How make to know when the attachment file display its visible or hidden

Hi guys,
sorry for my english.
In my scenario I have two button for open or close the attachment file display with the script 'app.execMenuItem("ShowHideFileAttachment");'.
But i don't know when the attachment file display its visible or hidden or detect when the user clicks on show/hidden in the display.
Anybody knows?
Thanks in advance.
ZAMPAZAMPA.

Thanks radzmar,
You help me a lot, but how i make to ask to pdf is it panel of attachment its open?
I make this:
event.target.viewState == {overViewMode:7}
but return false all the time when panel of attachment its open and when its close.
ZAMPAZAMPA.

Similar Messages

  • HT1459 My I pod is not responding  how do I know when the ipod had actually died?????

    my ipod has the green lights however when i try to listen to music ....nothing ....i tried several head sets. how do i know when the ipod is finally dead

    Read the manual for a solution - iPod Manuals

  • How do we know, when the service contract is last modified ?

    How do we know, when the service contract is last modified and by whom ?
    thanks
    siva
    Edited by: sivapara on Nov 24, 2008 3:14 PM

    To add also in OKC_K_HISTORY_B for some actions.
    Thanks
    Nagamohan

  • How do you know when the music is synced to an ipod classic? I don't see it showing it in the window.

    how do you know when the music is synced to the ipod?the lod version would show it syncing in the window at the top of the screen this version doesn't.

    If you have access to a Mac couldn't you receive your verification via iMessage and work to view you iCloud Account?

  • How do I know when the buffer flushed all the data out?

    I am using a very high sampling rate (500000 Hz) and acquire 1024 data points continuously.   It takes 370000 data points in 10 second.   I use a counter to help with the retrigger PFI line.   I have a huge buffer so that I can make sure that the buffer is not overflowed.  The code is attached below.  My problem is that the data acquisition is done so fast (in 10 seconds)  but the processing of the data is not.  In :nEvent, I basically save and plot the data.  The saving process is not slow.   However, our videocard is so SSSSLOOOW and can not keep up with realtime data display.    After the user is done collecting the data, they do not want to wait for the screen to plot the data from the buffer.   So after the data collection is done, I basically stop the plotting process but we still need to flush the data out from the buffer for saving.  My question is that how can I tell when the buffer is empty.
    Thanks,
    Yajai
    m_task = std::auto_ptr<CNiDAQmxTask>(new CNiDAQmxTask("aiTask"));
    m_counter = std::auto_ptr<CNiDAQmxTask>(new CNiDAQmxTask("coTask"));
    m_task->Stream.Timeout = -1;
    //Create a channel
    m_task->AIChannels.CreateVoltageChannel(physicalChannel, "",
    static_cast<DAQmxAITerminalConfiguration>(DAQmxAITerminalConfigurationRse), minimum, maximum,
    DAQmxAIVoltageUnitsVolts);
    m_task->Timing.ConfigureSampleClock(counterSource, sampleRate,DAQmxSampleClockActiveEdgeRising,DAQmxSampleQuantityModeContinuousSamples, samplesPerChannel);
    m_task->Stream.Buffer.InputBufferSize = samplesPerChannel * 2000;
    m_counter->COChannels.CreatePulseChannelFrequency(counterChannel, "coChannel", DAQmxCOPulseFrequencyUnitsHertz, DAQmxCOPulseIdleStateLow, 0, sampleRate, 0.5);
    m_counter->Timing.ConfigureImplicit(DAQmxSampleQuantityModeFiniteSamples, samplesPerChannel);
    m_task->Control(DAQmxTaskVerify);
    m_counter->Control(DAQmxTaskVerify);
    m_counter->Triggers.StartTrigger.ConfigureDigitalEdgeTrigger(
    referenceTriggerSource, DAQmxDigitalEdgeStartTriggerEdgeRising);
    m_counter->Triggers.StartTrigger.Retriggerable = true;
    m_taskRunning = true;
    m_counter->Start();
    // Set up the graph
    m_Graph.Plots.RemoveAll();
    for (unsigned int i = 0; i < m_task->AIChannels.Count; i++)
    m_Graph.Plots.Add();
    m_Graph.Plots.Item(i+1).LineColor = m_colors[i % 8];
    // Create Multi-channel Reader
    m_reader = std::auto_ptr<CNiDAQmxAnalogMultiChannelReader>(new CNiDAQmxAnalogMultiChannelReader(m_task->Stream));
    m_reader->InstallEventHandler(*this, OnEvent);
    m_reader->ReadMultiSampleAsync(samplesPerChannel, m_data);

    Yajai,
    I'm a little confused about your acquisiton. Do you intend for it to be
    finite, or continuous? I'm also unclear about your rates. You state
    that you are acquiring 1024 samples at 500kHz, yet you get only 370k
    samples in 10 seconds. Are you periodically acquiring 1024 samples at
    500kHz?  Do you do any reads other than the final m_reader->ReadMultiSampleAsync(samplesPerChannel, m_data)? Could you provide the code where you stop the plotting process?
    Thanks,
    Ryan V.
    Ryan Verret
    Product Marketing Engineer
    Signal Generators
    National Instruments

  • How Do You Know When The Zen Touch Is Done Chargi

    I searched through the forums and couldn't find anything on this topic.
    I want to make sure that I don't overcharge my player, while still filling it to its enormous capacity. How will I know when it's done charging?

    On my touch there is a little icon in the upper left corner of the screen showing my battery symbol with a power volt thing over it to show it is charging. This changes back and forth until the charging is done, then there is nothing on the screen at all.
    -mrspike

  • HT1498 How do I know when the rented movie is downloaded

    I will be flying across seas and I want to download several rentals but how do I know when they are download completely to my iPad so once I'm up in the air I can watch them without being connect to the internet.

    There are many ways, such as a gray screen on startup, kernal panics, very slow startup times, etc. These items alone don't always point to a failing HD but are symtoms, also if you hear the HD making a lot of noise, that is a pretty sure sign.
    If you suspect  yours is failing it  would be helpful to tell us the symptoms you are experiencing.
    One thing you can test for is Disk Utilities S.M.A.R.T. status of the HD, if it says anything but Verified then it's failing. However that test alone should be taken with a grain of salt, because a drive can be Verified but still failing.
    If you have ANY doubts about yours, Backup IMMEDIATELY and take the computer to your local Genius Bar or AASP to be tested.

  • My film has not totally downloaded, I did not realise this until it stopped 15 minutes before the end, how do I know when the rented film I have purchased has been fully downloaded. Can I retrieve anyhow

    My film I rented has not fully downloaded I only realised that when it stopped 15 minutes before the end , how do I know when a film has been fully downloaded. Oi would not have thought the film would not have started unless the film was fully downloaded. The film warned me prior to tarting that I only had 48 hours to watch once starting!

    I'm sorry but this is too funny to pass up. 

  • JPopupMenu : how can I know when the mouse leaves the popup?

    Hello,
    I need to know when the mouse leaves a JPopupMenu or more precisely when no items are overlighted. Adding a mouselistener to the popup does not work because the JMenuItems themselves capture the mouse.

    Actually, I added a MouseListener that extends MouseAdapter to the component that owns the popup, and the same MouseListner to the popup itself. I have only overriden the MouseEntered method to let me know that the mouse is no more over a JMenuItem. It's now working fine, but I don't like that kind of programming.....
    I need that to do a toggleButton with a popup menu that would remember the last item selected when the mouse leaves the popup. (Because once a choice is made, the selected "tool" appears as an icon in the button and that icon is updated when the items of the popup are overlighted. So that when the mouse leaves the popup, the selected tool has to reappear as an icon in the button and the associated item has to be armed.)

  • How to make an email when the pps file is on the desktop?

    I know how to add jpegs, pps, wmv, etc when using Safari - (and it works) - but when I use the same procedure for Firefox it says "Temporary scanning unavailable for the file" in a pink bar across the monitor. Recently bought all the software for my new 27" iMac to be able to read (and hear) pps files, but have not been able to make a clean email when the file is on the desktop.

    Can you explain what you did right before you got the message?
    For example, did you try to attach the file to an email message on a particular webmail site (e.g., GMail, Yahoo Mail, Hotmail)?
    Do you have any security add-ons, such as toolbars, integrated with Firefox (check Tools > Add-ons)?

  • How do you know when the person that you've shared the file with has downloaded the file?

    After the person get the email that says "I am sharing these files with you.   Click on the image below to view or download your file.", how do you know that they've viewed or downloaded the file?  Do you get an email message or is there something in the shared status that lets you know?

    Thank you for your post. Although this is a feature for Buzzword, right now it's not possible to know if someone has viewed a file you've sent via Share. We are working to integrate Share/My Files/Buzzword so that this will be corrected in future.
    Let me know if you have additional questions.
    Michelle

  • How can I know when the laptop was last used?

    I left my laptop at the office, which is also my parents' house over the weekend. How can I know if someone else had used it while I was gone? Is there a log somewhere I can read or check?

    Console.app and check your browser(s) history. 

  • How do i know when the 30 days is over?

    We got the Cloud through work and only want it for a couple computers after the first 30 days. How can I check on the status of where we are at within the 30 days?

    Hi chrisrenn ,
    As you launch the software it will show you remaining days left for trial.
    Regards,
    Romit Sinha

  • AS2 - coding one mc to another. How do we know when the first has finished

    _root.object_1.sunny.gotoAndPlay("walk");
    _root.object_1.sunny.gotoAndPlay("laugh");
    Hi, I code the following. But it jumps straight to the seconf mc "laugh". Is there nbo way of playing walk and on finishing playing laugh.
    Cheers

    Hi guys.
    THANKS for the answers. They are very helpful. However, one of the problems is it is very difficult to convety exactly what we are asking for in these forums.
    I am NOT a programmer but I do know what I need. These answers were very helpful in the learning process as you guys are REAL pros. I have ended up with a mixture.
    On each frame on the Timeline I write the instructions ie: Frame 1:_root.sunny.gotoAndPlay("speak) then on Frame 2:_root.sunny.gotoAndPlay("laugh).
    The key is to write on the last frame of the nested mcs: _root.nextFrame(); in this way I don't need to write a specific instruction inside the nested mc ONLY on the main timeline and therefore keep the code really "clean".
    It serves as a GREAT template to create movie scenes. I have seen this information asked for on many sites but with inadequate answers given.
    I hope this serves as a great lesson for other NON pros but with serious projects.People are still using the main timeline to tween between key frames when they could be using AS. It's ridiculous but NOBODY seems to teach it well. Not even good sites like cartoon smart etc...
    Thankyou guys.

  • How do I know when the battery is fully charged?

    I use my computer to charge it, but there's never any indication that it's fully charged, so whenever I take it off, it's just a guess, and I'd like to get the maximum battery life possibly out of a charge. Any way to tell?

    Don't rely on the icon to indicate battery issues. It is trying to predict how long your iPod will run under the current operating conditions (as I understand things), so it is not so much of a gas gauge as a range indicator.
    If the indicator is not all the way up to the tippy top, I wouldn't sweat it. Keep track of how long your iPod plays - that's the real indicator of battery condition.

Maybe you are looking for