How long should a search to Include Non-Indexed Files take??

Hello,
I left last night doing a search in Bridge and I said to include the non-indexed files ... it has been running over 12 hours???
Is this normal on a large server?
If I let it keep going, will it make all the future searches faster?
thanks!
babs

I just did a search of at least 14,000 files and it took less than 1 minute.
Hence my statement that Bridge (despite being a fabulous app for ingestion and sorting etc, all the work needed before the files are ready for distribution or publishing) it is lousy for use as a DAM (Digital Asset Management).
It is also not designed for use over a network as you already clearly stated.
To spoil your party a bit more, I just timed my search in my DAM application Canto Cumulus Single user edition. Having almost 60.000 keepers from the last 17 years in my digital archive a search took almost 2 seconds....
Yes it is not fair because Bridge comes (somewhat) for free with PS or other CS applications and Cumulus single user is around 300 $ I believe.
But there are some cheaper DAM applications. All those DAM apps are pretty lousy in the work Bridge is very good at. It is just trying to get the right tools for the job

Similar Messages

How long should the installation of new software for iphone take. Mine has been downloading now for over 3 hours. I don't want to disconnect and lose my data.

How long should it take to update an I 4 phone to the new system. Mine has been going for 3.5 hours and is not finished, but I don't want to disconnect and lose my data.

Mine took about an hour or so but it mostly depends on your modem and processor speeds. You can check the progress by clicking your iphone on the left and then checking the download progress. As long as that is moving I would just leave it and wait but don't let your computer shut down.

How long should the upgrade from iOS6 to iOS 8 take on an iPhone 5

Finally decided to upgrade my iPhone 5 from ios6??? to iOS 8 (which ever version is available today).
Backed up on iTunes first.
Launched upgrade from iTunes.
All seem fine until got a message that could not access phone because it was locked and should enter passcode to gain access.
Entered passcode and now on phone have progress bar which has not budged for about 3 hours. No longer see phone as device in iTunes.
Should I continue to be patient?

Unless you have a very slow Internet connection it should not take 3 hours. On my 50 Mbps connecting it takes 15 minutes. While the phone is updating it may disappear from iTunes; that part is normal. But not for 3 hours. Was the phone ever jailbroken?

How long should One hour of DV with TC gen take to export Ref file to deskt

DV footage in a DV timeline.
Only TC gen effect- which I believe is real time- (plays down fine without render)
Export QT ref (no movie self contained) takes 17 minutes??
Ever since I've gone to SL I have been having drop frame issues, long renders, etc.
what's up?
I have 16gigs, ATI 4870, Dual Quad, ect. Machine should be quick (and it was)
(SL was fresh install)
maybe back to leopard?

The TC gen effect is real time to play in real time, or in other words creating an hour's worth of the effect in an hour, but it can't create an hour's worth of it instantaneously when doing a qt ref export. That's what's taking 17 mins.
As for the SL issues. I don't know, are you on FCP7?

How long should sync-ing my playlists onto my nano take?

I have a pc running xp, I successfully loaded music onto my new nano once. Now, I've tried to sync again and the screen is blinking the sync symbol and displaying the message "do not disconnect." Is it frozen? Do I need to reset? It's been like this for about half an hour and I don't want to damage it by disobeying what it's telling me to do...I really need help. THANKS TONS

How long it takes depends entirely on how fast your computer is and how much your trying to sync. Dont dissconect, that could cause damage to your ipod. Just give it time, as long as the box at the top is doing something it still syncing, pressing the small arrow circle will show you how far its got and how many songs its done.

DFSR - This member is waiting for initial replication for replicated folder SYSVOL Share - How long should it take?

Yesterday we were forced to perform a non-authoritative sync of the SYSVOL folder as replication had stopped because one of the DCs had been disconnected from it's replication partner for more than 60 days (caused by a unexpected shutdown and we did not
pick up on the fact replication had stopped until now).
I performed the non-authoritative sync of the SYSVOL folder and now the folder is in state 2
ReplicatedFolderName ReplicationGroupName State
SYSVOL Share Domain System Volume 2
and has been for more than 12 hours. The DFS replication health report, reports "This member is waiting for initial replication for replicated folder SYSVOL Share".
How long should it take and is there anyway to force it so that replication can resume?

I'm fairly sure it's not tombstoned. Here is the DCDIAG output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = RC-CURDC-02
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Connectivity
......................... RC-CURDC-02 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Advertising
......................... RC-CURDC-02 passed test Advertising
Starting test: FrsEvent
......................... RC-CURDC-02 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... RC-CURDC-02 passed test DFSREvent
Starting test: SysVolCheck
......................... RC-CURDC-02 passed test SysVolCheck
Starting test: KccEvent
......................... RC-CURDC-02 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... RC-CURDC-02 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... RC-CURDC-02 passed test MachineAccount
Starting test: NCSecDesc
......................... RC-CURDC-02 passed test NCSecDesc
Starting test: NetLogons
......................... RC-CURDC-02 passed test NetLogons
Starting test: ObjectsReplicated
......................... RC-CURDC-02 passed test ObjectsReplicated
Starting test: Replications
......................... RC-CURDC-02 passed test Replications
Starting test: RidManager
......................... RC-CURDC-02 passed test RidManager
Starting test: Services
......................... RC-CURDC-02 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.96.64, is 83 percent full with only 7 IP addresses remaining.
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.98.0, is 95 percent full with only 5 IP addresses remaining.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.96.64 is 83 percent full with only 7 IP addresses available.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.98.0 is 95 percent full with only 5 IP addresses available.
A warning event occurred. EventID: 0x000016AF
Time Generated: 06/12/2014 18:39:43
Event String:
During the past 4.23 hours there have been 95 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined
sites and may connect to any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please
consider creating subnet object(s) covering the above IP addresses with mapping to one of the existing sites. The names and IP addresses of the clients in question have been logged on this computer in the following log file '%SystemRoot%\debug\netlogon.log'
and, potentially, in the log file '%SystemRoot%\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text
'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';
the default is 20000000 bytes. The current maximum size is 20000000 bytes. To set a different maximum size, create the above registry value and set the desired maximum size in bytes.
......................... RC-CURDC-02 passed test SystemLog
Starting test: VerifyReferences
......................... RC-CURDC-02 passed test VerifyReferences
Running partition tests on : curriculum
Starting test: CheckSDRefDom
......................... curriculum passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... curriculum passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : riddlesdown.local
Starting test: LocatorCheck
......................... riddlesdown.local passed test LocatorCheck
Starting test: Intersite
......................... riddlesdown.local passed test Intersite
Eveything is passing, except for the bits about the SystemLog and DFRS, all seems good to me.
Event 2213 is in the logs. I will look and changing the MaxOfflineTimeInDays and see if that gets it going.

How long should a deployment build run

I started the deployment utility and it reports
Building...
8:35 AM
The Build Status is
Processing VIs...
Press F1 for Help does not respond.
That was over 20 minutes ago and there is no disk activity. There are about 80 IVs. About how long should this take?
thanx,
jvh

This time when I killed the non responsive LV task another one sprang up then became non-responsive. When I killed it the build finished:
Making an installer, please wait...
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
Creating merged database...
Creating installer files...
Build complete successfully.
Copying additional setup files
Compressing installer files
Done building deployment
The installer is finished
The build process is done.
11:15 AM
Warning: You may need to add any sequence file(s) referenced by the following expression(s):
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
Warning: The following VI(s) have characters in their names that are not valid for VIs that are not within an LLB. These VIs have been copied from their source LLB into Illegalfilenames.llb instead of being copied as separate VIs into SupportVIs:
Not A Telnet Connection?.vi
HTTP Point In Polygon?.vi
HTTP Standalone?.vi
HTTP Show GWS?.vi
Not A Cookie?.vi
Warning: There is no relative path between the following files. You may need to add a path to your search directories.
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\Database\Database.seq
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\reportgen_xml.seq
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\modelsupport2.dll
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\ModelSupport.seq
From [Installation Directory]\TestStand\Avionics.seq to [TestStand]\Components\Models\TestStandModels\modelsupport2.dll
+++++++++++++++++++++++++++++++++++++++

How long should it take to get my old number back ...

I moved house 4 working days ago. New house is on same exchange as old, sa asked to keep my old number.
The order is apparently in two parts:
1) Cease line at old address - done on day "1"
2) Connect new line at new address - engineers "cancelled" on Day 1. No reasons given on the order and I wasn't contacted to tell me all had gone to a ball of chalk..... I'd have been none the wiser had I not bothered to check.
Over the weekend I spoke with various people, leading to a new order for a new line, to be installed on day "4" (today). It wasn't possible to pull my old number out of the allocatable pool (presumably (good!) it was still allocated to the cancelled order?) The engineers were "asked" in a note on the order to move my old number back onto the line.
This line is now up and running on a temporary number.
As my O2 broadband reconnection is waiting till I have a line with a stable number on it and I am keen to get it back asap, how long should I have to wait? Is there anything that could happen that will sabotage getting my number back and what should I do to prevent this?
Jon

I am with you on this and am very interested also as to the answer.
I was originally with BT, then moved to Sky as I wanted Sky TV, and thought it best to get the complete package. They never once mentioned, "oh by the way if you move home you lose your number". I think they should highlight this, and then watch there customer base drop.
Anyways, that aside. I have decided to come back to BT, and BT have created a new number at my new address, and when the line is activated I have to call to get a renumber and hope that the number I want hasn't been taken.
i presume by law Sky have to put the number back into the pool, and therefore should be able to get BT to get it back. Fingers crossed.
What reasons could there be that they cant get the number back.

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Ripping DVD's - How long should it take?

How long should it take to rip a whole DVD? PQDVD seems the easiest, but it rips at 1x speed (or close to it). Are there programs out there that do it faster? Are there programs that are cheaper? $35 is a lot of money.

I use DVD Decryptor (free) to rip the VCD files from the DVD.
I then use Videora for iPod to encode them to MP4.
Time for DVD Decrypt is about 15 minutes for a 2 hour movie.
Time for Videora is about an hour and a half for a 2 hour movie (give or take a half hour).
DVD Decryptor needs to be set to Not split the files based on size, and there is another tab that asks if you want to split the VCD files at all. Both set to none, find in the options screen.
Good luck!

I have been sent an email saying my podcast was accepted and will be up on iTunes in a few hours. That was 5 hours ago. How long should this process take?

I have been sent an email saying my podcast was accepted and will be up on iTunes in a few hours. That was 5 hours ago. How long should this process take?

There's no fixed time. If it's been accepted - presumably you've been given a URL? - it should appear reasonably soon. However it can dake some days before it turns up in the search results. The podcast image, if you have one, may also take some days to appear.

How long should it take a well-qualified server admin to migrate from Tiger to Lion...

How long should it take a well-qualified server admin to migrate from Tiger to Lion...
For a small company, if the Tiger server is running on a G4 Tower:
-Roughly 500GB in user files
-Data resides on old-school ATA drives
-OD Master - Kerberized
-AFP
-Mobile Homes
-DHCP
-DNS (for 2 domains)
-FTP
-iChat
-Mail (non SSL)
-NetBoot
-Print Server
-SWUPD
-VPN
-Hosting website using MySQL
-User & Computer Management
Considerations/Hurdles/Challenges:
-Tossing old G4 into garbage, upgrading Mini client to Snow Leopard, adding Lion iMac client to the LAN
-Fresh OS installs on the Mini and iMac
-Upgrading from CAT5 to CATE on the LAN (not it the walls - just loose cables)
-All new hardware must be sourced out (take some time to price compare)
-Must find a way to transfer data from ATA drives to SATA drives or Lion Server
-Company must not have any email downtime (MX Records to be modified on DNS Providers site)
-Servers hostname goes from "companyserver.company.com" to "server.company.com"
-ISP blocks some SMTP ports
-DNS Provider doesn't support TSL/SSL SMTP
-Implementing a switch into the network
-Implementing a new router (for firewall and NAT) from ISP
Upgrading to Lion Mini Server
-All the same services
-Using SSL
-Implementing Mobile Device Enrolment and Deployment
That should just about cover it. I'll add any other details/hurdles as they come to mind.
Can you guys give me your best guesstimate as to how many hours you think this job should take? I'd appreciate any feedback as to how long you guys think it'd take you to make this transition. I'm trying to plan, and we're going to be down-and-out, the boss NEEDS to know for how long.!
Thanks in advance guys!

It's about a gigabyte, so if you have a slow connection, it might take some time.
But - you shouldn't be getting the beach ball - that's a different thing.
Can you do open Activity Monitor, or is it stuck completely?

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

How long should ipad charge from dead state

How long should it take an ipad 2 to charge from a fully discharged state?

Using the wall charger, about 4 hours.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?

Guys,
How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?
I have an RVS-4000 and it sends me error message by email on errors. Yet I do not have any documentation on what these error messages mean. I asked these question last May and still have not received any answers.
I was told it had been forwarded to a engineer for creatation of this documentation in May. Here we are...
Do any of you agree we need this type of documentation on our Routers? I think it should have been created before these where sold and included with these Routers. Maybe if we all voted on it. Then It might still happen?
Please add you reply's to this. As it might help to get things moving...
Bruce

I created a track on my computer and added it to iTunes
iCloud only syncs and stores purchases from the iTunes Store.
"With iCloud, the music, movies, TV shows, and other iTunes content you’ve purchased are available to download to your devices".
Apple - iCloud - All your content on all your devices.

How long should a search to Include Non-Indexed Files take??

Similar Messages

Maybe you are looking for