How long till EIN number is active?

I got my EIN number last week and created an iBookstore account, but a week later I get an email that says
When reviewing your iBookstore application we had an issue verifying your U.S. Tax ID and legal entity name with the records at the IRS. You can reenter your information here.
Note that if you recently registered for a U.S. Tax ID, it can take time for it to become part of the IRS database records even though it has been issued to you for use. We cannot validate your U.S. Tax ID information until it is in the IRS database records. "
Anyone know how long it takes from the person giving me the EIN number on the phone till it is in the IRS database records?

The pounding on the system is exactly what I want to avoid. Thats why I don't want to keep trying to resend the data.
Patience wont help me here as the ball is now in my court, not theirs, I'm not waiting for Apple to do anything. My approval process is now halted until my EIN number is in the system, but apple aren't automatically checking it, they are waiting for me to resubmit my info. I don't want to resubmit my info and waste more of their time until i know my info is ready - it's a chicken and egg problem.
I found this site
http://www3.knightfoundation.org/apply/letter/ein_lookup.aspx
I guess when my EIN shows up in that search it will be in the IRS database

Similar Messages

How long does the number porting process take?

Hello Everybody! I just got my iphone (witch I LOVE it by the way) but I was wondering, how long does the number porting process take?
I ported my phone number over from SprintPCS last night at around 7pm EST and right now it's 8am EST and my Palm seems to still be working... Is this normal?
I'm still receiving incoming calls to my Palm, Text messages to my Palm, but yet I can do outgoing calls from my iphone... I'm kinda confused...
I mean I received the text on my iphone from sprint telling me: "Welcome to AT&T" as well as receiving the e-mail saying my new phone number is the same one I've had for 6 years now... Is 13 hours considered normal?
Thanx! :-D

QueenYvette,
If it continues to be an issue tomorrow, I would recomend calling again, and getting in contact with AT&T's porting department. They are familiar with resolving any issues that may arise.
Powering off both phones is to make sure that the old phone is not maintaining an active connection with the old carrier that can interfere with the last steps of the porting process. If at all possible its a good idea to leave the old phone powered off, and restart the new phone about once an hour so that it will resync with the towers.
Hope this helps,
Nathan C.

How long is iTunes Log-in active?

I have a password lock on my iTunes account so that my daughter can't download any paid apps without my knowing. She can't even update her free apps without me entering my password...or so I thought.
Well, after I entered my password, she went in behind me and downloaded $34 worth of music and videos that were charged to my debit card. Is there a way to log out of iTunes? If not, how long is the log-in active? That way I can keep her iPod in my possession until after the time period is up.

If you don't log out, additional downloads made within the next fifteen minutes, don’t require entering
your password again.
Page 191 of iPhone iOS4 User Guide

ZENCast Update - How long till the next o

Any idea how long till the next ZENCast update?
I am still waiting to be able to transfer MP3 files to my ZV:M from inside the program with out it converting them to a Motion JPEG.
Imagine a podcasting program that can't transfer MP3s to the device it was made for. Crazy I know. I don't want to try the sync stuff again. That never worked for me. I just want to click transfer, decide what I want to copy over, and be done with it.
There are a lot of nice features I would like to see in it, like adding the recently transfered MP3s to a playlist (say, 'New ZENCasts' (which I currently do manualy)). But the simple ability to tell ZENCast Orgainser (I am an Aussie, we spell it with an 's') not convert MP3s to MJPEG, and just copy them over would be great.

This still does not address the original message.
Will there be a way in zencast to transfer an audio cast in it's nati've format into the zen vision:M as it's nati've format, i.e. as an MP3 and not an AVI containing MJPEG?

I've lost a number of butons for google. How long till you have fixed the compatibility issue?

When I was asked to upgrade Firefox it did say it was not presently compatible with Google Tool Bar. I have lost most of my buttons for Google now. How long will it be before this compatibility issue is resolved? Can I go backwards to the previous version?

I suspect an extension that you had isn't compatible with Firefox 5.
You can try this extension to override compatibility issues,
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
If you still want to downgrade, see here:
* http://www.mozilla.com/en-US/firefox/all-older.html
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-4.0/ - choose the operating system, then '''en-US''' directory
* [[installing firefox]]

Timing how long a frame has been active

I am trying to time how long a frame as been the active
frame. Once the frame is displayed, if the user doesnt press a
button to move to another frame after 6 seconds, the movie should
jump back to the previous frame it was at. I think the setInterval
function would be correct to use here to time the 6 seconds, but im
not sure how to clear the interval after. Here is my logic, (i know
this isnt correctly coded..)
If a button was pressed before the 6 seconds has elapsed,
then it would not jump to frame5, i think.. but im not really sure
if this will work for what i am tryin to do, and if there is a
simpler way. thanks for any advice

onEnterFrame does NOT execute once when the frame is entered
(despite its name). it executes repeatedly (ie, it starts a loop)
starting when the frame that contains its code is entered and
continues until the timeline to which it's attached no longer
exists or a delete onEnterFrame is executed.
in addition, you should always precede your setInterval()
statement with a clearInterval(). especially, when your setInterval
is attached to a frame. it's almost guaranteed that you'll have a
mess on your hands if you use the code given by madmac, unless you
add that clearInterval().

HT204053 HOW LONG TAKE TO WAIT FOR ACTIVATION OF FACETIME?

how long take to activation of facetime ?

Oh it gets worse. Originally I was told my new address didn't have Infinity so I would be recieving a Hub 3 for normal broadband. After spending 2 1/2 hours on the phone on Monday and speaking to several different people within BT I am told that the reason the hub wasn't delivered was that my new home does have fibre cables for Infinity. Therefore they had cancelled the order for the hub as they assumed I would plug my existing Hub 5 in and use it. What they absolutely failed to do was to tell me this wasting 5 weeks of my time, frustration, phone calls and emails. the next day I recieved a home hub 3 in the post!!!! what I hadn't got was the correct socket on the wall for infinity and I tried to explain, but clearly failed, was that I needed either the socket changing (two BT department advisors couldn't get their head around this one) or I needed a filter to plug into the existing standard socket. One didn't arrive with the hub 3 so I went out and bought one from ASDA. I was told that I would recieve a call yesterday to arange for the engineers vist. they were just going to book a date and time for a visit but I explained that like most people I worked and therefore that is where you would normally find me during the day. I'm still waiting for that call....
anyway I plugged my Hub 5 in and hey presto in works. The Mbps speed is absolutely rock bottom, 1.82Mbps, nothin like the 38MBps that Infinity should provide but at least I'm connected to the 20th century. I waiting a while to see if the speed climbs up to the expected speed over the next few days before I waste another 2.5 hours on the phone to BT trying to get my point across and being told a load of twaddle.

Please help how can I get Number of activations changed?

How can I get my iPads reset for number of activations? I have had an original iPad and two iPad 3 and now 3 iPad Air due to defective tablets.They were replaced for technical issues. I keep getting this message on both devices in BAM2 E_AUTH_BAD_DEVICE_KEY_OR_PKCS12
I have not even read the book I originally purchased from BAM. Please help.

They'll know more in the Adobe Digital Editions Forum

How long does your password stay active after a purchase?

i did a purchase of a game on my ipod and entered my password in to purchase it and then passed my ipod to my daughter and then she has gone into another game and purchased some things without entering my password so obviously when you enter your password for a purchase it stays active for a while so you dont have to re enter your password , but for how long?

From the manual:
Your purchase is charged to your iTunes Store account. For additional purchases made
within the next fifteen minutes, you don’t have to enter your password again.

How long it will take to active a subscription

Hi ! I have just activated my subscription for Singapore, how long it will take for me to access the calls? how to make a call to mobile or landline numbers ?

you can visit the link below for instructions on how to check the status of your current order;
https://support.skype.com/en/faq/FA288/what-is-the-status-of-my-order
if you need further assistance, you can also try to contact customer service. Just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

How to know the number of Active users logged in to a Essbase Application?

Hi,
Is there way to capture/log the number of active users who have logged into a particular Essbase application at a given time.
In Essbase or in Shared services?
I know we can see the EAS-Edit Sessions shows the actively logged-in users, then we can sort on the application/database & manually count the number.
Is there a way to capture it in a log at a given time on a regular basis. Any MAXL or Shared services feature?
Appreciate your thoughts.
Thanks,
Ethan.

You could use maxl .
display user all;
there will be a column called "logged in" which will display true/false for the users
but that will just show if they are logged into the server and not the application
You can also use use display session
display session all;
or
display session on application sample;
which should show what you are after.
Cheers
John
http://john-goodwin.blogspot.com/

How to check the number of active jdbc connections

hi all,
i'm creating a connection from Java using java.sql.Connection class and with oracle thin drivers. connection is creating properly.
now, i want to know how many connections are created, through the sql query. i forget the query.
its helpful for me.
regards
pavan.

Your requirements are a bit vague - the only place to accurately determine the number of connections is in Oracle using the V$SESSION virtual view.
It can tell you the number of session (active or idle) made from the platform running that Java code. It can also tell you basic session information like the current SQL (if active) that is being executed.
There are numerous other V$ views that can be used in conjunction to build a very accurate picture of what the session is doing and what resources it is using.
Details are in the Oracle® Database Reference manual. On-line copies of all manuals available via http://tahiti.oracle.com

How long till Raw compatibility for the Olympus Omd Em1

I just got the Olympus Omd Em1 to use on a month long trip through Europe in December. I want to shoot in Raw but I can't even save the files on my Mac Book because it doesn't recognise the files. As i see it I can shoot in both Jpeg and Raw, but that takes up a lot of space on the SD cards and doubles the photos on Aperture, when I can eventually download the Raw files, also I will have to keep the SD Cards full till I can download the Picks in Raw. So I will have to have additional cards that I don't really need. (also added expense). I can only download to the Olympus Viewer 3,but It looks like I can export the pick's only in Jpeg or Tiff, Not in Raw? I got the Em1 specifically for this once in a lifetime trip and now I find out Aperture won't accept the Raw files. Is there any chance that the Apple Software engineers will update the program faster than the normal 3-6 months? If there are Apple Employees out there this is the only way I can find to ask?

I can not at all confirm getting tons of noise in Lightroom. I downloaded the Lightroom 5.3 RC (release candidate), because I couldn't stand it any longer to have to shoot JPEG and not RAW. I've been using Aperture for years now and simple am used to work with raw images. And the slowness of the Olympus viewer is simply unexceptable for me. In comparison, I also like the results that I'm getting from Lightroom better than those from the Oly viewer.
So, at least until Apple comes out with E-M1 support, I will stick with Lightroom to have a solution that actually works. The release candidate expires at the end of December.
But then, Adobe also sells Lightroom with a huge discount at the moment. So far I like it quite a lot. So I might also just buy it and stick with it.

How long till you slackers fix the clipboard bug in firefox?

seriously im ditching firefox as of now for opera cuz no one seems to be interested in fixing the virtual private clipboard bug in firefox.
It is nothing short of infuriating & frustrating!!!!!!!! CMON U SLACKERS!!!!

Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

I've entered my answer to my security questions wrong to many times.... How long till I can get on again to buy an app

Need help. Problem was it asked me a question I didn't even have selected to ask me. So stupid....

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

How long till EIN number is active?

Similar Messages

Maybe you are looking for