How long the publication is available on the apple store, after being published in the dashboard?

I published a new edition for almost one hour, and so far it does not appear available on the app. ANy help? many tks!

My app is now available in the AppStore. Then I published a new edition for exactly 49 minutes, but so far it does not appear available for download in the app, which I have already downloaded the iPad.
I'm thinking that is taking too long

Similar Messages

  • How to know how long the dba jobs ran?

    How would I know how long the dba jobs ran.I am not sure about dba_jobs.total_time.Is there any way or data dictionary to find the how long the dba jobs ran?

    Hi,
    Oracle recommends use of dbms_scheduler rather than dbms_job on 10g or higher.
    If you do switch to dbms_scheduler, run duration for all job runs is available in the all_scheduler_job_run_details view and the run duration of the last job run is available from the all_scheduler_jobs views.
    This is one of the several benefits to switching to dbms_scheduler.
    Hope this helps,
    Ravi.

  • How long the patch will be provided for flash 10

    We are using Flash Player 10. Now Adobe is provide the patch of Flash 10.HDoes any know how long the patch will be provided for flash10?

    As you've noted, we are currently updating our 10.3 release with security fixes as they become available.  There's been no announcement of this being discontinued so I would expect the process to continue for the time being.

  • Can I see how long the longest entry has been in the sticky table ?

    Hi,
    I have a customer who has a possible issue with the sticky inactivity timeout on the CSS. At the moment we are using no timeout, just relying on the CSS to purge the entries.
    However, is it possible to see how long the longest entry has been in the sticky table. I can see the 'elapsed time' with the 'show sticky' command but this only shows 100 entries per time and not in time order ?
    Thanks in advance for any help

    Michael,
    You can use the command "show sticky-table" with L3 or L4 options, depending on what you have configured, then add ip addressing to the command, to focus down to where the oldest sticky entries are likely to be, but theres no other way. If your problem is having too many entries, configure a sticky timeout, as the default of 0 will keep then forever, or until overwritten due to the table being full. If the problem is sticky entries timing out too early, you can use the timeout parameter to increase their life, but the sticky table is limited to 32k entries.
    Peter

  • We are using iPhoto '09 trying to import photos from  a memory card.  We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing.  Any idea how long the import should run if there were 5000 photos on the card?

    We are using iPhoto '09 trying to import photos from  a memory card.  We stopped the import and ejected the card over 20 hours ago, but iPhoto says its still importing.  Any idea how long the import should run if there were 5000 photos on the card?

    Don't know how long it would take to import that many photos but if you stopped import and ejected the card ther is something else wrong here.
    I would Force Quit iPhoto. Then Restart your mac. Then restart iphoto to see if any or all of your photos were imported. If they ae you're good to go. If they were not imported I would try importing fewer photos at a time and see what happens.

  • Report: How long the user has not logged into SSHR

    Hi experts,
    I am looking for a report, which showing me, how long the user has not been logged into SSHR?. Because some poeple dosn't work any more in the company, and the list should enable use to deactivate their accounts.
    Thanks in advance
    Mehdi

    The AOL signon capabilities are good and you'll find useful stuff in those links.
    If you're after something quick in SQL try this:
    SELECT last_logon_date, user_name
    FROM fnd_user
    WHERE trunc(last_logon_date) < trunc(sysdate) - 90;
    That will get you everyone who hasn't logged in for 90 days.
    Edited by: Duncan Casemore on Jan 20, 2011 9:26 AM

  • HT4515 How do you adjust how long the iphone rings for before going to voicemail?

    How do you adjust how long the iphone rings for before going to voicemail? Mine diverts after only a couple of rings.

    I believe you do that through your phone service provider.  I wonder if you have unheard messages in your voice mailbox.  I think some carriers use that mechanism - diversion to voicemail faster if the recipient has unheard messages.
    I do not believe you can change this directly on your iPhone.

  • How LONG I'll need to wait for Apple GENIUS fix the incompatibility

    I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
    What is the best thing I've to do???
    Downgrade the OS??? Change the Plataform????

    Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
    Nokia 5800 XpressMusic Red V52.0.007
    Hit the Kudos if I helped!

  • Ipod Touch Battery is Drained even with the Ipod Turned off? and how long the batery goes on Stant Mode?

    Hy ;D I bought an Ipod touch 4G 3 mouth ago , and recently the i noticed that the battery is drained even off .... is that normal? I turn him off( with the red bar) and put out side the bed , when i Wake up tha batery is about 80% ... (no Wi-Fi on)
    And How long the ipod battery goes with the stant mode ?
    Thanks alot for any one

    I did a test on mine.
    My 4th generation model running 4.3.1 last 10 days on and in sleep mode.
    At the end of 10 days I got the 20% low battery warning.
    I would try a RESET on yours.
    Hold down the Home button and the Sleep/Wake button at the same time until you see the Apple logo.
    It will reset and restart itself in a few minutes.
    See if that helps.

  • Using the warp tool I'm stabilizing  my video and getting rid of the edge artifacts. Analyizing is clear on how long the process will take, but when it stabilizes I only get three moving dots. I there a way to know when the process will stop? Thanks.

    I am using the warp tool to stabilize my video and get rid of the edge artifacts.  The program is very clear about how long it will take to analyze, but there is nothing about how long the stabilization will take nor when I know when it is complete.   Thanks ahead of time.

    Warp Stabilising is a two part process.
    Analysis and Stabilising.
    Both have a banner across the Program Monitor during the process ( unless you have turned that off.
    Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
    You may need to hit "Analyse" Button again.
    You should see the number of frames and the estimated duration during this process.

  • How long do we have to pickup our apple product at the apple store once it's ready?

    How long do we have to pickup our apple product at the apple store once it's ready?

    Give your local Apple store a call. They will give you definitive details.
    Ciao.

  • How long the battery can play in 30G?

    Did someone count how long the battery can play?
    my 30GB can play around 11-12 hours.. but not very accurate.
    Any method to count the playing time?
    thk!

    "Any method to count the playing time"
    Everybody's battery playback time will be different depending on you use the iPod. Here's the Apple test.
    How to accurately determine your iPod battery life.

  • For how long the library Cache latch is hold.

    Hi ,
    For how long the library Cache latch is hold.
    Is it hold , till the new sql is placed in the library cache
    or
    Till it got parsed
    or
    Till it got executed?
    Thanks
    Naveen.

    Hi ,
    For how long the library Cache latch is hold.
    Is it hold , till the new sql is placed in the library cache
    or
    Till it got parsed
    or
    Till it got executed?
    Thanks
    Naveen.

  • How to know how long the roll back is left?

    Hi, experts,
    I run a insert statment for about half hour. I just broke the procedure by clicking the break button in pl/sql. I want to know how long the roll back is left.
    Thanks

    pl/sql has a break button?
    assuming that you're using some gui tool, and hit a break button while executing some pl/sql - when the "break" is hit, the gui either rolls back the transaction or it leaves the transaction alone, waiting for you to either commit or rollback.
    the rollback will stay there until the transaction is either committed or rolled back.
    when the session disconnects, it will either rollback or commit the transaction (depending on the tool).

  • Does Compressor 4 tell you how long the compression actually took?

    I'm new to Compressor and compression in general.
    When I "Submit" a video for compression in Compressor 4, it creates an entry in the History window that shows you when the video was submitted for compression.  It also gives an estimated time for completion while the video is being compressed (though it seems to me it fluctuates and can be wildly inaccurate).
    I usually leave the computer while the compression is happening.  If it's done when I come back, I don't know how long the compression actually took.  I don't see anything in the entry in the History window that tells me that.  Is there any way to know when exactly the compression completed, or how long it took?
    Thanks

    Hi Jd, if you have SUBMITTED a job to a cluster (maintained by Qmaster) [not this computer], the transcode job pushed to Qmaster by compressor.app draws events and conditions in the various log in Qmaster. You can find these logs in your ~/library/application support/apple qmaster/logs for the cluster , theater vice  controller, the transcoder daemons and job controller. These contain the start , end and I believe ELAPSED times for each job . It doesn't accumulate by a BATCH .. I will stand corrected though.
    Simply browse these logs this with console.app. U can ofcourse "go troppo" and write some shell, perl or apple script to develop some system management facility records for your clients accounting by doing this... Just parsing the text records...
    Anyway I recall,his info u want for JOB COMPLETION (elapsed time) is there despite its coarse data. Sadly I have not found a way to detail the CPU, storage and I/o .. Seems too much to do for my needs.
    As u state, the SHARE MONITOR.app is for viewing dynamic job. It's a bit hit and miss when using over a cluster. Since mountain lion, it seems to jam up a,lots and magically ,come back to Liffey after many internal messages (see logs) that it failed on socket x n y ..... Sounds like its in need of some stability and robustness additions.
    I've also found for very long and numerous multipass segmented transcodes that share monitor gets over whelmed.... Especially when the share monitor.app UI is utilised to "Expand all"... It gets super busy collecting traffic from Qmaster ..if u are using a cluster.
    Hth
    Warwick

Maybe you are looking for