How long is a 301 redirect cached before it expires?

I have two domain names, let's call them example.com and example.org. Originally, example.com redirected with a 301 redirect to example.org. Now I would like to reverse it, so example.org redirects to example.com.
I understand that 301 redirects are cached in Firefox. I am able to clear the cache in Firefox and get the new website. My question is, for other users, how long is the 301 redirect at example.com cached before Firefox goes and checks again to see if anything has changed?
Another related question: Let's say I add a 301 redirect on example.org to example.com. Then a user who has the old 301 redirect on example.com in their cache tries to visit example.com. Firefox will send them directly to example.org, and they will then get a 301 redirect back to example.com. What will Firefox do then?

If you actually take care of your device... the only limit on it's life is the battery. 
Apple makes no statements, from what I've found, on the life expectancy of the battery.  That being said, many people are still using original and 3G iPhones with the original battery, so that's 4-5 years at least.

Similar Messages

  • HT1657 How long do I have to wait before I can rent a movie

    How long do I have to wait

    You don't need to wait at all before you can rent a movie.
    If you mean how long have you got to wait before you can watch it, that's very much depends on your Internet connection speed.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    For instant viewing 1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • I AM TRYING TO DOWNLOAD MUSIC FROM I TUNES TO MY NEW IPOD BUT I KEEP GETTING "APPLE ID HAS BEEN DISABLED."  HOW LONG DO I NEED TO WAIT BEFORE IT'S "ENABLED" AGAIN?

    i am trying to download music from i tunes to my new ipod touch but i keep getting the message "apple id has been disabled."  how long do i need to wait before it's "enabled" again?  or what can i do to "enable" it again?

    Have you tried the links on this page http://www.apple.com/support/appleid/ ?

  • HT4479 How long do i have to wait befor my face time is active

    How long do i have to wait befor my face time is active

    Hello SassyMurad,
    Thank you for the details of the iMessage issue you are experiencing.  I recommend following the steps in this article when you are not able to activate iMessage on your iPod touch:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?

    I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?  And on how many computers can I install this product? Thanks.

    What version exactly did you buy? If you bought CS6, then the license is perpetual and doesn't need any extension. If you bought CC, then you need to renew your plan every year. You can install each Adobe software on 2 machines with a single license for non-concurrent use.
    Mylenium

  • How long is a iphone life span before it stops working

    how long can you use a iphone before it needs repair or it is dead?

    If you actually take care of your device... the only limit on it's life is the battery. 
    Apple makes no statements, from what I've found, on the life expectancy of the battery.  That being said, many people are still using original and 3G iPhones with the original battery, so that's 4-5 years at least.

  • How long will the progress indicator spin before safe mode progress bar shows up?

    How long will the progress indicator spin before safe mode progress bar shows up?

    Not a good sign,  your HD is failing or has serious block problems. It might be possible to reformate the drive and start over.
    or something more agressive to do the repair, like Disk Warrior http://www.alsoft.com/diskwarrior/
    You need a backup plan in place here.
    more information here in a similiar thread:
    https://discussions.apple.com/message/17623074#17623074

  • Configure how long a automatic activity  can run before timeout

    I have a long running job in this step. Can I configure how long that automatic activity can run before it will time out. How do I configure this when running in the BPM Studio and when deploy the apps to the server?
    Alternatively, I was try to use a SecureShell to run a unix job with nohup but somehow it doesn't execute properly and the shell would exit out but the script would not run. When I run the same nohup command line in the external host, it does run properly. Is there any special way to call nohup through SecureShell.
    Thanks,
    Wing

    You can define the timeout of the BP-Methods that is actually the value that should be used for the method in your automatic activities. This is configured into the Engine preferences and it's the Maximum BP-Methods+ Timeout parameter, both for the studio and the enterprise.
    Remember to handle the timeout exception when using this parameter. If not correctly handled, your process will abort.
    HTH
    Giuliano

  • How to create HTTP 301 redirect from UCM 7.5.2

    Is it possible to send a HTTP response with a permanent redirect from a UCM/Stellent website? We're using version 7.5.2 with iDoc script.
    We can use the iDoc function setHttpHeader() to send the Location HTTP header, but how to send the HTTP response code 301, to signal the permanent redirect to the browser?

    Hi Rob,
    If you are using IIS there is a config variable that allows you do this. First create a virtual directory in IIS point to <install dir>\Inetpub\wwwroot directory.
    and then do the below steps
    a.     Login to Content Server
    b.     Click on Administration Admin Server
    c.     Click on Content Server instance name(button)
    d.     Click on General Configuration
    e.     Update SSWebFilterIgnoreList configuration variable
    f.     SSWebFilterIgnoreList=virtualDirectory There should not be any spaces
    g.     Click on save
    h.     Restart Content Server
    Let me if this is what you are looking for.
    regards,
    deepak

  • How long should I have to wait before I get a spee...

    I have had weeks of problems with slow broadband issues due to a line fault which only shows when it is wet.
    They have appeared to fix the problem on Friday at long last as I did not lose my line when it rained today but my speed has remained between 0.00 and 0.13.
    I have been told they have reset my profile which normally increases my speed in minutes but not this time.
    I am told by one bt broadband support person I could have to wait 10 days, anothe person says 48 hours.
    I cannot understand why the speed does not increase a bit, my normal speed is between 1.5 and 2mb
    My latest figures from BT wholesale speed test is as follows:
     Download speedachieved during the test was - 0.13 Mbps
     For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
     Additional Information:
     Your DSL Connection Rate :1.98 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 0.14 Mbps
    Sppeds of just 0.13 is almost unsable, sometimes I cannot even get a page to display.

    you currently have a connection speed of 1.98mb but due yo previous problems your profile is at rock bottom of 0.14mb.  this should normally fix itself automatically given a stable connection 24/7 for 3/5 days.  can you post router stats to show if connection time 3+ days
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • WHY CAN'T I COMBINE FILES WITH RIGHT CLICK ANY MORE? HOW LONG AM I EXPECTED TO WAIT BEFORE SWITCHING TO A COMPETITOR'S PRODUCT?

    I used to be able to select a set of documents in the Windows file explorer, right click these highlighted documents, and then right click-->Combine Files in Acrobat.
    This used to open the combine files page in Acrobat and I would be able to combine the files directly.
    Now when I use right click to combine files in Acrobat it simply opens Acrobat. If I want to combine the files I have to go to Acrobat, select the option, and then navigate to the files.
    This similar issue exists for edited PDFs. I used to be able to right click a document and select "Edit with Adobe Acrobat" and the document would open when this option was selected. Now if this option is selected it opens Adobe Acrobat and I have to navigate to any files I want to use.
    How do I use the right click features in the file explorer? These features don't work any more and they used to.

    Hi
    Could you please tell which Acrobat version you are using and also the OS- Windows 7 or 8.1?
    Also can you please tell whether you are getting Acrobat specific combine and Edit options in the right - click menu?
    If yes, are they working or nothing happens on clicking them?
    If possible, can you also try to restart your system and then try Right-click -> combine files in Acrobat?
    Thanks
    Tanvi

  • HT5037 It all started when I couldn't order a Photo Book ... then I had to download Mavericks ... then the i-photo update ... How long DO you have to wait before you know if you actually have downloaded this?

    It all started when I could not order a Photo Book ... then I had to download Mavericks ... then I tried to upgrade i-photo ... but it would not take my debit card ... so I had to find a credit card ... then it would download, but it took hours and did not confirm that it had downloaded ... which it hadn't because I still can't order a photo pbook ... then it would download ( but I suspect I may have had to pay for it twice ) .... and now i-photo won't open because it says I need the Library Upgrader ... and it too seems to have stopped halfway through downloading.
    I JUST WANT TO ORDER A PHOTO BOOK.  I HAVE THE MONEY.  WHY ALL THE PROBLEMS?  WHY, OH WHY, OH WHY?

    Perhaps, as your problem seems to be with the App Store, you need to post on that forum or contact App Store support - there's a link on the right hand side of the App Store window.
    A small tip: explaining your problem clearly is best. Wrapping it all up in idiosyncratic punctuation and histrionics doesn't make it any easier to understand, and gets in the way of solving your problem.

  • How long do you charge iPod Touch before opening it?

    Just bought it.

    i charge it for 4 hours if the battery is almost empty.
    i charge it every night while sleeping so thats not a problem.

  • How to register a callback for cache objects that expire it's TTL?

    My scenario is a list of calling telemetry agents, pinging the server with some status. I need to adjust the control rule when devices drop but I need to know what was the device last contribution.
    How do I find all the objects that are about to expire without having to periodically vacuum the cache?
    Does TTL expiration fire a notification with the existing object (before removing it) to the callback?
    If yes what is the filter operation: Remove?

    The documentation makes no description on how the duration parameter interacts with notifications.
    I tried a sandbox project.
    Created a DataCache object.
    Register a callback with filter:
    DataCacheOperations
    filter = DataCacheOperations.RemoveItem;
    The callback sends to the Output screen the notifications
    public static void OnCacheNotificationReceived(string myCacheName,
    string myRegion,
    string myKey,
    DataCacheItemVersion itemVersion,
    DataCacheOperations OperationId,
    DataCacheNotificationDescriptor nd)
    //display some of the delegate parameters
    Debug.WriteLine("A cache-level notification was triggered!");
    Debug.WriteLine(" Cache: " + myCacheName);
    Debug.WriteLine(" Region: " + myRegion);
    Debug.WriteLine(" Key: " + myKey);
    Debug.WriteLine(" Operation: " + OperationId.ToString());
    Debug.WriteLine("");
    Inserted 1 object using a duration of 30 seconds
    _cache.Put(key, obj, TimeSpan.FromSeconds(30));
    Then sleep 10 minutes:
    Thread.Sleep(TimeSpan.FromSeconds(600));
    The callback fired about 5 minutes after the Put method.
    Here is my config
    <dataCacheClient name="default">
    <autoDiscover isEnabled="true" identifier="[my role]"/>
    <clientNotification pollInterval="30" maxQueueLength="10000"/>
    </dataCacheClient>
    What I did wrong?

  • How long should you charge your new iPhone before using?

    How long should I charge my phone before using?

    There is no required charging time. Use it and charge it when its convenient.
    You should however not let it drop below 20% charge too often.  Once a month is suggested to re-calibrate the battery meter.
    Other than that charge and use as you like.

Maybe you are looking for