How long Q10 LED notification light keep flashing ?

My Q10 LED notification light will begin flashing when a Call , E-mail or any comes in, but after a about 15 minutes it stops flashing. My previous is 9700, its LED keep flashing until you read or checked at the notification. Because this helpfull when we wait for important e-mail or event you can E-mail come in after you leave your phone for a while. I have tried tap the top button for 30 second, I think it not the way and not work for me. So I am wondering, how long is the LED supposed to keep flashing on the Q10? and is this normal ?
Solved!
Go to Solution.

The LED on all BB devices has always timed out after about 15 minutes or so. I had the 9700 and it timed out for me, as well, so I'm not sure why you say it was any different on the 9700.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Notification light keeps flashing

I've a Nokia N8 and recently the notification light keeps flashing even though i have no messages or missed calls. It only flashes when i lock it and it's not the same flash as a message notification it's more softer. Anyone know how i can stop it or have any ideas why it's flashing?

In the notification settings turn standby breathing light off,this is just to let yet know your phone is on.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Blackberry LED light keeps flashing red

Yesterday Vodacom Care gave me a new Q5 device - i had a Q5 for 2 months and the phone just went dead - so they replaced it . Now my Q5 LED light keeps flashing red and it's a NEW PHONE ??? - make it stop please !

Hello,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps below to try and bring the BlackBerry Q5 back to life:
Ensure that BlackBerry Link is installed on the PC or Mac OS
Ensure the computer has an internet connection.
Launch the BlackBerry Link Software.
Note: A backup of the BlackBerry device should be tried before a reload.
Turn off the BlackBerry device. Make sure there are no flashing LEDs and that the LCD is not still being lit by the backlight. If there are any flashing LEDs, hold the power button for 15 seconds until the LEDs stop.
Connect the BlackBerry device to the computer.
When prompted with Cannot communicate with device, click Restore and then click yes allow the update to be downloaded and installed on the BlackBerry device.
If the restore button is not seen press the vertical dots in the lower right corner of BlackBerry Link and select disconnected device. Highlight the disconnected device you are working with and attempt steps 4 to 6 again.
If the issue still persists, then I suggest contacting your network service provider for repair options.
Let me know if you have any more questions.
Cheers.
VIA | ViciousFerret
http://supportforums.blackberry.com/t5/BlackBerry-Z10/BB-Z10-Died/m-p/2230087#M10125
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I have a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy

I have a iphone 5 and i can not figure out how to turn on the LED notification light. is this even possable? if not how do i know if i missed a call when i was not there to answer it visualy

If you were not there, how would you see the led?
Anyway missed calls will appear on your Lock screen under the Missed tab.
Or a small red numbered badge will appear on the Phone App icon when you have missed calls. You can then access the Recents Tab in the Phone App to see whcih calls were missed.
Missed Calls are shown in red there

Flip (8220) LED notification light duration and control problems

As I've read on the boards with regards to other models, the red LED notification light stops working after exactly 15 minutes. T-mobile customer service was unable to find a way to extend this so that it keeps flashing until I check the message. And so, after consulting the boards, I downloaded the BBAlerts app from handango. But the desktop Manager doesn't pick it up as a suitable app for my device.
Any suggestions?

This is a problem with all BB's! The message lights always revert back to green after a certain amount of time. It was one of my main complaints when I got the curve! I know it's stupid...it makes no sense but you have to complain to BB.

CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?

CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?

Settings>general>accessibility>led flash alerts off

How do I get the light to flash when a call comes in on my iphone?

How do I get the light to flash when a call comes in on my iphone?

Settings > General > Accessibility > LED Flash for Alerts ON.

Led notification lights

I have an 8300 Curve (T-Mobile) and am having trouble with the LED notification lights. When I have a message or call, it blinks red but only for a while. If I get a call at night when it is on silent, it is not blinking in the morning so I don't know I have messages unless I activate teh screen by clicking on the ball or other button. Anybody have a solution to this?
Thanks
Message Edited by dany_s on 04-24-2009 05:26 PM

Hi and welcome to the forums!
Try BB Alerts for extending the message notifications.
Thanks,
Bifocals
I didn't"t see it in Blackberry App World, so here is a link:
http://www.handango.com/catalog/ProductDetails.jsp?productId=199266
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

Hello Toby135
Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
-Norm G.

Phone died and I put it on the charger and the red light keeps flashing.

Phone died and I put it on the charger (wall charger) and the red light keeps flashing. It's been doing that for a little less than an hour, I pulled the batttery twice & get the same light flashing. I also read othe posts and it says to just let it charge for a few hours but i don't think it's gonna work. If you know anything about it let me know please & thank you.

When connected to the charger, is the "no battery" symbol showing?
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Actiontec GT701C DSL light keeps flashing please help

I use to have the WIFI router from verizon but the wifi range was not strong enough for certain items in my home... in addition the items could not even find the network on wifi. i replaced it with a Actiontec GT701C so i could use my old wireless router that was strong enough to support my whole home .. But know when i connect my DSL line to the New modem the GT701c i can not access the internet .. i Could get to the configure screen but other than that the DSL Light keeps flashing any suggestions.. i have rebooted the modem and tryed diffrent phone line and phone jacks in my home please help !!!

Does your older modem connect still? If so, could you tell us which modem it is so that we could help you obtain the Transceiver Statistics from it? It's possible the ActionTec could either be defective or it could be sensitive to noise on the line if the signal isn't the greatest.
========
The first to bring me 1Gbps Fiber for $30/m wins!

I need to know how to stop a notification that keeps coming up when playing a spades game, that keeps telling me to go to the game center. I even shut off the notifications in the settings, this is an anoying problem

I need to know how to stop a notification that keeps coming up when playing a spades game, that keeps telling me to go to the game center. I even shut off the notifications in the settings, this is an anoying problem

I'm pretty sure this is an Apple thing and you can't do anything about it. To get rid of the notification just do as it asks then try to forget about it.

How long is it save to keep notebook turned on

how long is it save to keep notebook turned on, not to worry about hardware failure?
i'va got g560 and courrious if i can keep it turned on for example 2 weeks, or where's the limit (if any)?
dont worry. i dont want to make notebook server, i'm just courious
Solved!
Go to Solution.

From my personal experience (with a Sony Vaio notebook which I still use), I (the end user) should be able to leave my laptop on for as long as I like and should not experience any hardware failure whatsoever. I have had my computers "on" (running with moderate use, idling, put to sleep mode then reawakened... basically it was never shut down or restarted) for weeks and months! Basically I have my full confidence for Sony brands; notebooks, cameras, TVs, what have you.
As for Lenovo, I think I should be able to treat it the same as how I treat my Sony. This is my first Lenovo purchase, which is a G560 as well, so only time will tell what it can handle. I have friends who have mainly Thinkpads and as far as I can tell, those are very durable. But I am fairly certain that engineering teams are of different levels skill and seniority wise when designing these two very different laptops for different end users. Hence, why I have already experienced issues with my G560 right out of the box. But hopefully they will all get resolved (this forum seems like a more helpful place than tech support fortunately or sadly depending on how you see it).

How Long Do I Need to Keep A Package If I Upgrade?

My alma mater's college basketball team is playing a game tomorrow that is only being shown in my area (ironically in Philly, the area where the school is based) on the YES network. To get the YES network would require ugrading 2 levels for FiOS TV at a monthly cost of $35, which is a lot of money. My question is if I upgrade, I assume I can downgrade back to the original package, but how long would I have to keep the new package before I could downgrade?

wildcat07 wrote:
My alma mater's college basketball team is playing a game tomorrow that is only being shown in my area (ironically in Philly, the area where the school is based) on the YES network. To get the YES network would require ugrading 2 levels for FiOS TV at a monthly cost of $35, which is a lot of money. My question is if I upgrade, I assume I can downgrade back to the original package, but how long would I have to keep the new package before I could downgrade?
You can in most circumstances downgrade after 24 hours once the new order/package kicks in.
You can do it online or call them to switch back. I've switched a few times during my contract. Only downfall with being under contract is they make you re-sign a contract each time you change packages and the contract gets renewed from that date.
If you arent under contract and want to remain that way then make sure they dont force you to sign one when upgrading or downgrading.

Light keeps flashing and cannot connect to ipad

The front light keeps flashing and there is no connection to my ipad - advice seems to be to restore but do I restore on the ipad - general settings and restore

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source List
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

How long Q10 LED notification light keep flashing ?

Similar Messages

Maybe you are looking for