How long should it take too boot from cd?

Hello. I bought a new 1TB hard drive for my mid 2010 MacBook Pro and I wanted to get it up and running. It's currently in the computer installed, I've inserted my installation disk, but how long should it take for it to load? I tried letting it sit and load for about 2 hours but I got impatient and shut it off. I'm going to try to see if I see any changes if I let it sit over night. Right now, the grey apple is on the screen with the spinning gradient pinwheel. But on average, how long should it take? I also read that I should have my macbook plugged to my internet connection, so that's on there as well.

How were you booting from the DVD drive? Did you hold down the C key at startup? Try holding down the Option key to get a Boot Selection screen, Wait 30+ seconds for the DVD disc to show up and select it to boot from.
If when using the Option key you never get the install DVD disc showing up or after selecting it to boot from the system just sits there for any length of time, over 2 minutes, then your Supredrive is not reading it. This is a very common problem with the Supredrives. They seem to work for some things and not for others or they just fail out of the blue.
I suggest you go out and buy any brand External DVD drive that connect by USB port (That is Except the Apple USB External Superdrive as they won'r work on your model Mac notebook) and try booting the install DVD from that external DVD drive.
Abcdefghijayjay wrote:
I was booting directly from the DVD but it didn't even go through. I let it sit over night thinking it would finish.

Similar Messages

How long should it take to recover from a invalid feed?

I posted the 2nd edition of my Podcast Sunday night, the 16th, at about 9:30 P.M. local time. Unfortunately, I'd just updated my version of podPress, a WordPress plug-in that handles publishing Podcasts for me, and I'd failed to read the directions properly, which led to an invalid feed which, in turn, led to iTunes ignoring it.
I corrected the problem at 12:47 A.M. on Tuesday the 18th and have pinged iTunes several times since then, but after nearly 48 hours, iTunes still only displays the 1 episode.
Is there anyone at Apple who might have pity on me and see that the Podcast gets updated soon? If not, how much longer should I have to wait? I'm losing listeners, I fear.
AMD Athlon 64 Windows XP Pro

Here it is, 4 days later, and my Podcast still hasn't been updated!

How long should it take a well-qualified server admin to migrate from Tiger to Lion...

How long should it take a well-qualified server admin to migrate from Tiger to Lion...
For a small company, if the Tiger server is running on a G4 Tower:
-Roughly 500GB in user files
-Data resides on old-school ATA drives
-OD Master - Kerberized
-AFP
-Mobile Homes
-DHCP
-DNS (for 2 domains)
-FTP
-iChat
-Mail (non SSL)
-NetBoot
-Print Server
-SWUPD
-VPN
-Hosting website using MySQL
-User & Computer Management
Considerations/Hurdles/Challenges:
-Tossing old G4 into garbage, upgrading Mini client to Snow Leopard, adding Lion iMac client to the LAN
-Fresh OS installs on the Mini and iMac
-Upgrading from CAT5 to CATE on the LAN (not it the walls - just loose cables)
-All new hardware must be sourced out (take some time to price compare)
-Must find a way to transfer data from ATA drives to SATA drives or Lion Server
-Company must not have any email downtime (MX Records to be modified on DNS Providers site)
-Servers hostname goes from "companyserver.company.com" to "server.company.com"
-ISP blocks some SMTP ports
-DNS Provider doesn't support TSL/SSL SMTP
-Implementing a switch into the network
-Implementing a new router (for firewall and NAT) from ISP
Upgrading to Lion Mini Server
-All the same services
-Using SSL
-Implementing Mobile Device Enrolment and Deployment
That should just about cover it. I'll add any other details/hurdles as they come to mind.
Can you guys give me your best guesstimate as to how many hours you think this job should take? I'd appreciate any feedback as to how long you guys think it'd take you to make this transition. I'm trying to plan, and we're going to be down-and-out, the boss NEEDS to know for how long.!
Thanks in advance guys!

It's about a gigabyte, so if you have a slow connection, it might take some time.
But - you shouldn't be getting the beach ball - that's a different thing.
Can you do open Activity Monitor, or is it stuck completely?

How long should it take to transfer information from hard drive to MacBook Pro after resetting

how long should it take to transfer information from my hard drive to my Mac Pro after it has been reset

There is no answer to that. The time depends on the amount of data and the method used for transfer.
Barry

HT1766 How long should it take to restore new iPhone backup from iCloud?

How long should it take to restore new 4s iPhone backup from iCloud?

That depends mostly on your Internet connection download speed, and how much data you have on the phone. It could take anything from a few minutes to several days. There is no "one size fits all" answer.

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Ripping DVD's - How long should it take?

How long should it take to rip a whole DVD? PQDVD seems the easiest, but it rips at 1x speed (or close to it). Are there programs out there that do it faster? Are there programs that are cheaper? $35 is a lot of money.

I use DVD Decryptor (free) to rip the VCD files from the DVD.
I then use Videora for iPod to encode them to MP4.
Time for DVD Decrypt is about 15 minutes for a 2 hour movie.
Time for Videora is about an hour and a half for a 2 hour movie (give or take a half hour).
DVD Decryptor needs to be set to Not split the files based on size, and there is another tab that asks if you want to split the VCD files at all. Both set to none, find in the options screen.
Good luck!

Downloaded and installed os x yosemite and now mac book pro will not restart? How long should this take? Is there something wrong? Please helpthanks in advance

MAc book pro. I have downloaded and installed os x yosemite now mac book pro will not start? How long should it take? Is there something wrong?

The 2 computers here took about 45 minutes to an hour each.
The best thing to do is give it more time. If it gets too ridiculous, shutdown using the power button and then restart. Check  menu/About This Mac to see if it is installed.

DFSR - This member is waiting for initial replication for replicated folder SYSVOL Share - How long should it take?

Yesterday we were forced to perform a non-authoritative sync of the SYSVOL folder as replication had stopped because one of the DCs had been disconnected from it's replication partner for more than 60 days (caused by a unexpected shutdown and we did not
pick up on the fact replication had stopped until now).
I performed the non-authoritative sync of the SYSVOL folder and now the folder is in state 2
ReplicatedFolderName ReplicationGroupName State
SYSVOL Share Domain System Volume 2
and has been for more than 12 hours. The DFS replication health report, reports "This member is waiting for initial replication for replicated folder SYSVOL Share".
How long should it take and is there anyway to force it so that replication can resume?

I'm fairly sure it's not tombstoned. Here is the DCDIAG output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = RC-CURDC-02
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Connectivity
......................... RC-CURDC-02 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Advertising
......................... RC-CURDC-02 passed test Advertising
Starting test: FrsEvent
......................... RC-CURDC-02 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... RC-CURDC-02 passed test DFSREvent
Starting test: SysVolCheck
......................... RC-CURDC-02 passed test SysVolCheck
Starting test: KccEvent
......................... RC-CURDC-02 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... RC-CURDC-02 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... RC-CURDC-02 passed test MachineAccount
Starting test: NCSecDesc
......................... RC-CURDC-02 passed test NCSecDesc
Starting test: NetLogons
......................... RC-CURDC-02 passed test NetLogons
Starting test: ObjectsReplicated
......................... RC-CURDC-02 passed test ObjectsReplicated
Starting test: Replications
......................... RC-CURDC-02 passed test Replications
Starting test: RidManager
......................... RC-CURDC-02 passed test RidManager
Starting test: Services
......................... RC-CURDC-02 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.96.64, is 83 percent full with only 7 IP addresses remaining.
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.98.0, is 95 percent full with only 5 IP addresses remaining.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.96.64 is 83 percent full with only 7 IP addresses available.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.98.0 is 95 percent full with only 5 IP addresses available.
A warning event occurred. EventID: 0x000016AF
Time Generated: 06/12/2014 18:39:43
Event String:
During the past 4.23 hours there have been 95 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined
sites and may connect to any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please
consider creating subnet object(s) covering the above IP addresses with mapping to one of the existing sites. The names and IP addresses of the clients in question have been logged on this computer in the following log file '%SystemRoot%\debug\netlogon.log'
and, potentially, in the log file '%SystemRoot%\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text
'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';
the default is 20000000 bytes. The current maximum size is 20000000 bytes. To set a different maximum size, create the above registry value and set the desired maximum size in bytes.
......................... RC-CURDC-02 passed test SystemLog
Starting test: VerifyReferences
......................... RC-CURDC-02 passed test VerifyReferences
Running partition tests on : curriculum
Starting test: CheckSDRefDom
......................... curriculum passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... curriculum passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : riddlesdown.local
Starting test: LocatorCheck
......................... riddlesdown.local passed test LocatorCheck
Starting test: Intersite
......................... riddlesdown.local passed test Intersite
Eveything is passing, except for the bits about the SystemLog and DFRS, all seems good to me.
Event 2213 is in the logs. I will look and changing the MaxOfflineTimeInDays and see if that gets it going.

How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?

Guys,
How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?
I have an RVS-4000 and it sends me error message by email on errors. Yet I do not have any documentation on what these error messages mean. I asked these question last May and still have not received any answers.
I was told it had been forwarded to a engineer for creatation of this documentation in May. Here we are...
Do any of you agree we need this type of documentation on our Routers? I think it should have been created before these where sold and included with these Routers. Maybe if we all voted on it. Then It might still happen?
Please add you reply's to this. As it might help to get things moving...
Bruce

I created a track on my computer and added it to iTunes
iCloud only syncs and stores purchases from the iTunes Store.
"With iCloud, the music, movies, TV shows, and other iTunes content you’ve purchased are available to download to your devices".
Apple - iCloud - All your content on all your devices.

Asset encoding has been showing for almost 12 hours now. How long should it take?

How long should it take to burn a 27 minute movie. It states that it is encoding video with 1 minute left. Has been that way for 9 hours now.Any suggestions?

Hi
Encoding time depends on several things (mosty common are)
• Free Space on Start-Up (Mac OS) get's low eg less than 5Gb - and encoding time get's stupidly long
I never go under 25Gb free spae
• What You feed iDVD. Some Codecs/Fileformats just get's encoded stright of - but others needs to be converted first (re-coded) by iDVD first - can also take eons of time.
So Please tell where Your material came from and in what Codec/File format
• What Mac was Used to encode. My Mac G3 600MHz - took about 30 hours per hour movie. My dG5 2GHz was close to 1:1 - My new MacBook Pro 2.2GHz i7 - Have not tried yet - May be even faster ?
Yours Bengt W

How long should CHKDSK take ?

Hi
I have XP installed on Parallels (not Boot Camp) and it crashes frequently.
When I restart XP it wants to run CHKDSK. When I allow it it quickly gets up to a percent complete (say 18% or 31% but no higher) then just stays there for hours and never seems to complete.
How long should it take ? If I check Activity Monitor then Parallel's CPU usage is low but variable so it seems to be doing something...
Should I just leave it to run all night maybe ?
Thanks

DU doesn't have any support I know of for mapping out sectors. Either the drive will, or you can scan media using TechTool Pro. Speedtools has two programs, one to test media, and another that can auto assign new blocks, or attempt to force the drive to do so. It also has an indepth SMART test which can take about 45 minutes for a drive.
Even SoftRAID I don't think does but will alert if there is an I/O write error (and if anyone was going to, SoftRAID would).
Disk Warrior will write to system log and you can see if there are any used spares, how many left which a Google study found to be a good indicator of a failing drive.
Bad sectors that are used by partition tables require reformatting. DU does test non-user hidden partition table blocks, which is what may happen when DU fails to partition a drive. SoftRAID also tests the first and last 100 sectors, and you can begin and safely stop a zero-all of a drive before creating partitions.
Most of the time, you have to use the zero-all in DU or the more thorough 7-way write-erase to (hopefully) map out bad blocks. Say if TechTool Pro discovers bad media, which of course means losing all data, which is why I own Speedtools.
Chkdsk which does have the option, if you enable it, to map out bad sectors. Something you can't do normally with OS X. Which is one feature of Windows we seem to lack.

Restore Ipod? How Long Should This Take?

I received my replacement iPod back from Apple this afternoon. As a Windows 2000 user, I followed the instructions provided to reset the iPod for Windows. Namely to install the latest updater, restart PC, run updater... connect iPod and select Restore when the box became available.
The message then popped up saying Your iPod has been restored to factory settings and is restarting. Please leave the iPod connected and wait while it completes the restore process.
Just how long should this take? I hit restore at 14:15pm UK time, it's now 22:15 and it's still sat there with the same message, iPod blinking Do Not Disconnect and seemingly nothing else happening. Should it be restarted by now?
If it helps, am running Win 2000 SP4, used iPod updater 11-17-05, PC has 192mb RAM and is PIII 600Mhz.
Any help/advice greatly appreciated!

Thanks!
I clicked the X. It told me application couldn't be cancelled. Shut down PC anyway. Disconnected iPod. Apple logo shows up. Battery charger image shows, so I connected it to the mains charger... it sat there, thought about it and told me it was fully charged! Is now sat here quite happily accepting tunes from my iTunes library!
Thanks ever so much for the help, really appreciate it! Going to work tomorrow will seem more worthwhile having music to listen to!

HT1476 How long should it take to charge an iphone 5s?

My new iphone 5s has been on charge for 5 hours and it is not half charged yet. How long should it take to charge?

That's not really true. Open apps, except for the one you are actively using, use no power. They are in a suspended state. And killing apps in the Quick Launch screen does not necessarily stop ones with background processes from using power.
What you should be using the Quick Launch screen for is to switch quickly between applications without having to go back to the Home screen and navigating to the app you want every time.

HT1414 How long should it take to backup an iphone?

How long should it take to backup an iphone?

That's not really true. Open apps, except for the one you are actively using, use no power. They are in a suspended state. And killing apps in the Quick Launch screen does not necessarily stop ones with background processes from using power.
What you should be using the Quick Launch screen for is to switch quickly between applications without having to go back to the Home screen and navigating to the app you want every time.

How long should it take too boot from cd?

Similar Messages

Maybe you are looking for