

Just to clarify, it only works when the phone is plugged in and charging. What happens when you try to activate it? Is there any error message?

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

How do I restore the function of the awesome bar? I no longer get the awesome bar function when I want to open a new tab.

I do not know how to restore the awesome bar function. All I get now is the AVG Search window when I try to open a new tab.

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How the Drill down functionality works if the source is Bex Query

Dear All,
How the Drill down functionality works if the source is Bex Query through the query browser in Dashboard 4.1
Please let me know process.
Thanks
Regards,
Sai

Hi sai,
Drill down can be done by two ways.
1. you need to bring all the data in one shot to the spreadsheet and then by using the components you can achieve it. Below given link explains in detailed about that.
Filtering Through Combo Box
2. you can use different set of query to pass the value from one set to another to fetch the data using the prompt. please check the below which explain them.
Difference between "When value Becomes & When value Changes"
Revert any clarification required on this.
--SumanT

GRC - Role Expert v5.2: how does the Transaction Usage functionality work

Hi All,
re: GRC - Role Expert v5.2: how does the Transaction Usage functionality work
We are implementing GRC suite v5.2, but specifically my question is regarding Role Expert:
SAP documentation states that it is possible to use Role Expert to do the following: for roles allows you to see if, or how much, a transaction is being used, when it was last used, and who used it.
My question is how without Audit Log or RBE?
Let me know if you have ever used this functionality and if it requires the SAP Back-End Audit Log to be turned on or RBE.
Thanks in advance!

Hi Gary,
You dont need a RBE tool activation to get the successful transaction usage log with Role Expert.
Role Expert functionality allows you to log all the transactions that have been added/deleted to the role that is changed. Also when you create a new role via the Role Expert then automatically the transaction log starts.
If you go the "History" tab in the Role Expert, then you can find all the last changes made to the role.
Also you can go to the "Risk Analysis" tab to find the log of Risk Analysis performed with the added tcodes.
Hope this helps.
Thanks,
Kiran Kandepalli.

How long has the 'hey siri' function worked unplugged?

Similar Messages

Maybe you are looking for