How long with the transaction wait.

if i call a program as a background job in a transaction and if the submit program takes long time to come back. will the main transaction wait for the return or will the transaction give time out error.
Regards,
Aruna

yeah sure,
Actually i have a screen on which there is activate button which will go to a  function module which takes the document number and creates the condition records for this document number and return the error messasges into an internal table which i have to write to the log .
This function module is taking so much time in the real time system so i want to make this process as background job.
on creation of the background job i need change the status of the screen from where i called the background job and display a message on the screen saying 'Prices activated'. Could u pls suggest something for this.
Regards,
Aruna

Similar Messages

  • Ipodtouch 4th gen on backorder, how long is the estamated wait

    Hey I recently went online and got a 4th gen iPod touch white, 64gb and it's. Back order...iv been waiting about...a week now so I wanted to know how long is the usual wait for any of you you may have had a similar experiance

    Ask whomever you purchased from.

  • How long should the subscriber wait ?

    I am new to JMS pub/sub. I have read a number of samples. Most of them shows the subscriber uses the onMessage method to wait for publications on the topic that they subscribed to. My understanding is this will wait for ever. My questions is if the subscriber does not specify any expiry for its subscription, it will be active forever. Is there a way for the subscriber to know that the publisher will never publish the topic again or it has been deregistered by the broker due to whatever reason so that it can react to the condition instead of wating forever ? If there is a best practice, will the practice be different between a durable subscriber and a non durable subscriber ?

    The durable and non-durable cases are kinda similar - in both a JVM starts up and a subscriber is created for the lifetime of the JVM unless the code decides to terminate the subscription.
    Typically all JMS clients work like that; a consumer is started and usually used until the JVM closes or some event occurs so that the client closest the subscription.
    There's not usually a big cost with keeping open a subscription. One of the wins of keeping a subscription open is that it can handle the producer coming and going; things remain loosely coupled.
    If you really want to know when a producer starts/stops most JMS providers support advisory messages which you can watch to see when things start/stop.
    http://incubator.apache.org/activemq/Advisory+Message
    Though with advisories you need to keep a subscription open to watch for a new producer starting, so in the grand scheme of things you don't gain that much, unless you are talking about lots of different subscriptions within the same JVM.
    James
    http://logicblaze.com/
    Open Source SOA

  • When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

    When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

    While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value.  Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered.  For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather"  Apple iPhone 6 Case.  The store had plenty of all the other colors, but that specific case and color had sold out that morning. 

  • HT4623 I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

    As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
    Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case)  then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc.  It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
    So again the first step is to find out what is wrong.
    good luck

  • How long is the iPad battery last while watching video on YouTube with 3G?

    How long is the iPad2 battery last while watching video on YouTube with 3G?

    My iPad 2 battery can use only ~7 hours 15mins when surfing the web using cellular data network. Is it normal?
    I would say that's normal. Cellular uses more power than wifi. Your screen brightness is also a factor. Lower the screen brightness & battery will last longer.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • How long does the IPhone5c battery last for without hardly any usage with about 2/3 to 3/4 left?

    How long does the IPhone5c battery last for without hardly any usage with about 2/3 to 3/4 left?
    Has the side affect of charging, where the battery's life gradually decreases overall with each charge, been fixed ?

    Eric,
    They did say 12-14 hours, but as is always the case with such estimates, they invariably quote the 'best possible scenario' and almost never mirror 'real world' conditions.
    If, from a fully charged position, you simply switch on your nano, and set it to continuously play through a long set of songs, with EQ off, backlight off, modest volume (50%) don't touch it during playback, then you might just get somewhere near this figure - and if you don't then it's either not been conditioned properly or it's faulty.
    If you use it like me, daily for a couple of hours, with 2 secs backlight and switch songs regularly, using fairly high volumes then 6-8 hours is more likely. It'll even drain when it's not in use, even in sleep mode, albeit very slowly. They also tend to drain more quickly before they've been through their first few charge cycles (the conditioning period).
    Personally I haven't got a problem with this though I can understand why some people have. It's not very impressive in this respect. Apple should be able to come up with something much better - maybe they should talk to Sony

  • HT4623 Hi!My iPAD lost its charge fast !!I've got an iPAD capacity 57,1GB and it has available 55,1GB ,version 7.0.4 .I'd like to know how long does the battery last when it is 100 % charged.

    Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!

    I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
    I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
    I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
    Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
    Any other ideas?
    Come on, people.
    Thanks,
    Doug

  • How Long Is the Initial Start-Up Sequence of Time Capsule?

    My machine is still showing solid amber after 35+ minutes. I just configured it the first time with AirPort Utility. How long is a normal wait? In the event of what should I do? Thanks.

    Welcome to the discussions!
    Your Time Capsule should restart in 30-40 seconds. A solid amber light is not a good sign.
    You should do a hard reset, re-configure your Time Capsule and restart the unit.
    Hard reset the unit as follows:
    Pull the power cable from the TC
    Hold in the reset button and CONTINUE to hold it in while you plug the power cord back in.
    Release the reset button after 10-15 seconds.
    If the Time Capsule does not restart after you re-configure it, it is likely that you have a defective unit.

  • Just purchased Lion...how long for the install wirelessly?

    Just purchased Lion...how long for the install wirelessly?

    Yes, the installer will launch automatically and wait for you when you wake up to proceed with the Lion installation.
    Good Luck, and remember to back up your data always before installing operating systems or OS patches.

  • FTTC how long after the cabinet is installed and p...

    FTTC how long after the cabinet is installed and populated before orders are accepted?
    My exchange was originally to be FTTC enabled March 2012 then June 2012 then September 2012 then December 2012 and now .... wait for it March 2013. The dates are starting appear somewhat arbitrary. 
    A couple of weeks ago the FTTC cabinet was installed and populated, however just this week the FTTC enable date was pushed back from December 2012 to March 2013. Does it really take another six months after the caninet is installed and populated to enable to sevice?
    I have said with BT and not moved to the likes of Sky or Talk Talk (which would be cheaper and on the face of it offer increased speed) because my exchange was soon to be FTTC enabled.

    the mods only have the same information any one else has
    this link should help you more http://www.superfast-openreach.co.uk/where-and-when/
    It shows your exchange as planned for March 2013
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How long do journaled transactions remain?

    As I understand it, enabling journaling in Mac OS creates a hidden file that somehow tracks and lists every transaction, i.e., file printed, window open or closed, file modified or saved, etc.
    Is this understanding correct? If so, how long do journaled transactions remain in the system? Can they be accessed by the user? Can they be accessed by a computer expert?

    Is this understanding correct?
    No.
    Journaling only applies changes to the file system on the disk. It has nothing to do with printing or opening windows.
    The process of writing (or deleting) a file on disk is very complex. Besides writing the data itself, the system has to choose and allocate the space, update the directory, update the volume table of contents and the volume bitmap, update the Spotlight index, and more. Even if the whole process takes a fraction of a second for a small file, all the steps must be completed, or the file system will be corrupted. The journal is simply a checklist of all the steps. Once the process is successfully completed, the journal entry is deleted. So the entry may only exist for a few seconds or less.
    If the computer crashes or the power goes out before the updates are complete, then when the disk is brought back online, the system will notice an incomplete journal. It will go through the journal and clean up the mess. That doesn't mean it will rescue the file. It is usually too late for that. But it will avoid file system corruption caused by having a partially saved file.

  • ZENCast Update - How long till the next o

    Any idea how long till the next ZENCast update?
    I am still waiting to be able to transfer MP3 files to my ZV:M from inside the program with out it converting them to a Motion JPEG.
    Imagine a podcasting program that can't transfer MP3s to the device it was made for. Crazy I know. I don't want to try the sync stuff again. That never worked for me. I just want to click transfer, decide what I want to copy over, and be done with it.
    There are a lot of nice features I would like to see in it, like adding the recently transfered MP3s to a playlist (say, 'New ZENCasts' (which I currently do manualy)). But the simple ability to tell ZENCast Orgainser (I am an Aussie, we spell it with an 's') not convert MP3s to MJPEG, and just copy them over would be great.

    This still does not address the original message.
    Will there be a way in zencast to transfer an audio cast in it's nati've format into the zen vision:M as it's nati've format, i.e. as an MP3 and not an AVI containing MJPEG?

  • HT5262 How long should the icloud back up take?

    How long should the iCloud back up take? I only have 4gb of storage but it has taken almost an hour already with approximately 2 hours remaining. 

    Hi RMaskery14,
    If you are concerned about the time your iCloud backup is taking, you may find the following article helpful:
    My backup is taking a long time to finish.
    Backing up and restoring takes time, especially if you have a lot of data or a slow connection. Depending on the size of your backup and the speed of your network, you may need more time than expected to complete the process. Using a reliable connection when backing up your device is highly recommended.
    iCloud: Troubleshooting creating an iCloud backup
    http://support.apple.com/kb/ts3992
    Regards,
    - Brenden

Maybe you are looking for

  • No audio when on the internet

    For some reason, there is no audio on my computer. And it only happens when Im on the interenet and not when im offline.

  • How do I find my old playlists?

    My laptop died (motherboard). I have downloaded the newest version (64 bit) of iTunes for my new Windows 7 laptop. I have figured out how to bypass the "file itunes library.itl cannot be read because it was created by a newer version of itunes" error

  • How can I get the values of the selected row in the report?

    Hi All: I have a dynamic query(lexical parameters)that columns are selected at the run time. And depend on the values, I'd like to do another query just for certain row. For example, when I double click on the fifth column of the fifth row. I'd like

  • A problem about CS02 BDC

    Hi, I wrote a bdc about modification BOM's quantity of line item with ECM number. following is code: report ZCS02_BDC        no standard page heading line-size 255. BDC table DATA: t_bdc       LIKE bdcdata  OCCURS 0 WITH HEADER LINE,            t_bdc

  • Sdk 3b Remote Objects not working with java 1.6.29

    So I am not sure if this is java specific or if there is anything in Flex I can do. I am working on a project that communicates with the java back end via the AMF channels / Consumer objects and Remote Objects. Usking SDK 3b In Java 1.6.26 and java 1