How long is Hyperv WMI provider (V1 is supported) in coming windows server versions

Hi Guyz,
We currently have Windows Server 2008r2 servers and recently moved few of them to windows server 2012.  we have lot of powershell scritps that we require for adminstrative purposes and all of them are using Hyperv Wmi Provider (\Root\Virtualization)
via powershell and even after moving to windows server 2012 , we found that the support for WMI provider  1 is available in 2012. But we want to know that is this support always there in coming future versions for hyperv..??? because we have lot of complex
powershell functions written and we seriously need to give lot of time if we wanna change it.

The v1 virtualization namespace was announced as deprecated with the release of Server 2012.  This release contained both v1 and v2 namespaces.
The v1 virtualization namespace was fully deprecated with the Server 2012 R2 release.  This release contained only the v2 namespace.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Similar Messages

  • How long does it take for the auto updater to install a new version?

    I've just seen that Flash v11.4.402.287 is available.  How long should I wait for the auto updater to update my system (currently v11.4.402.278)?
    In the past I have waited 2-3 days and the new version still hasn't been installed, even though the Task Scheduler shows that the auto updater is running.  I've then given up and manually installed the new version as I think that this is too long to wait.
    Thanks

    The good news - the auto update has worked this time and I now have v11.4.402.287.
    The not so good news - I've had a look through both flashinstall.log files and there is nothing strange there.  I can see the times when the auto updater has done the update, and also the last 2 times when I've done the update manually.  There aren't any other entries - i.e. the only entries are for successful installations.
    As the update has worked for me this time I think that this can be closed.
    Thanks for your help.

  • How do I use Firebug with a website I created? I want to see how long each thing takes to load on the page. The server is very slow.

    I have created a website/blog with Wordpress. It appears to be on a slow server because it can't be opened or takes forever to open. A representative from Wordpress told me to download Firebug to find out how long each thing takes to load on the page. I downloaded Firebug but I can't figure out how to use it. Please advise.

    OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
    There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
    Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
    best
    Matt

  • How Long Has Apple Been Taking Lately To Support Popular Canon Profiles?

    I can't remember how long the wait was for the 50D or 5DMkII. I'm trying to get a rough idea about how long it may take to support the new 7D.
    Thanks!
    Mark

    5d2 was pretty fast, within two weeks of ship date in the U.S. If I remember correctly, I got my 5d2 the week of thanksgiving and the update came out around December 10. I think it came out before ACR updated even.

  • How do you repair ntoskrnl.exe error or system error in windows server 2008 and 2012

                              
    hi,
    can you repair system file errors like  ntoskrnl.exe in windows server 2008 and 2012  like   like before  in windows server 2003 ?
     the steps were  repairing ntoskrnl.exe  error in windows server 2003
    1- have a 2003 cd and from that cd  start recovery console and copy from i386 directory ntldr and ntdetect.com to  windows /system32 directory on the  server and then repairing
    2- MBR with fixmbr command  and then  rebuild BOT.INI file  with bootcfg/rebuild . 
    now my question  is how you repair or solve such problem with ntoskrnl.exe error  in windows server 2008 and windows server 2012
    thanks
    johan
    h.david

    first this wil take a lot of time for windows 2008 and 2012 ,
    and what about windows 2003 I thing this has no startup repair
    thanks
    johan
    h.david
    What will take a lot of time? Repair or clean install? These days one can standup a new VM and have an operating system on it in around 20 minutes or so.
    Correct server 2003 is file based deployment and completely different OS from repair perspective as well.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How do I get a reliable schedule for automatic update in Windows Server 2012 R2?

    I don't understand why MS broke the automatic update in Windows Server 2012 R2. In previous versions, I used to set it for automatic updates - Saturdays at 2AM. I can no longer pick a weekly update in the GUI and the time seems to have no impact on its capricious
    reboots due to updates.   It might happen 2 days later at noon.   The best option for now is to just shut off the automatic updates but I'm reading this issue has been around since 2012 R1.   There supposedly is a fix/patch for
    2012 but it doesn't say if the patch is for 2012 R2 and the automatic updates haven't installed a fix that actually fixes what is broken with the automatic updates.
    Why even leave the GUI for automatic updates if it doesn't mean anything?
    Is there a simple registry key I can change so updates occur according to the schedule that you created in the GUI?      Please no powershell - worst crutch MS ever created to not fix their own gui.
    I'm seeing people have tried some advanced work around using GPO but many said those don't work reliably either on hosts or domain controllers.

    This may explain:
    http://blogs.technet.com/b/wsus/archive/2013/10/08/enabling-a-more-predictable-windows-update-experience-for-windows-8-and-windows-server-2012-kb-2885694.aspx
    http://blogs.technet.com/b/wsus/archive/2013/06/11/wsus-blog-managing-updates-with-deadlines-in-an-era-of-automatic-maintenance.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

    Hi Every Body,
    1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
    -- I have download all files from e-delivery and check the md5 and all files are OK.
    I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
    2- Was that a problem ?
    -- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
    BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
    even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
    C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
    3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
    thanks in advance.

    Hi,
    Most of the instructions you have mentioned , already was configured.
    except for the tmp and temp directories.
    And even I changed them from System Properties >> Advanced >>  Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
    I attach the conf_VIS.txt file because I thought it may help.
    http://www.4shared.com/document/1bS6aio5/conf_VIS.html
    Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
    Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
    http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
    Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

  • Up to how many CPU sockets are supported by the Windows Server Technical Preview?

    I hope that all of a server's physical sockets are detected so that every core is usable by the operating system.

    I have a situtation that I need to order a new server
    for a new application getting developed?
    I have the idea of no of users will be working on
    them will be around 100
    How will I decide Server with How many CPU do I
    require?
    and how much the amount fo physical memory should I
    order with the Server?
    Which are the factore affecting them and how will I
    decide on them?
    Is there any note given by oracle?Sounds like you need to start at the beginning with some of
    Tom Kyte's books, the Oracle documentation &c.
    You must have some idea of the throughput of your system.
    If you are going to be using tons of I/O, then CPU might be
    irrelevant, but you'd damn sure want the disk (array)(s) to
    be up to scratch,
    on the other hand,
    if you are going to be doing lots of calculating/processing, then
    your CPU might be critical.
    It's a question only you can really answer.
    Post a more detailled spec here, along with a budget*
    and you may receive more assistance.
    Rgs.
    Paul...
    * budget is normally very very important also...
    We could tell you to buy two (one backup) HP-UX boxes
    with 16-way SMP capacity and a 10TB 100 disk SAN, with,
    oh, say, 10 disk controllers, but that's
    not much use if your budget is... ahem... constrained.
    Gagan

  • How do you disable SSL\ CBC Ciphers and Weak Algorythms in Windows Server 2003

    Hello, and please accept my humble thanks in advance.The problem that I'm having is the protocols listed below must be disabled on my Windows 2003 (IIS) Servers before we can pass a PCI audit. Now I've taken care of all of this on Windows 2008R2, but not
    without days and nights of searching the internet for information that is not only clear to understand but accurate, however, I'm not having much luck with 2003.
    Vulnerabilities:
    SSL Server Supports CBC Ciphers for SSLv3
    SSL Server Supports CBC Ciphers for TLSv1
    SSL Server Supports RC4 Ciphers for SSLv3
    SSL Server Supports RC4 Ciphers for TLSv1
    SSL Server Supports Weak MAC Algorithms for SSLv3
    SSL Server Supports Weak MAC Algorithms for TLSv1
    Here's what I've tried, I've done the registry edit as follows, it did not work;
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL]
    "EventLogging"=dword:00000001
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\DES 56/56]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\NULL]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 128/128]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC2 40/128]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 128/128]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 40/128]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\RC4 56/128]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Ciphers\Triple DES 168/168]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\MD5]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\SHA]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\Diffie-Hellman]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\KeyExchangeAlgorithms\PKCS]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Client]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\PCT 1.0\Server]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Server]
    "Enabled"=dword:00000000
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
    Here's what I've tried, I've installed the Microsoft Security Bulletin MS12-006 - Important Vulnerability in SSL/TLS Could Allow Information Disclosure (2643584), it did not work for those issues but it did close the SSLv2.0 problem.
    Is there ANY reason why the registry edit would not work?
    Again, thank you.
    Don
    Also,
    Has anyone seen or used this Hotfix... what is it and how would it relate to this issue.
    An update is available to adds support for the TLS_RSA_WITH_AES_128_CBC_SHA AES128-SHA and the TLS_RSA_WITH_AES_256_CBC_SHA AES256-SHA AES cipher suites in Windows Server 2003
    http://support.microsoft.com/kb/948963

    Hi,
    Hope we could find helpful information in the below KB:
    How to restrict the use of certain cryptographic algorithms and protocols in Schannel.dll
    http://support.microsoft.com/kb/245030
    Please go through it.
    TechNet Subscriber Support
    If you are
    TechNet Subscription
    user and have any feedback on our support quality, please send your feedback
    here.
    Regards, Yan Li

  • How long after introduction until a camera is supported?

    Bought Lightroom so I could process the RAW files off the Nikon D5000 I ordered but I find out now that the Nikon D5000 isn't supported.  Is this going to happen soon, or do I need to return?
    Thank you.

    Hi Cyberhwk!
    There is no set timetable. LR and Camera Raw usually stay somewhat in synch with each other and new cameras are supported with each update. It depends on how forthcoming the manufacturer is or how hard it is to reverse engineer the proprietary RAW format used. Nikon cameras usually get added pretty quickly.
    Most people I talk with shoot JPEG or RAW+JPEG while waiting. LR will support the JPEGs. Also, sometimes, especially with Canon and Nikon, LR can read the RAW file but not fully support it. So it's worth a try until the D5000 is on the supported list.

  • How long do I have to wait until I can get Windows 10 on my Acer Aspire 5750?

    It says, "Ok, nodify me when it is ready" from the "Get Windows 10 app"

    you can download it from Microsoft download tool:http://www.microsoft.com/en-us/software-download/windows10

  • How to disable the "Connect to Second Node" task of the Windows Server 2012R2 and run a customized verision of this task?

    I am running a customized ICT. When I am running the ICT on a single node cluster, it is automatically detecting the if remote node is present? I need to disable this feature of ICT and tweak it to have a customized version of this. How to disable this
    task?

    Hi Sounak Ghosh,
    You can customize the ICT by the following KB:
    Windows Storage Server 2012: Planning and Deployment
    https://technet.microsoft.com/en-us/library/jj643306.aspx?f=255&MSPPError=-2147217396
    Server Manager Extension Schema
    https://technet.microsoft.com/en-us/library/hh825683.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Are there any Adobe's partners provide licensing and support for Adobe Content Server in Germany?

    Hello,
    My name is Quang from Vietnam . My company is interested about Content Server and I am looking for Adobe's partners that provide licensing Content Server (like Datalogics) in Germany. I have some friends there and I hope they can help. If you know any companies, please tell me.
    Thank you

    I would say that it was very funny to stay on Amsterdam, but i really can't remember so much of these days, jeje

  • How to add macbook pro with OSX 10.9.2 to Windows Server 2008 Domain

    I would like to add my late 2013 MBP running OSX 10.9.2 to my company's Windows Network Domain.
    What is the procedure to do so?
    Thanks for your help.

    You ensure that the Mac is in time sync with the domain controller, you hope that you are not on a .local domain, and then you can use System Preferences > Users & Groups > Login Options > and the Join button.  This will provide a simple binding interface.  I prefer to use Directory Utility (there is a button to assist you in launching the tool) as it exposes more of the AD plugins features.
    Alternatively, this can be scripted using dsconfigad.  Or, if you want to explore third party options, there is Centrify, the stuff from Thursby, and others.
    Once you have bound the machine to the domain, you can validate connectivity by using the id command in the Terminal.  Example would be:  id someuser
    someuser should be replaced with the short user name of a user in the Active Directory domain.  If you get back a truncated record of the account, then you are talking to the domain and should be able to authenticate at the login window.
    Be aware that if you have a name conflict (you already have a local account called naresh on the Mac and the AD short name is the same), then you will always login to the local account.  Remove the account or rebuild the local DS database and establish a default local admin account without a conflicting name.
    AD binding is a very easy and highly recommended task for all Macs in Windows centric environments.  It makes the Mac a first class citizen and capable of respecting password policy and access rights.  Do not, you can not push GPO to the Macs without tools like Centrify.
    Reid
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • How to disable the annoying security warning for all users in Windows Server 2008 R2

    Hi,
    The employees from the administration complain all the time about the different types of security warning that they get when trying to run some applications which are used frequently.
    Since the number of the users is too big it is unfeasible to go through all the users and disable the User Access Control at their account settings.
    Is it possible to achieve this through given account policy settings. I want to perform the changes on the server so it applies to *all* (or maybe those of Administration department) users.
    One useful information here can be the following: we use 2 different severs, the application which cause the errors are in the terminal server, and the users are in the main server. Where should I perform the changes?
    Best,
    D

    Hiya,
    It could sound like that one indeed. There are a few options to go for, however it should be fairly easy to find out :)
    Create a test GPO and apply to a limited amount of users. GPUpdate and verify that the GPO has been applied using rsop.msc
    Then open the application to test and see if it has the desired effect. You might need to change more than one setting, depending on the application and desired behavior.

Maybe you are looking for