How manage materialized view, materialized view logs and db links in Server explorer and Oracle Database Proyect

Hi,
We have installed Oracle 12c Oracle Developer Tools for Visual Studio (Visual Studio is 2010 edition). With this tool we can manage tables, views, etc... but we also need to manage more database objects such as materialized views, materialized view logs and db links.
Is there any option to manage this object from Server Explorer and to add the script in the Database Project? At the same time, the schema compare tools does not include this object types. Is there any option to compare them?
Thanks.

As you noticed, not all database objects are available in Server Explorer, and because of this they can't have scripts generated for them, nor can they be compared with Schema Compare.
In a pinch, you should be able to use SQL Developer to do this.

Similar Messages

I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get

I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get my music and don't even see available downloads in the iTunes Store

Check this link, http://www.apple.com/support/itunes/ and go to the contact page.
Sorry, here you go https://ssl.apple.com/emea/support/itunes/contact.html
Message was edited by: ChrisJ4203

How to store and retrieve blob data type in/from oracle database using JSP

how to store and retrieve blob data type in/from oracle database using JSP and not using servlet
thanks

JSP? Why?
start here: [http://java.sun.com/developer/onlineTraining/JSPIntro/contents.html]

How to migrate an existing Microsoft SSIS deployment if it is decided to replace SQL Server with an Oracle database?

Hi Oracle Gurus!
Currently, I am designing an ETL solution that transforms and loads a lot of data from flat files and sends it to an SQL Server 2008 R2 database for storage. However, at a future point of time, it may be decided to add or even replace SQL Server with an Oracle 11g database.
Currently, I am writing script transforms in C# to dynamically generate SSIS packages to tansform and load the data into SQL Server. But considering that in future, an Oracle 11g or 12c database might be added to, or replace the SQL Server database, how do I make my script transforms (or whatever else I am developing currently for SQL Server) reusable to the extent possible?
Or more precisely, what steps do I take, from an Oracle point of view, to ensure that any future migration of data to an Oracle database would be smooth to the extent possible?
Looking up to my Oracle Gurus for enlightenment in this matter!
Novice Kid

When you're writing your on C# code to load data into the SQL Server you have to modify the routines so that they will work with Oracle.
One approach is to use the extproc agent which would allow you to directly call external programs with all the logic in it to perform the load of your files and to put the data into the Oracle database. Another option would be to use utl_file package (or equivalents) which will allow you to open external files from your Oracle database and to directly read its content and then to pass it to the related tables.

I work at a rent to own place. i repoed an ipad 2 and its linked to the customer and i have no contact with them. anyway to reset and bypass this?

i work at a rent to own place. i repoed an ipad 2 and its linked to the customer and i have no contact with them. anyway to reset and bypass this?

Nope.
The Apple ID and Password that was Originally used to Activate the iDevice is required
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

HT4436 Our family iPads and iPhones and all linked to the cloud and all the "switches" in settings are turned on...so why for example can't I see on my device any of the photos my wife has taken on her device?

Our family iPads and iPhones and all linked to the cloud and all the "switches" in settings are turned on...so why for example can't I see on my device any of the photos my wife has taken on her device?

Are they all using the same AppleID?
Photo Stream - http://www.apple.com/icloud/features/photo-stream.html
iCloud: Photo Stream FAQ - http://support.apple.com/kb/HT4486

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

Hello,
I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.
I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
How can implement this for this sending outgoing faxes as well?
I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server.
Any help is appreciated. Thanks!

Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
The article is so easy to understand with detail procedure and guideliness
Exchange Queries

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

How do I turn off a shortcut that says "Open in Internet Explorer" and default back to FF

I use FF as my default browser. A few shortcuts work better in IE so I select the option to "Open in Internet Explorer" and this works fine. Now I would like to undo one of these shortcuts and have it open in FF per the original. I tried to delete the shortcut but any new FF shortcut to that website automatically opens in IE.
How do I cancel that original transfer to IE so it will again open in FF?

Hi roblsmith, 
i am sorry for the previous post which was not well stated. Change the application in the Target field. It is on the left of the URL that you wish to open. You should have something like: 
“C:\Program Files\Mozilla Firefox\firefox.exe” http://url_you_want 
Hope that helped!

No event logs when RAID fails in Server 2008 and R2

From what I'm finding out (by web searching) they forgot to include event logging in Server 2008 for when a Windows software RAID fails in some way such as missing disk, failed redundancy, etc. This is REALLY annoying as I was trying to setup email notifications
for when this happens so I can fix it. I'm just using this on my servers at home, so I'm not big on the idea of spending a lot of money on a hardware RAID, it just does some simple network file sharing and streaming and software RAID is fine. Is there anyway
to get this to work properly, like it used to?! Hotfix? Sacrifice a small animal? Free third-party tools that would work if nothing else? Would a MOM server be able to notify me? (been considering setting up one of those and SCCM to mess with)

Thanks guys for chiming in. The only way Microsoft will know this is a big deal (you would think they would, but apparently not), is for people to complain. I found this out myself when I was trying to set up event triggered tasks to email on low disk space
and RAID failure, only to find no events are created on RAID failures!
I have setup a SCOM 2007 R2 server in my testing environment. It registers and alerts me for low disk space just fine, but the availability monitor is not tripped when I break a RAID volume. I have tried offlining a disk, which results in failed redundancy,
and also shutting down the VM and removing a drive, and neither seems to trip an alert. Do I have to do something to get it to monitor correctly?

Getting List of SQL server and on selection of server get List of Databases using SMO

Hi,
I need to have functionality where I need to populate List of available SQL servers from local network, and when i select SQL server from list, get the list of Databases from that Server.
For this i referenced SQL SMO Dll's and placed two drop down, one lists Server names, and one lists Database names.
Dlls refered are:
Microsoft.SqlServer.ConnectionInfo.dll
Microsoft.SqlServer.Management.Sdk.Sfc.dll
Microsoft.SqlServer.Smo.dll
Microsoft.SqlServer.SqlClrProvider.dll
Microsoft.SqlServer.SqlEnum.dll
Above DLL's i have copied from SQL server SQL server 2008 installed location
C:\Program Files\Microsoft SQL Server\110\SDK\Assemblies
DLL version : 11.0.3000.0
Code i have used is:
private void MainForm_Load(object sender,
EventArgs e)
   DataTable dataTable = SmoApplication.EnumAvailableSqlServers(false);
   cmbServers.ValueMember = "Name";
   cmbServers.DataSource = dataTable;
//Now, load Databases on selection of Server combo box.
private void cmbServers_SelectedIndexChanged(object sender,
EventArgs e)
   cmbDatabases.Items.Clear();
   if (cmbServers.SelectedIndex != -1)
      string serverName = cmbServers.SelectedValue.ToString();
      Server server = new Server(serverName);
      try
         foreach (Database database in server.Databases)
            cmbDatabases.Items.Add(database.Name);
      catch (Exception ex)
         string exception = ex.Message;
It works where SQL server is installed, but in systems where no SQL server is installed, it is not working, it is not returning list of SQL server and so database list.
Query is> can you please help me in this regard, what i am missing here, do i need to install any client component to use this?, or anything else what i need to do to make this functionality work.
Thanks,
Hemal

Thanks Michael for replying.
I have gone through the reply, and the link on how to get the SMO library installed.
"To install the Client Tooks SDK without installing SQL Server, install Shared Management Objects from the SQL Server feature pack.
If you want to ensure that SQL Server Management Objects is installed on a computer that will run your application, you can use the Shared Management Objects .msi in the SQL Server feature pack."
I have few questions on "Shared Management Objects .msi"
Where do i get "Shared Management Objects .msi".
only installing this msi will install SMO?.
Can i ship this msi with my application installer?
do i need to install x86 on x86 system and x64 version of msi in x64 system, or x86 can work fine with both, my application
is x86 only.
Thanks,
Hemal

I was emailed my user name, then a password and reset link, I reset password, and I still can't login. Please help.

Along with the above info, I can't log in on the mozilla support website to post a question. Not really any more information, other than 18.0.2, Windows 7 Home Premium, x64.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

How to set up new MBP to use D-Link print server

New to Mac. MBP found 2 of my 3 printers right away. Tried manually configuring the 3rd which is an older HP Laserjet 1320 connected via USB to a D-Link print server. In Win you config using the IP address and port name. Configuration appeared to work but nothing gets sent to printer. If this is an easy fix I would like to go that route but if the print server hardware is too old please suggest good alternative that will work for both Windows and Mac systems as I have both in the house.
Thanks

I was able to resolve this by rebooting the print server.

I can open a certain link in Internet Explorer and see all the information but when I open it in Firefox I get the HTML. Is there a setting I need to change in Firefox?

I created HTML for a document and wanted to use it as HELP. When I open the index in Internet Explorer it takes me to the various topics and I can see everything I need to see in a nice format. HOWEVER, when I try to open it in Mozilla I get html code.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How manage materialized view, materialized view logs and db links in Server explorer and Oracle Database Proyect

Similar Messages

Maybe you are looking for