How long use with BETA drivers

2_08_0002Beta driver has been a ok driver!! But when will we get a full retail driver? A company like Creative should and could make real working drivers you think?
I want new drivers for my Audigy 2 card, and yes i know there are 2_07_0004 drivers out, but they are originally for X-Fi! So please creative... make me a happy costumer!!

The most reliable way would be to load each driver (and all code using it) using its own classloader.
But that would likely be overly complicated.
The most viable solution will likely be (especially as this is a short term project, you say it's going to be retired soon) to ensure a commit after every smaller subset of the total data volume and keep using the Oracle 8 drivers.
Try forcing a commit after say every 100 records and see if you still have the timeout problems. Most likely this will take care of your problems at the cost of a slight performance decrease (but better somewhat less than optimal performance than risk database corruption or crashing applications, right?).

Similar Messages

HT5922 I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

Bonjour,
I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

In article <e35sc3$ru1$[email protected]>,
"-->dan mode" <[email protected]> wrote:
> > All
> > I have a website I would like to remove from the
internet, However I am
> > planning on keeping the IP for a development
location and would like to
> > put
> > a page up that says this site is no longer
available. Is this how you do
> > it
> > or are there other pages to display when a site is
removed.
> > Thanks
> > Dave
Depending on how long the site has been active, it may be
already
spidered by search engines and cached. However, for the most
part, I
usually use my FTP program OR even Dreamweaver itself (now
that I can)
to delete files on the server just as I do locally. Hit the
delete and
confirm

HOW TO USE "WITH" STATEMENT IN MESSAGES

MESSAGE e001 WITH WERKS SY-REPID
TELL ME HOW TO USE "WITH" IN MESSAGES SEND SYANTAX AND EXAMPLE CODE

Messages e001(zz) with Var1 var2 var3.
For this statement to be valie, the variables var1 var2 var3 should be defined alrteady in the program.
and in se91, you should define a message class (Say ZZ ).
In that message class you can create a message with number (Say 001) with place holders (&).
001: & is a sampele message for & hgh & hjknkn
The & will get replaced by the variables var1 var2 var3 in the run time.
YOu can also create success messages if yo say:
Messages S001(zz) with Var1 var2 var3.
Information
Messages I001(zz) with Var1 var2 var3.
Warning:
Messages W001(zz) with Var1 var2 var3.
Abend:
Messages a001(zz) with Var1 var2 var3.
REFER sample programs : DEMO_MESSAGES
DEMO_MESSAGES_SIMPLE
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

For how long ASA with AIP 20 keeps events?

I have ASA5520 with AIP SSM 20 and I am using IPS Manager Express. For how long can AIP keep IPS events? How can I save events before the logs are recycled?
Thanks in advance

Have a look at the following post:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Intrusion%20Prevention%20Systems/IDS&topicID=.ee6e1fc&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dde8f9b
Please rate helpful posts.
Also please note that IME has its own database (on the PC where its installed).
Regards
Farrukh

Please help how to use WITH query in UPDATE

Hi Experts,
Please help me.
Thanks.

Not sure about your required output. But try using WITH clause query inside SET clause of UPDATE statement.
   UPDATE SALES_REVENUE SR
    SET
             (SR.TODAY_REV,
             SR.TODAY_MARGIN,
             SR.TODAY_UNIT
             ) =
(WITH result_sum_temp
AS(
    SELECT SALE_ID, IN_TEAM, 1 SALE_FLAG, loc, seg,
        SUM(REV * rate) AS sum_rev,
        SUM(MARGIN * rate) AS sum_mar,
        SUM(UNIT) AS SUM_UNIT
    FROM SALES
    WHERE (IGNORED IS NULL OR IGNORED <> 'Y')
    AND SALE_SPOT = 7
    AND SALE_ID = 375
    AND SALE_MODEL = 'D'
    AND IN_TEAM IS NOT NULL AND loc IS NOT NULL
    GROUP BY SALE_ID, IN_TEAM, loc, seg
     UNION ALL
    SELECT SALE_ID, OUT_TEAM, 2 SALE_FLAG, loc, seg,
        SUM(REV * rate) AS sum_rev,
        SUM(MARGIN * rate) AS sum_mar,
        SUM(UNIT) AS SUM_UNIT
    FROM SALES
    WHERE (IGNORED IS NULL OR IGNORED <> 'Y')
    AND SALE_SPOT = 2
    AND SALE_ID = 375
    AND SALE_MODEL = 'D'
    AND OUT_TEAM IS NOT NULL AND loc IS NOT NULL
    GROUP BY SALE_ID, OUT_TEAM, loc, seg)
                (SELECT   t.sum_rev, t.sum_mar, t.sum_unit
                   FROM   result_sum_temp t
                  WHERE       SR.SALE_ID = t.SALE_ID
                          AND SR.team_id = t.team_id
                          AND SR.SALE_FLAG = t.SALE_FLAG
                          AND SR.SEG = t.seg
                          AND SR.loc = t.loc
                          AND t.SALE_ID = 255)
    WHERE   SR.SALE_SPOT = 890
            AND SR.SALE_ID = 255
            AND (SR.SALE_ID, SR.team_id, SR.sale_flag, SR.SEGMENT, SR.LOB) IN
                      (SELECT   SALE_ID,
                                team_id,
                                sale_flag,
                                seg,
                                loc
                         FROM   result_sum_temp));

[FB4] PHP Data Service - how to use with DB2?

Hi,
I've tried to follow the tutorial that wires a datagrid to a PHP service. However I need to get data from DB2 rather than MySQL. I have created the service and populated an array using db2_fetch_object - the service works as I can call it with a simple test PHP script. However if I try to use this in the Data Service dialogs, when I get to the point of creating a return type for my getAllItems() call, it returns an error telling me to look in my server logs. My PHP logs say nothing.... Does this work with DB2? As far as I know the data returned by a db2_fetch_object is pretty close to the mysql version.
Thanks
NB my PHP code is as follows:
public function getAllItems() {
        $rows=Array();
        $query_cust = ".....SQL in here.............";
        $conn = connectLocal();
        if ($conn) {
            //error_log("Got connection");
            $stmt = db2_prepare($conn, $query_cust);
            $thisrow=0;
            db2_execute($stmt,array(0));
            while($row = db2_fetch_object($stmt)){
                $rows[$thisrow]=$row;
                //error_log($row->CUSTNUM);
                //error_log($rows[$thisrow]->CUSTNUM);
                $thisrow++;
            db2_close($conn);
        return $rows;

OK, if I remove the customer name field all works OK. So I tried reinstating the customer name field but modifying it in the returned array with a custom PHP function that replaces all the non-printing characters with acceptable ones. This function works ok when I create XML to use with Flex 3 datagrids, or with some javascript apps that use JSON arrays. But I still get the error. This is the function I use:
function stripcharsnotblanks($input){
$output = str_replace("&","+",$input);
$output = str_replace('"',"",$output);
$output = str_replace("²","+",$output);
$output = str_replace("ü","ue",$output);
$output = str_replace("ä","ae",$output);
$output = str_replace("ö","oe",$output);
$output = str_replace("Ö","Oe",$output);
$output = str_replace("\'","'",$output);
$output = str_replace("€","Eur",$output);
$output = str_replace("/","",$output);
$output = str_replace("%","pc",$output);
$output = str_replace(">","]",$output);
$output = str_replace("<","[",$output);
$output = str_replace("@"," at ",$output);
$output = str_replace(";",":",$output);
return $output;
Do you know of any other characters that could cause problems with AMF?
Thanks

How to use Multiple JDBC Drivers?

Hi,
I'm working with an application that connects to an Oracle 8 database and Oracle 10 databases as a single user/schema and then the application users all share the single Oracle user. When we use an Oracle 8 JDBC driver, then a module that inserts a large number of records (1500+) into an oracle table behaves inconsistently and either times out, pauses inserting records for exactly 1 hour, or throws an error. It also seems somewhat inconsistent from user to user.
The problem goes away when we use an Oracle 10 or Oracle 11 JDBC driver. However, the Oracle 10 JDBC driver has a problem with truncating the hh:mi:ss from datetime column types to 00:00:00. This is a known Oracle error and I know there is a flag that can fix this with the Oracle 10 driver. However, with the way the JDBC driver gets installed in the application, we are unable to set that flag.
Oracle 11 JDBC driver also doesn't have the Oracle 8 issue inserting a large number of records. However, we need to connect to an Oracle 8 database and Oracle 11 JDBC does not support that. The database is still active but being retired soon so no chance of upgrading to a newer Oracle version.
I asked on the application forum (it's SAP Manufacturing Intelligence and Integration - MII) and was told the following. Data Server is a name for the connection to the database.
"If the class packages are the same (assuming so since all of the oracle drivers I've seen use the same driver) then you can't have 2 at the same time, since they will overlap and you can't prioritize or point one data server to 8 and the other to 11."
My experiments with trying to use two drivers have also shown this to be the case for what I tried.
Any ideas or thoughts of how to make this work? We are using a JDK 1.5.
Thanks for the help.
Kerby Johnson

The most reliable way would be to load each driver (and all code using it) using its own classloader.
But that would likely be overly complicated.
The most viable solution will likely be (especially as this is a short term project, you say it's going to be retired soon) to ensure a commit after every smaller subset of the total data volume and keep using the Oracle 8 drivers.
Try forcing a commit after say every 100 records and see if you still have the timeout problems. Most likely this will take care of your problems at the cost of a slight performance decrease (but better somewhat less than optimal performance than risk database corruption or crashing applications, right?).

Singletons - How to use it better?

The web application has Actions <--> Services <--> Implementations. The user comes to the UI, changes some settings (pagination size, show/hide properties), and these settings are saved in an XML file. The XML file is read/written by a 'UIConfiguration' class and settings are stored as a bean. My singleton 'ConfigService' instantiates this UIConfiguration. The code is like this (how do I post code here?)
public class ConfigService {
private Configuration uiConfiguration;
private static ConfigService instance = null;
private Map<String, ConfigBean> uiConfig;
private ConfigService(){
init();
private void init(){
uiConfiguration = new UIConfiguration();
try {
uiConfig = uiConfiguration.getConfigurations();
} catch (Exception e) {
public String getServerUrl(){
return "http://"+ uiConfig.get("server.hostname").getValue()
+ ":" + uiConfig.get("server.port").getValue();
public String getUIProperty(String propertyName){
return uiConfig.get(propertyName).getValue();
public static ConfigService getInstance(){
if(instance == null)
instance = new ConfigService();
return instance;
public void updateUIConfig(Map<String, ConfigBean> configs){
uiConfig = configs;
public Map<String, ConfigBean> getAllUIProperties(){
return uiConfig;
**Things that I think that I am not doing right are:* *
1. I have ConfigService.getInstance() in the contextlistener.
2. Also, everywhere in the application I do ConfigService.getInstance() whereever I need a UI property.
3. I do ConfigService.getInstance().updateUIConfig(configurations) in my UIConfiguration class when I update the properties.
Is this a right way to do this? Is there any better/clean way of doing this. I also use Spring to inject services into my action classes. Can that help to better the behavior anyhow?
Please help me here.

user2893271 wrote:
2. Also, everywhere in the application I do ConfigService.getInstance() whereever I need a UI property.
3. I do ConfigService.getInstance().updateUIConfig(configurations) in my UIConfiguration class when I update the properties. There's nothing necessarily wrong with either of those.
On the other hand, if you have a lot of getInstance() calls in the same method or class, you might want to make a local or member variable and just assign it once, rather than repeatedly calling the method. This would be more for simplicity and clarity, but if you have a lot of activity there across many threads, it's possible that lock contention (if you go with lazy instantiation and a synchronized getInstance() method) could have a performance impact. (Do NOT assume that it will and then munge up your code just based on that. Only make performance-related changes if you have measured and found that to be a bottleneck.)
One other issue is whether you should even have a Singleton in the first place. There's been a lot of backlash against Singleton lately. It's true that it is overused and abused, but, IMHO, the backlash has been just as over the top and knee-jerky as the initial "let's use singleton everywhere" approach. There are cases where singletons are appropriate. Yours may be one, or it may not. I don't know enough of your design to comment on it one way or the other, and I'm not interested in pursuing that question. I just want to raise the issue to you as something to think about and possibly research further.

Win 7 Crashes with Beta Drivers and Sound pack 2.0

? Hello Folks!
Just updated to Win 7 Ultimate x86, build 7600. Unfortunately I have no sound at all. I installed the Beta Driver released by Creative on July and it freezes my computer during the driver install.. and freezes the boot up process when I installed the drivers in safe mode.
I removed them.. now my system works fine. I gave a shot as well to the 2.0 pack from Daniel... everything works fine.. 'til it gets into the driver install... the system freezes on the process. I tried as well with safe mode.. and the boot process freezes.
I checked the log for Startup Repair.. and it reports a bad driver. SO again I removed them, and system boots fine with no probs, BUT still no sound.
Any ideas fellas.. someone with x86 7600 build, with sound working?! I forgot to add that I have an XtremeGamer Sound Card
Regards
Roberto

UPDATE
Changed the Sound Card to another PCI Port and worked fine. Now I'm using Daniel's driver set. Everything is going great at the moment.

Time machine questions... how to use with an external drive etc.

Hi,
I am about to start using Time Machine. I have a few questions:
1. Can Time machine be used to restore data and applications / application settings?
2. I have a CalDigit VR eSATA drive which is 1TB RAID 1 which I was going to use as the Time Machine target drive.
Does Time machine store all of its data files in one main folder with many sub folders?
If my TM backup data takes up 600GB on the drive can I safely store other data on the 400GB or is it best to partition the drive HFS+ Journaled 600/400 and leave TM to its own dedicated partition?
3. Does TM keep adding data until it runs out of disk space and only then delete older BUs?
4. Is TM a good backup software for total recovery or is something like SuperDuper better? I would almost never use TM to recover a file that was deleted... but I am looking for a way to protect against data lost in the case of HD failure.

If you haven't found this yet, take a look here: http://www.apple.com/findouthow/mac/#tutorial=leopardtimemachine
That should give you a rough idea of the "look and feel."
1. Can Time machine be used to restore data and applications / application settings?
Yes, unless you tell it not to, it saves everything (except some system caches, temp files, etc.). If your HD fails, you can recover your entire system to a new/repaired HD via your Leopard install disc (it has the restore utility) and your TM backups. OS, apps (Apple and 3rd-party), preferences, settings, data, the whole system.
Does Time machine store all of its data files in one main folder with many sub folders?
As you may be able to see in the video, the small Finder window is very much like the main one; you can see your data in the same way. TM presents a "picture" that appears to be a full, separate backup of the way your Mac looked at any time. Of course, that's an illusion. It only actually copies files/folders that have been added or changed since the last backup.
You can't tell which items are "real" and which are the "multi-links" representing a file that didn't change on that particular backup.
For more info on the internals: http://www.appleinsider.com/articles/07/10/12/roadto_mac_os_x_leopard_timemachine.html
3. Does TM keep adding data until it runs out of disk space and only then delete older BUs?
Sort of. After an initial Full backup, it does incrementals (hourly, if you let it). Then it converts the first of the day to a daily backup, which it keeps for a month, and deletes the other hourlies after they're 24 hours old.
After a month, it converts one per week into a weekly backup and deletes the dailies.
It keeps the weeklies until it runs out of room, then begins deleting the oldest. But because of the "multi-links," it doesn't delete it's copy of anything that's still on your internal HD. So it manages it's space and deletions automatically and intelligently.
4. Is TM a good backup software for total recovery or is something like SuperDuper better?
They both have their advantages and disadvantages. Many of us use a clone plus TM. The clone advantage is, of course, being bootable. TM isn't. TM's advantages are the very fast incremental backups (it doesn't have to examine every file and folder to see what's changed): the ability to restore old items; and the ability to restore your entire system to a previous state, even if that's a prior version of Leopard!

Response.EncodingURL - how to use with a # sign

I'm trying run this
response.encodeURL("http://somesite.jsp?message=some sort of message with a # sign")
then when i get to somesite.jsp, and I display the message in a html page, it will only display this: "some sort of message with a "
how do I make it so that everything from the # sign on, will be displayed.
thanks for the help in advance

The Response.encodeURL adds the sessionid to the URL. To encode special characters in the url use:
java.net.URLEncoder.encode
http://java.sun.com/j2se/1.4.2/docs/api/java/net/URLEncoder.html

How to use a better codec.

Hi, guys.
I've installed a codec on my system called "Lagartith", which is said to be completely lossless. I don't know exactly where it lives, but it's in the box somewhere!
I thought it would be handy if I could coax PE7 to use it when encoding my films.
Anyone know how to do this?
Thanks,
Kurt

Haha! I'm not even going to go to that Red Camera link, Hunt, in case I get tempted to mortgage the house!!
Thanks for that in-depth info on codecs. To answer your follow-up question, I wanted to be able to improve the final output using a lossless codec, instead of the PE7 one. Not that I have a clue what PE7 uses, but I figured it probably wasn't completely lossless.
Anyway, I'd best just stick to the defaults for a while before I try to get too fancy.
I should say at this point that I'm a rank amateur, and haven't a clue about much of the secret life of my computer's software. Although I'm not totally ignorant, and I'm probably more computer-literate than most of my friends and family, I'm nevertheless just feeling my way in this field of video editing with a PC. Before this, I used a Mac, with its entry-level suite, and I picked that up quickly.
But having bought a new computer purpose-built and dedicated to all things graphical, I'm having to educate myself pretty quickly! For some odd reason I expected that an upmarket app like PE7 would be a piece of cake and that I'd be able to just set it to cruise control and sit back like Homer Simpson. But I'm discovering otherwise, and actually I'm loving it! It's a challenge to the gray matter.
Cheers,
Kurt.

How to use with a chromebook?

How can I use my printer with a chromebook?

Robert,
You might start here:
Cloud Ready Printers
Using Google Cloud Print with your HP Printer
Reminder: You must have the Google Chrome Web Browser installed on your computer to use Google Cloud Print with a Classic Printer.
From Google: Connect your classic printers with Google Cloud Print
Speculation: Setup may require (or at least work best) using the Chrome browser.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How to use with the "Extension Manager of Dreamweaver"

Hi,
I use dreamweaverCS6.
How can I use the flash software 'swishmax4' from 'Swishnone. com' on dreamweaverCS4 through 'extension manager'.
In case of using another flash program by 'sothink.com', the extension manager created menu folder on the menubar of dreamweaverCS6 on my computer.
And it is very convenient.
How can I extend my dreamweaver to 'swishmax4 in my computer' and create a menu folder?
Please Help Me.
At any rate, HAVE A GOOD TIME, ANYWHERE, ANYTIME, AND WITH ANYONE!

Hi Tulrui,
I am afraid you cannot do it. "swishmax4" is NOT a ZXP or MXP file and it cannot be supported by Extension Manager. It has its own installer, and install the contents to Dreamweaver without Extension Manager, so Extension Manager cannot handle that. You can consult "Swishnone.com" to check if they can provide ZXP extension "swishmax4" for Dreamweaver CS6. Thanks.
Xiaoyi

How long use with BETA drivers

Similar Messages

Maybe you are looking for