How long it will take us to do BW-ODB certification normally?

How long it will take us to do BW-ODB certification normally?
SAP Integration & Certification : Integration Scenarios - Business Intelligence (BW-ODB)
thanks

The certification test itself normally takes about half a day. However before that certainly some paperwork has to be done.
So please first go to <a href="http://www.sap.com/partners/apply">www.sap.com/partners/apply</a> and apply for the certification. We will then issue a contract and once this is mutually signed, we can do the test. This whole process can be done in about 3-4 weeks.
Best regards,
Markus

Similar Messages

  • I have to get my 13 in macbook pro with retina display fixed because of an internal crack and I was wondering how long it will take to repair the screen.

    Since I have to get it fixed and I'm a college student and need my laptop asap, I just want to know how long it will take for my screen to get fixed so I can go back to doing my work.

    No one here could possibly know... you'll have to take your machine to your local Apple Store or an AASP to even begin to get an idea as to how much time it could take to fix your machine.
    I had to wait 10 days just to get fans replaced on my old MacBook Pro...
    Clinton

  • I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

    I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

    Warp Stabilising is a two part process.
    Analysis and Stabilising.
    Both have a banner across the Program Monitor during the process ( unless you have turned that off.
    Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
    You may need to hit "Analyse" Button again.
    You should see the number of frames and the estimated duration during this process.

  • HT3302 How much will be charged for replacing a cracked screen for iPhone 5? How long it will take for repair?

    Hi Folks,
    I am a visitor and had my iPhone 5 cracked the front screen today, I just want to know how long it will take for repair if I send to Apple USA, and the charge for the replacement of the cracked screen.
    Thanks for your advice in advance, I am currently in LA and will put into LA Apple Store asap.

    Warranty and support are only valid in the country of origin.
    If the device was not purchased in the US, an Apple store in the US will not touch it.

  • Im trying to get ride of Alias but it keep making copy Now my trash is so big....How long it will take to empty the trash

    Im trying to get ride of Alias but it keep making copy Now my trash is so big....How long it will take to empty the trash

    That's not how it works. Once a device (including a computer) is associated with an Apple ID it cannot be switched for 90 days. See this Apple KB article for more information: http://support.apple.com/kb/HT1420.

  • How long it will take for apple to verify my info to get the new software for free?

    how long it will take for apple to verify my info to get the new software for free?
    i have submit my request since 6 hours, is that normal??

    from what i hear, it takes a minimum of 72 hours before you hear back from Apple.
    but because there are a lot of people are wanting to get their free upgrades, it might take even longer now.
    good luck - just be a little patient and your turn will come soon....

  • How long it will take to active a subscription

    Hi ! I have just activated my subscription for Singapore, how long it will take for me to access the calls? how to make a call to mobile or landline numbers ? 

    you can visit the link below for instructions on how to check the status of your current order;
    https://support.skype.com/en/faq/FA288/what-is-the-status-of-my-order
    if you need further assistance, you can also try to contact customer service. Just open the link pasted below to see the instructions on how to get in touch with customer service -
    https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

  • I have a jammed volume button and I was wondering how long it will take for my phone to be returned?

    Please answer quick and please tell me how long it will take in week days not buisness days and the max time it will take. Thanks sooo much.

    Hi,
    It will take time. I would suggest to create a Google Webmaster Account and submit your site to Google. Also, take a look to this article
    Check your site's search performance - Webmaster Tools Help
    Also check, How Google Search Works,
    http://www.google.co.in/insidesearch/howsearchworks/index.html

  • Batch monitor with Compressor 3 does not say how long compression will take?

    It seems to me that Batch Monitor no longer says how long compression will take.
    Am I missing something?

    I thought I had Compressor 4, but it's 3.

  • If processing 30000 by 700000 array how long labview will take?

    I was just wandering if i can use labview or not for the following as the last day is tuesday.
    i have 700000 locations' latitude,longitude.and i have 30000 other locations'latitude,longitude.
    now i will take one by one location from 30000 and want to find all the locations out of 700000 which are within the 20 miles radius of my location(which is one from the 30000).
    i dont want to compare distance between one point and all the other 700000. instead can we do this comparison for some lesser values. i mean just a look at all 700000 and it may be reduced without comparing each and every value. is it possible?
    if not then--- 
    I have made a distance calculator using formula node and it works with 100000.( i have tested) now if i make it to calculate for 700000 and that also 30000 times, how long will it take, anybody has any idea? here time is restriction.
    i am using labview 8.6 evaluation version.

    janki wrote:
    I was just wandering if i can use labview or not for the following as the last day is tuesday.
    Of course you can use LabVIEW!
    If the problem fits into the memory contraint of a 32 bit OS, LabVIEW is equally sutable as any other programming language.
    As Joseph already mentioned, deciding on a good internal data structure is important for speed and efficiency. Make sure to keep the large data structures "in place" and avoid constantly making data copies in memory. I assume you have an efficient algorithm to calculate the distance between two points given their long/lat coordinates.
    Why don't you start with a scaled down program containing small arrays of artificial data and work out the main algorithm. Feel free to post it here so we can discuss they layout possibly offer improvments. Good luck!
    LabVIEW Champion . Do more with less code and in less time .

  • How long it will take itunes connect to verify my Ein number?

    I did send the form with all the informations required about 6 day ago. But no answer by email back.

    from what i hear, it takes a minimum of 72 hours before you hear back from Apple.
    but because there are a lot of people are wanting to get their free upgrades, it might take even longer now.
    good luck - just be a little patient and your turn will come soon....

  • Where or How Can I Find a Viewer of my Download by Time, Percentage and KB so to know how long it will take

    I'm trying to Download mbam Malwarebytes-Anti-Malware, because of a lot of trouble getting my Browser to get things on the Internet. I want to clean up this stuff, but I need the Program. I go on Site and Hit the Download and then See Nothing. I don't know if I am getting the Download. How do I get and find a view to see that I am getting my Slow Pace (Phone Line Modem ) ... 3.40 KB's a second) is a long time knowing if my waiting is worth it, if I can't see the slow KB'S and MB'S being Downloaded or not. I want a Viewer on this and where do I find it? I already spent 6 Hours of Failure, because I don't know why the Downloading is Failing on Me. I can't see what is going On!

    I use the Download Statusbar add-on for exactly the reasons you are mentioning. See the demo here
    [http://youtu.be/BUDqWrJ-Vao Using Download Statusbar]
    To install the addon, see
    [[Find and install add-ons to add features to Firefox]]

  • Hi  all , how long  it will take for  one xi porject implementation

    hi all,
    i learned xi , i would like know , what will be the  time period for implementing one xi project , unlike r/3 implementation depends on various aspects like modules , organization..
    in xi projects what factors will be considered  .
    regards
    s reddy

    Hi,
    One of the largest XI3.0 Implementation I know about is having close to 400 interfaces in Europe for Utilities. If it that it would take minimum around 2years if 10 developers will develop. But we cannot exactly tell.
    So depending upon the interfaces, its robustness, its requirements it varies. So it may take from a mininum 3 months to a year also.
    All depends upon the client requirements.
    ---Satish

  • Any guess on how long it will take for HP to come up with laserjet printer drivers for LION?

    HP does not have the printer drivers available for the Mac OSX 10.7 (LION) for the HP Laserjet 2420/2430 series; which has been true for previous OSX releases also?  Just wondering if it's 1-3 months, or more before our printers can be expected to work again.  Is it long enough to just abandon LION for a while, and go back to SnowLepard?

    Since this is for an HP product support, you might want to visit their site:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=412123&prodTypeId=18972&prodSeriesId=416419&swLang=8&taskId=135&swEn vOID=4082
    They'll be able to estimate time of delivery better than Apple, who doesn't make HP drivers.

  • Re: Impossible to activate your iPhone, activation server temporarily unavailable.. how long it will take?

    hi there
    just update ios to try beta 6  to our test iphone 3gs  but we got the message
    Impossible to activate your iPhone, activation server temporarily unavailable..
    we try several times to activate it but nothing. we have the dev account and also the provis auth. any idea why this could happen ?
    thanks

    As you are running a beta you must be a developer. You will have to go to the Developer forums for help.
    I suspect there is nothing wrong with the activation server; more likely you hacked the phone to get the beta. Now you are stuck.

Maybe you are looking for