How long should it take my iPad to charge

How long should it take my iPad to charge?

What model iPad? 1,2,3,4 or mini? When you ask a question, you need to provide enough info to answer.
I assume you mean from near 0% to 100%.
Depending on the model, it takes 3 to about 8 hours.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

  • When my iphone 4s goes completely dead how long should it take to recognize the charger and begin to charge?

    when my iphone 4s goes completely dead how long should it take to recongize the charger and begin to charge?

    How do you know it is not charging? Do you see anything on the screen at all? Have you tried a reset? Hold the sleep/wake and home buttons until you see the Apple logo and then release. If the phone was completly dead, it may take up to 15 seconds or more for the Apple logo to appear.

  • HT1414 how long should it take to reset ipad mini?

    how long should it take to reset ipad mini? i'm going on 8hrs nothing yet.

    A reset using the Sleep and Home button will take approximately 2 to 3 minutes.

  • TS4062 How long should it take to set up my ipad using itunes?

    How long should it take to set up my ipad using itunes? Everything went blank on my iPad and I am attempting set it up using itunes. It has been connected for 45 min and gives me a set up incomplete message if I attempt to exit.

    I did some check on available sources on the topic and it seems that the app data is often causing a slow backup:
    What causes the slow backup?
    It’s the Apps! Apps on the iPad might store data to work properly. Some do store a lot, some don’t. For instance a game saves some highscore data (not very much), where a newspaper App or a rss reader might save updated data (can be very much). I believe lots of iPhone users, that experiencing slow backups, have problems with one or many Apps that are leaking in terms of saving tons of tiny files to the iPhone, especially when they have a lot of Apps and when they did backups cross devices (i.e. iPhone 2G to iPhone 3GS).
    The article on this website http://apdevblog.com/slow-itunes-sync-backup/ should provide more information and hopefully a fix for your issue!

  • How long should it take to rest the settings i have done mine and it is still going after 1 hour it is just on the apple screen

    how long should it take to rest the settings i have done mine and it is still going after 1 hour it is just on the apple screen

    Hey Beck,
    Welcome to Apple Support Communities.
    It sounds like you’ve Reset All Settings on your iPhone 4s and now you’re running into an issue where the device only displays an Apple logo on startup. The article linked below provides troubleshooting suggestions that should be able to help you resolve the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support.
    Ciao,
    -Jason

  • HT4623 Approximately how long should it take to update the iOS 7.0.2.....?  So far it has taken over 8 hours and the bar is still not half way.

    Approximately how long should it take to update the iOS 7.0.2....?  So far it has been over 8 hours and the bar is not even half way....

    Something have gone wrong somewhere.
    Try and reset your iPad.
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • HT4060 How long should it take to charge battery when it is all the way down? (I Pad 3)

    How long should it take to charge I Pad 3 when the battery is all the way down?

    That depends on a number of things, but using the power adapter plugged into a wall socket it takes my iPad 3 about 5 hours to fully recharge.

  • How long should it take for 42 pictures to "finish download"

    how long should it take to "finish download" for 42 less than 12 mb pictures to my iMac from my iPad?

    mcziggy,
    What model iMac do you have, please. Is it iMac 7,1 or later?

  • HT1766 How long should it take for a icloud back up of about 6.4GB?  It has been running all night and not complete.

    How long should it take for an icloud backup of about 6.4GB?  I selected a manual backup and it has been running all night?  Thanks         

    That's going to depend alot on your internet connection speed. 6.4 GB is alot of data, especially if your connection speed is slow (DSL) or low-end cable speeds of ~1.5 Mbps.

  • How long should it take to restore icloud back up to an iphone 5comments, how long should it take to restore icloud back up to an iphone 5comments

    How long should it take it to back up icloud to iphone 5c?

    The answer depends on the amount of data to be restored, the speed of your Internet connection, and wireless network conditions. It could take the better part of a day.

  • I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

    I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

    Triple-click anywhere in the line below to select it:
    tmutil compare -E
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • How long should it take to download Mountain Lion?

    How long should it take to download and install Mountain Lion?  I have been downloading it for about 5 hours and it still has 1 gig to go.  My current OS X is 10.7.4

    It depends on what bottlenecks you have interposed.
    If you have a fast Ethernet connection, not cable Internet, that is not throttled by your ISP, and are using fast Ethernet on your local network, you should be able to download in about an hour.
    If you are transmitting it over your wireless connection, it may take substantially longer.

  • HT201376 I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

    I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

    About all you can do is wait until it finishes or you get an error message.

  • HT4718 am trying to install OS X Lion for the first time. So far it has been downloading for about 2 hours. How long should it take?

    Can anyone help please?
    Lion download to iMac has been running for about 2 hours and is still not halfway yet. How long should it take? should I cancel and start again?

    1500Kbs is 1.5Mbs. That is Kilo bits per second. There are 8 bits to a byte so if you divide 1500 (or 1,500,000) by 8 you get 187500 bytes a second. Divide 3.5GBs (3,500,000,000), that capitol B is for Bytes, by that 187500 you get 18666.666 seconds. Which needs to be divided by 60 to get the minutes and then again by 60 to get the hours.
    5.1851xxx hours.
    I use to have a 3Mbs DSL connection and it took me over 3 hours to download Lion. Now that I have a 19Mbs Cable connection it take about an hour to download and install.
    So wait it will happen eventually. If you cancel and start again your are still going to wait 5+ hours.

  • Ripping DVD's - How long should it take?

    How long should it take to rip a whole DVD? PQDVD seems the easiest, but it rips at 1x speed (or close to it). Are there programs out there that do it faster? Are there programs that are cheaper? $35 is a lot of money.

    I use DVD Decryptor (free) to rip the VCD files from the DVD.
    I then use Videora for iPod to encode them to MP4.
    Time for DVD Decrypt is about 15 minutes for a 2 hour movie.
    Time for Videora is about an hour and a half for a 2 hour movie (give or take a half hour).
    DVD Decryptor needs to be set to Not split the files based on size, and there is another tab that asks if you want to split the VCD files at all. Both set to none, find in the options screen.
    Good luck!

Maybe you are looking for

  • Report format (htmlcss) from Form

    I can't seem to get the report to run as htmlcss from a form. Here is a code snipet: runformat := 'htmlcss'; SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,runformat); :global.reporthandle := RUN_REPORT_OBJECT(repid); I have also tried RUN_PRODUCT

  • SD ABAP Questions for functional

    Hi People,                    Can some body please help out about how much of the ABAP is expected to be known by a SAP SD functional consultant?Please list some usual  questions asked to SD functional regarding ABAP?

  • Photoshop CS6 plante avec Liquify et refuse la rotation

    Bonjours, J'ai remarquer que mon Photoshop plantait lorsque j'utilisais le filtre Liquify (fluidite) Et aussi, malgrer le faite d'avoir activer l'openGL dans mes preference, Photoshop m'affiche un message d'erreur lorsque je veux utiliser l'outil rot

  • SRM5.0 with Backend ECC6.0

    Hi experts, We actually have SRM5.0 / SAPKIBKT08 with Backendsystem Enterprise 4.7 and are upgrading to Backendsystem ECC6.0 In SRM-Customizing 'Define Backendsystem' I should change the Sys.Type accordingly but there is no entry possible for ECC6.0.

  • Wifi says connected but can't connect to internet, email etc

    my ipad wifi says it's connected but can't get internet, email etc.