How long should loading iOS8 on an iPad4 take?

Started last night and it said 42 hours and has been "loading" now down to 30 hours, about 1/3 thru. I use a slow DSL connection but never had this long for an update. I'm loading via iTunes on my computer.

Hhi it should take 40 mins for download
always download over Wifi not pc
is your internet very slow?
bsydd uk

Similar Messages

HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

How long should installing iTunes 10.5.2 take?

How long should installing iTunes 10.5.2 take?

a few minutes at the most. Depending on your mac and internet connection it could vary.

HT202159 how long should an upgrade to Mountain Lion take? Our original download was interrupted by power outage and now seems to be taking forever.

How long should an upgrade to Mountain Lion take? Our original download was interrupted by power outage, it seems to be taking forever.

Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery.

How long should Loading Installation Information take with a formatted Drive?

The OS was corrupted when installed over an incompatible 10.6 version of Centrify. It should have been uninstalled prior to installing Lion, so I was hoping to do a fresh install without restoring anything related to older applications to sort out network hang conditions. Restoring from Time Machine does not appear to offer selective restore in terms of Apps and Users.
I am now waiting for more than hour at a window over the prompt "To set up the installation of Mac OS X 10.7, click Continue" that says:
To download and restore Mac OS X, your computer's eligibility will be verified with Apple. This just has a throbber spinning in front of the message
Loading Installation Information... " I have about 16mbit/sec Internet connectivity, how long should this phase of the reinstall operation take?
When I first installed Lion, a bootable image of the initial version of Lion was made that was able to restore Lion to an erased drive in about 28 minutes. It seems that image has been disabled by changes the MacBook boot flash. Is there a way to be better prepared, and how long should this process take starting with an erased drive?

Sorry to hear that saga. This time download another Lion installer from MAS by going to purchases and holding the option key. When downloaded it will appear in /Applications. Save it off to several different places on your disk and off.
Also, consider keeping bootable clones with SuperDuper or CarbonCopy Cloner.
That way if you have a problem, just boot up from the clone and keep on working until you're ready to fix.

HT204655 how long should the update and subsequent uploading take (to start)?

I am trying to upload my photos to photo (icloud) from my old macbook pro (2010) and it has been over 24 hours since i started and it is still showing 'updating...'?
How long should this take? I have tried the usual - restart photo; restart mac; turn off and on icloud upload.
the file is about 9000 iphone photos and 100 short videos.
Thanks for any help.
J

How long is a piece of string?
Essentially it should not take too long (in my experience 20 minutes max from start to finish) although there are many, many factors that can affect the time taken to download and install the upgrade. Namely the reliability of your broadband connection, reliability of your router/firewall; reliability of the wireless connection (assuming you connect to your router wirelessly); downstream bandwidth supplied to your location by your ISP; the 'health' of your iMac; how much disk space for example? This is not an exhaustive list by any means.
If it's any help I would try the wired connection (ethernet) rather than wireless, I would log into your router's interface and double-check it's maintaining a good connection - if necessary reboot the router and try the upgrade again. Try and make sure there's only you using it at the time you do the upgrade.

How long should a ProRes 422 HQ render take?

I am trying to get a good guage on a time estimate for a ProRes 422 HQ export. Here are the specs...
FCPX 10.0.8
MacBook Pro 2.3 GHz Intel Core i7
16 GB RAM 1333 MHz DDR3
Running on Osx 10.7.5
My project is 71 minutes long... some titles, not graphics heavy.. Mainly RED RAW footage with some 5D mixed in.
SHARE option says a full 4K 422 PR HQ file would be about 381 GB.
About how long would you imagine the export taking? I am in the midst of rendering all right now in prep for final VIDEO ONLY export.
Final destination is to be BluRay via Compressor.
Secondary question.. with the above specified... Do I need to export in full 4K, or should I just go with 1080p, which it will ultiamtely be in... I want highest quaslity possible, of course... but if it is ultimately to be shown on 2K projection, is exporting the ProRes in 4K necessary?
Thanks!

Thanks, Tom.
Can you explain what you mean by don't Compress twice?
If my original stuff is RED RAW 4K (for the most part), should I do the Master File export as ProRes 422 HQ at the maximum file size? And then open the saved file in Compressor? Or are you saying just send it to Compressor from FCPX without exporting?
This is my first time using Compressor, so learning curve in play here. Thanks.
I already exported my six WAV files for my surround sound to match to the yet to be exported ProRes

How long should the email for the upgrade take?

I sent in the request for the free upgrade to MLion early this morning since I bought my MacBook Pro June 17th, 2012. I was curious if I should have gotten a response already or not?
I actually moved a couple of days ago and I used my new address instead of the one I had when purchasing the MB.
Thanks,
Nic

It has been more than 24 hours since i applied, and i still have not received my codes yet. i called the customer support this morning, and now i have been informed to wait for another 72 hours.
not very happy about this.

How long should the 10.8.5 update take to install?

Because it's a supplemental update, I figured the 10.8.5 update would install in a couple of minutes. It's been over 20 minutes since I clicked Restart and my iMac still shows Less than a minute to go and the progress bar has been in the same position for quite a while. Is this normal?

I also had the same issue with the 10.8.5 Supplemental Update 1.0.
2009 27" iMac (original hard drive recalled and replaced; 8 GB of 3rd party RAM added; no other notable additions).
I'll see if Apple has anything else to say about it.
I guess I'll just back up the drive and hope the Mavericks install works better...

How long should the upgrade from 10.4.11 to 10.6.3 take?

Subject line asks my question. How long should I expect the upgrade to take, using the Snow Leopard DVD I just purchased from Apple Store?
Thanks
Paul

20-30 minutes is the norm.

How long should it take iOS 6.1 to load on my iPhone?

How long should it take iOS 6.1 to load on my iPhone? It's been 3 hours and it is stuck in the same part of the download.

I now have the new phone. The order number is still not appearing on My 02.
It turns out that when I bought the phone, it was assigned a new sim card/telephone number. Now there are two phone numbers on my o2 account - the one I use, the one that came with the new phone.
The order number is appearing under the new sim card's phone number, not the one I intend to use.
Hopefully, O2'll be able to update the order and link it to the telephone number I use. It's not a major problem (at all) but I'd rather have it connected to the number I use than a random number that came with the phone.

How long should it take to down load mountain lion?

trying to download mountain lion. How long should this take?

Launch App Store. Click Purchases tab.
A progress bar will appear with details.
Best.

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed.

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed but it still kept getting stuck on the apple loading screen.

You have limited opportunity to attempt to create a backup of your created files.
That is what the SafeBoot or safemode appears to allow you -- at the moment.
Since the hard disk drive exhibits signs of failure or other major issues, plan
on a replacement in the near future. You may be able to get the computer to
start up in a regular full OS X (not safe mode) but consider its hours are limited.
An externally enclosed hard disk drive (with own power supply, not relying on
Mac ports to run it) is a good basic means of which to use a disk utility to make
a copy or a Clone of the current OS X. This may help retrieve an archive that
could be used along with a Time Machine backup, to restore your Mac once you
get a new hard drive installed inside.
Good luck & happy computing!

How long should a deployment build run

I started the deployment utility and it reports
Building...
8:35 AM
The Build Status is
Processing VIs...
Press F1 for Help does not respond.
That was over 20 minutes ago and there is no disk activity. There are about 80 IVs. About how long should this take?
thanx,
jvh

This time when I killed the non responsive LV task another one sprang up then became non-responsive. When I killed it the build finished:
Making an installer, please wait...
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
Creating merged database...
Creating installer files...
Build complete successfully.
Copying additional setup files
Compressing installer files
Done building deployment
The installer is finished
The build process is done.
11:15 AM
Warning: You may need to add any sequence file(s) referenced by the following expression(s):
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
Warning: The following VI(s) have characters in their names that are not valid for VIs that are not within an LLB. These VIs have been copied from their source LLB into Illegalfilenames.llb instead of being copied as separate VIs into SupportVIs:
Not A Telnet Connection?.vi
HTTP Point In Polygon?.vi
HTTP Standalone?.vi
HTTP Show GWS?.vi
Not A Cookie?.vi
Warning: There is no relative path between the following files. You may need to add a path to your search directories.
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\Database\Database.seq
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\reportgen_xml.seq
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\modelsupport2.dll
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\ModelSupport.seq
From [Installation Directory]\TestStand\Avionics.seq to [TestStand]\Components\Models\TestStandModels\modelsupport2.dll
+++++++++++++++++++++++++++++++++++++++

HT4906 how long should this download take?

Downloading Iphoto 11 It seems to be taking forever. How long should it take?

Impossible to answer. Depends on things like the quality of the connection you have, congestion on the network, load on the server.

How long should loading iOS8 on an iPad4 take?

Similar Messages

Maybe you are looking for