How long should I leave my Hp pc on for?

hi i have an hp p7 1245 and i leave it on for about 12+ hours a day. is it safe to leave it on for 30 hours straight? 

Hi,
Actually many computer can run 24/24, non stop.  As long as you keep it cool, you can leave it running 30+ hours. It knows when it goes to sleep anyway.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How long should you leave your iPad 2 on for it's first charge

    how long you your iPad be on for it's first charge

    You don't have to charge it up to 100% on the first or every charge, nor run it down to empty everytime before you re-charge it. This page just recommends going through at least one charge cycle per month :
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • How long should I leave my iPhone in rice?

    My younger sister accidently spilled water on my iphone 4. It seemed okay but it kept trying to turn itself off so I put it in rice and its been in there for about 3 days now. How long should I leave it in there to insure that it will be OK?

    you can't be sure if it's ok
    But three days should do the trick. Good luck

  • How long should I leave DLM so I can swap over mod...

    My connection is currently still recovering from a fault, one it has reached its maximum sync and becomes stable again how long should I leave the connection alone for? I want to put my own modem back on my setup. Thanks

    Yeah, see that here - quick to lower, s l o w to raise
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • How long should I leave the iPod to charge before using/activation

    How long should I leave my new IPod to charge before I activate/use it?
    Help!!!

    Doesn't matter

  • How long should I let my Iphone 5 charge for the first time?

    How long should I let my Iphone 5 charge for the first time?

    nokhodi wrote:
    How long should I let my Iphone 5 charge for the first time?
    Till it reaches 100%  >  See here  >  http://support.apple.com/kb/HT1476
    More Info here  >  http://www.apple.com/batteries/iphone.html
    From the above link...
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • HT4859 How long should it take to back up iphone for the first time with about 6 gigs?

    How long should it take to back up iphone for the first time with about 6 gigs?

    Welcome to the Apple Community.
    The first back up to iCloud may take some considerable time. Just how long isn't really possible to say without knowing how much is in your back up and your connection speed.
    What many people don't realise is that upload speeds are often significantly less than download speeds, so for example a user may have a download speed of 40 Mbps, but only 1 Mbps for uploading. As a rough guide it will take around 2 ¼ hours to upload 1 GB of data at 1 Mbps.

  • How long should my ipod touch stay in rice for?

    i left my ipod in my hoodie when it got washed and it still works how long should i put it into rice for?

    I would leave it in for a week and periodically change the rice.

  • How long should I leave on?

    If I'm downloading files which are going to take days, is it safe to leave my Powerbook G4 on, while on charge? What's the longest this should be left on?
    Many thanks
    L.Dudley

    It's perfectly safe to leave your Powerbook on indefinitely, provided that it's connected to AC power, and it's given plenty of airspace around and particularly underneath it to enable it to cool itself as needed.
    What sort of download are you embarking on, that's going to take several days? If I were you, I'd certainly look for an alternate way of obtaining the file(s) rather than expect my internet connection to hold up without interruption for that long.

  • How long should migration assistant take to inspect computer for files to transfer

    just purchased a mac book pro. I'm attempting to migrate my pc files to the mac. I've successfully installed migration assistant on my pc.
    Migration assistant on the mac has been " inspecting your computer" for over 12 hours. Is this normal? I'm hesitant to turn it off in case it will finish eventually

    If you mean it's been fifteen minutes and nothing has happened then most likely it's stuck. What are you migrating from and to?
    How to use Migration Assistant to transfer files from another Mac

  • How long should a new battery last when installed for a mac book pro 2009 with only a web browser opened?

    I recently went to the apple store in Covent garden and had a battery replaced for my Mac Book Pro 2009 edition. 
    After fully charging the mac the percentage guage meter displays the battery is losing power fast. 1% increments goes down every 5 minutes even if I have only a browser which is opened and no other running applications. 
    My recent test after a fully charged mac book pro allowed me a maximum use time is 2 hours! 
    I have friends and family members who have the same model as me and their mac book when running on battery, shows that the laptop has about 6 hours use.  They are able to run multiple applications and use sites such as Youtube and still get a good 4 hours of use.
    Anyway, I have booked an appointment with a Mac Genius for tomorrow to look into this issue. 
    I thought I'd just ask the community to find out if any of you can help.
    Many thanks in advance.

    Thank you Donald.
    You are the second person to tell me this so this is more of a reason for Apple to sort out issue for me.
    The team there don't believe there is an issue with the battery.
    Thank you once again.

  • How long should Asset encoding take?

    I am burning a DVD of a one hour soccer game. The asset encoding process sure seems to take forever. I am well over two hours of encoding.

    Hi - I'm trying to burn a 1hr 5min movie to iDVD from iMovie 4 using my G4 PB with 1.33 GHz and 768mb DDR SDRAM - I've got about 32GB free on my hard drive, but the movie is taking forever to finish 'asset encoding'. It's been doing it for about 24 hours now! There is a lot of different music files and transitions used throughout the film, but has this happened to anyone else? I'm not even sure if I should be leaving my Powerbook on for this long. Any help / suggestions would be greatly appreciated and how long should I leave it before I give up!?! (I can still use other programs - the whole thing doesn't seemed to have crashed)
    Thanks, Paul

  • How long should it take for a new vault to be created?

    I have a late 2009 27" iMac i7 with 16GB of RAM. I use referenced masters. The masters are located on a Drobo connected with FW 800. The internal drive on the iMac is a 1TB drive. The Aperture library is located on that drive and is 158.39 GB. I have about 110,000 master images. Most of them are RAW files shot with a succession of Nikon bodies (D100, D200, D300, and D400). I am in the process of moving a vault off of the Drobo and onto another external hard drive. I started the vault creation on Friday morning (3 days, 6 hours ago) and Aperture shows that it is still working on it.
    I have read the germane threads and have given it over three days now to complete. There is very little, if any, progress on the visual indicator that the task is nearing completion. It shows the job as about halfway done. However, Aperture still shows as responding in the Force Quit menu. Aperture is currently using up 11.2 GB of available RAM. Normally, I don't have any memory swaps. Now, page ins are 13,418,681, page outs are 7,226,523, and swaps are at 43.70 GB. CPU utilization shows Aperture consistently at about 170% of capacity.
    I really don't want to force quit Aperture for fear of what state it might leave my database. On the other hand, I need my machine and I can't use it until this process finishes or I force quit it.
    How do I know if Aperture is actually doing something or is it stuck in an infinite loop? What are the repercussions of doing a force quit? How long should I wait to see if it will actually finish on its own accord?
    Any insights, comments, or solutions would be greatly appreciated.
    Rick

    Rick-
    You are not being ignored. I for one just do not know what to say because it depends on how badly you need the use of the Mac and how at-risk your data are. One thought would be to just use the Mac (letting Aperture page out while other apps use the RAM) but that is a risk if the RAM is frozen for some reason. It does sound like you may have a memory leak.
    HollidayPhotography wrote:
    iMac i7 with 16GB of RAM. I use referenced masters. The internal drive on the iMac is a 1TB drive... ...I am in the process of moving a vault off of the Drobo and onto another external hard drive.
    What I do not understand is what you mean by "moving a vault off the Drobo." I would think that if you are making a new Vault that would involve the internal drive and the new drive, no major interaction with the very slow Drobo except to point to Masters there (I could be wrong).
    Also could some of your files be managed on the Drobo rather than referenced?
    -Allen

  • HT3053 How long should I charged new battery in MacBook pro?

    How long should I charged new battery in MacBook pro?

    You can leave it plugged in all the time if you wish.
    Once your Macbook is fully charged, it stops charging.
    You can see this if you click on your apple logo, about this mac, more info, system report, power.
    In any event, it is also a good idea to use your Macbook under it's own power to keep the battery in optimal condition.
    As much as possible, try not to fully discharge your battery.  It could do more harm than good to your Macbook.
    Good luck and enjoy your macbook

  • How long should the installation of new software for iphone take.  Mine has been downloading now for over 3 hours.  I don't want to disconnect and lose my data.

    How long should it take to update an I 4 phone to the new system.  Mine has been going for 3.5 hours and is not finished, but I don't want to disconnect and lose my data.

    Mine took about an hour or so but it mostly depends on your modem and processor speeds. You can check the progress by clicking your iphone on the left and then checking the download progress. As long as that is moving I would just leave it and wait but don't let your computer shut down.

Maybe you are looking for

  • Simple Problem with Stacked Canvas, I hope

    Hello all, I am become a bit frustrated with what I thought would be a simple form development solution. I am trying to create a form with a stacked canvas that will display about 20 fields that can be scrolled through. This is the detail Total of 25

  • HT203254 NVIDIA failure

    It appears that my Macbook Pro was manufactured in august 2007. Serial number: W87340ZAX91 I bought it on e-bay in april 2011. The original receipt was thrown away when normal warranty expired, nobody was aware at the time of the NVIDIA issue to come

  • Error loading web page

    Not sure if this is the place for this, but I'll take whatever I can get Am trying to open a web page that opens on a desktop unit www.ngs.noaa.gov/UFCORS/UFCORS2.jsp When I try to open in my laptop, I get: Error page UFCORS2 An error occured in the

  • I tried transferring my songs from an old computer to a new one.

    I transfered the files and downloaded the latest edition of itunes. Here are the problems: 1. I do not have any playlists, or any other information.  Is there another file I should transfer. 2. When I put a disc burned on the old computer in the new

  • Internal fanskeep running. How do I stop this?

    I have had trouble with Safari stop working then desktop freezes. I can still move mouse but nothing can be actioned. I switched  iMac off while keeping power button held in. Unplugged power cable at back of monitor, then kept power button held in. I