How long takes a 16bit multiplication on FPGA?

Hello,
if i try to multiply two for example 16bit numbers, how long will it take?
Are there some hardware multipliers on the FPGA to calculate it within 1 tick? Otherwise the multiplier have to be implemented on the FPGA and I suppose it will not be possible within 1 tick...
Best regards,
Helmut

On LV-FPGA targets like cRIO-backplanes or 78xx boards there are hardware multipliers implemented. Please refer to this document for further information. As you have stated correctly these mulipliers need 1 tick for execution.
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

HT204053 HOW LONG TAKE TO WAIT FOR ACTIVATION OF FACETIME?

how long take to activation of facetime ?

Oh it gets worse. Originally I was told my new address didn't have Infinity so I would be recieving a Hub 3 for normal broadband. After spending 2 1/2 hours on the phone on Monday and speaking to several different people within BT I am told that the reason the hub wasn't delivered was that my new home does have fibre cables for Infinity. Therefore they had cancelled the order for the hub as they assumed I would plug my existing Hub 5 in and use it. What they absolutely failed to do was to tell me this wasting 5 weeks of my time, frustration, phone calls and emails. the next day I recieved a home hub 3 in the post!!!! what I hadn't got was the correct socket on the wall for infinity and I tried to explain, but clearly failed, was that I needed either the socket changing (two BT department advisors couldn't get their head around this one) or I needed a filter to plug into the existing standard socket. One didn't arrive with the hub 3 so I went out and bought one from ASDA. I was told that I would recieve a call yesterday to arange for the engineers vist. they were just going to book a date and time for a visit but I explained that like most people I worked and therefore that is where you would normally find me during the day. I'm still waiting for that call....
anyway I plugged my Hub 5 in and hey presto in works. The Mbps speed is absolutely rock bottom, 1.82Mbps, nothin like the 38MBps that Infinity should provide but at least I'm connected to the 20th century. I waiting a while to see if the speed climbs up to the expected speed over the next few days before I waste another 2.5 hours on the phone to BT trying to get my point across and being told a load of twaddle.

If I go to the apple store how long take to replace my ipad

if I go to the apple store how long take to replace my ipad?

Please see below.
https://discussions.apple.com/message/23925012#23925012

How long take to reinstall OS X Maveriks?

How long take to download and reinstall the OS X Mavericks?

It takes me 30 minutes.i made a Mavericks boot USB. A good thing to have. It can take hours or all day if yoU have slow internet connection.

How long take for upgrade to Lion

I'm trying to upgrade to Lion but not sure how long take the download complete?

Trooper, hi. I'm downloading Lion. When I clicked on "buy" or whatever it was in the App Store, an icon appeared in the Dock. Because it takes a while, unless you're very sharp-eyed, it's not obvious at first that there is a small progress bar at the bottom of the Dock icon. (It becomes more obvious later, when it starts to show some progress.) On my 2010 MBP on ADSL this is about 40% at a guess ... just looking at Console see if I can see a start time ... some App Store messages around 14:24, it's now 15:38, say 74 minutes to do 40% so at this rate will take 185 minutes to do it all, = 3 hours. Don'r know if that's just the download phase though. (Funny, I regularly download a 1.2 Gb file on an older machine, a 2.4 ghz Core 2 Duo iMac and ISTR it only takes 20 minutes or so.) Of course there is the Apple server load to consider maybe. I do not know if the progress bar relates to the total install or just the download phase.
HTH, Terry.

How long takes extra space bought to appear in your iCloud account?

Just bought extra 10gb of storage @Â£14 but can't see it available yet , how long does it take to be available?

It should happen automatically but sometimes there's a delay in the purchase going through. Also, there's probably so many people doing the same thing right now that the servers are behind in processing it.

How long takes to reset a iphone 4s 32gb

how to reset a iphone 4s 32gb and how long it takes to reset

Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT204053 I just change my credit card on my acc, to pay my bil, how long take time to procese ?

I just change my master card , at my apple payment information , how long that will take time to pay my bil?

I am confused. If you had a debt, it is then paid imediatly.

How long take to fix the cracked screen

If I leave my ipad to fixe the cracked screen, how long is gonna take?

Apple does not repair iPads, but will replace the entire iPad for a flat fee. How long the replacement will take will depend on how the iPad is supported in your country. If you have Apple Stores where you are, you can make an appointment at the Genius Bar and they'll probably replace your iPad on the spot. For more information about getting service, see:
http://www.apple.com/support/ipad/service/faq/
Regards.

How long takes to change the broken iphone?

My lock button has broken. Do someone know how long, or is it immediately, to change for a new one? (it's still on the guarantee)

It is the Genius Bar in the Apple store. You need to make an appointment or you will be waiting a long, long time. Remember, the iPhone warranty is not international, so if the phone was not purchased in the US it will not be serivced.

Multi cam sequence - how to take audio from multiple tracks?

I have a multi cam sequence with multiple audio sources (cameras plus separate audio tracks).
According to this page, in order to have multiple audio sources, I need to mix them into a track in the source sequence:
http://help.adobe.com/en_US/PremierePro/4.0/WSADF1BC06-B8FB-4f23-8446-8D8F8539D7BD.html
So I mixed several tracks into submix 1. But when I use the multi cam monitor, submix 1 is not available as an audio source.
Is it perhaps possible to mix audio into a non submix track? If so, how?
premiere cs4

Multicam can only use audio 1, or audio follows video (you hear whichever track you see). There's no way to hear more than one track at a time.

How long take OS X Maverick to install?

i ask this because it began 8 hour ago and it hasn´t finished

The download is 5.3 GBs, so if you have slow Internet service it can take a while. However, once it is downloaded and begins, the installation should be around 45 minutes.

How to take result of multiplication and copy over to another spread sheet without taking formula?

I am trying to copy over the results of my product formula and copy it over to a separate spreadsheet.
Every single time I try to copy the results over, the formula seems to tag along with it!
EXAMPLE: I took 17.99 and multiplied it by 3.5 to get 62.97. All I want is the 62.97 so that I can put it on a separate work sheet... every time I try doing that... it copies over the formula!
So frustrating. Is there anyway to get this done? Or do I have to multiply all 2000+ equations manually and type it in myself?

Hi gn,
Glad to help. Thanks for the green tick .
Happy Numbering!
Regards,
Ian.

How long does it really take for fios

My condo just posted signs that fios is available ( the exact verbatum is "serivice will be hooked onto existing customers lines"). What dies that mean? I can not get direct tv because of where my balcony sits so I have nothing. Anyone know how long it takes to install verizon fios?

anwokorie wrote:
My condo just posted signs that fios is available ( the exact verbatum is "serivice will be hooked onto existing customers lines"). What does that mean?
There are two types of installations used in condos.
Fiber to the unit where they run microduct and fiber to each unit. The ONT is installed in your unit. TV, internet and phone are distributed from the ONT.
A centralized Multiple Dwelling Unit (MDU) install. A MDU ONT is installed in a common area. TV is delivered over existing coax. Internet is devlivered from the ONT via your phone lines using VDSL.
From the statement "serivice will be hooked onto existing customers lines", it sounds like you are getting an MDU installation.]
Once the MDU ONT is in place, getting service is simply a matter of scheduling a tech to come out to cut over your coax and phone lines to the ONT.

How long does it typically take to get a solution?

When using the disscusion board, how long does it take to get a solution? Also, is this service adequate to cover most inquiries? How does it work when you need support at 2 AM on Saturday?

Well, there are no guarantees.
If you look at the names, there are regular guys and blue guys, the blue guys are NI people. Regular guys such as me are just volunteers trying to help out because it is fun. There are many contributors with 10+ years of LabVIEW programming experience, so the collective knowledge and intelligence of this board is quite high and it is very likely that you'll get an excellent answer pretty fast. Participants are from all over the world, so even at your 2am it will be a more reasonable time somewhere else.
Next to the name are some yellow (or blue) bars that indicate seniority based on the number of posts, ratings received, etc, so if there are multiple answers pick the one from a more trusted source.
As in real life, the quality of the answer is strongly dependent on the quality of the question. Start with a captivating title related to the core of the question and not something generic such as "please help", labview question", or similar. Explain your problem as detailed as possible, what you are trying to do, what results you expect, what errors you see, etc., not just "it does not work". Many times it is easiest to attach a simplified version of your program. Make sure to put some annotations on the diagram pointing out the problem you see. Put some reasonable default values in the controls so we can run it with real data.
So, just go ahead and ask, it's free!
Of course there are also premium support options if you want more traditional support with case numbers and live telepone help. Contact your NI rep for details.
LabVIEW Champion . Do more with less code and in less time .

How long takes a 16bit multiplication on FPGA?

Similar Messages

Maybe you are looking for