How manually remove a DP in SCCM 2007 ?

Hello,
we had a disaster and our old SCCM 2007 site server is dead.
We already have a SCCM 2012 site server up and running and a old SCCM 2007 distribution point still up.
we need to convert the old DP to a 2012 DP.
How can i manually remove the DP from SCCM 2007 without an access to the console, site server, bd, etc...?
On the DP, Can I just remove all the share and permission?
thanks

If you don't use the 2007 environment any more you can delete the old shares and folders.

Similar Messages

How to migrate the computers from SCCM 2007 to SCCM 2012

Hello,
Could anyone tell me how to mirgrate the computers present in SCCM 2007 to SCCM 2012.
Does the "collection migration" job migrate the computers or devices present in the collection? I tried this but computers were not migrated.
Should we again discover the computers in SCCM 2012?
Thanks,
SreehariG

There is no migration job in CM12 that will migrate CM07 clients. You need to install CM12 agent on your CM07 client in order to migrate them. During the installation the existing CM07 client will be uninstalled. You can use any supported
client deployment methods to migrate to your new CM12 environment. More information here:
http://social.technet.microsoft.com/Forums/en-US/configmanagermigration/thread/71175a47-22fe-4284-871c-834c0c999075

How to list All Printers in SCCM 2007 operation manager

Hi,
I would like to get all the printers list from my domain. We have SCCM 2007 I have created the reports from Reporting option.by setting up the the below script.
SELECT * FROM v_GS_PRINTER_DEVICE SELECT A.Name0, A.UserName0, B.Name0, B.DriverName0, B.Location0, B.PortName0, B.ShareName0
FROM v_GS_COMPUTER_SYSTEM A, v_GS_PRINTER_DEVICE B
WHERE
A.ResourceID = B.ResourceID
AND B.Name0 != 'Microsoft Office Document Image Writer'
AND B.Name0 != 'Adobe PDF'
AND B.Name0 != 'Microsoft XPS Document Writer'
AND B.Name0 != 'PDF-XChange 3.0'
AND B.DriverName0 != 'Microsoft Shared Fax Driver'
AND B.DriverName0 != 'pdfFactory 2'
AND B.DriverName0 != 'CutePDF Writer'
ORDER BY A.Name0
It gives me below error.
Report Name:
All_Printers
Category:
Device Management
Comment:
Parameters:
All_Printers
<form action="report.asp" method="post" name="frmReport" style="margin-margin-bottom:0px;" tabindex="-1">
An error occurred when the report was run. The details are as follows:
Invalid column name 'Name0'.
Error Number:
-2147217900
Source:
Microsoft OLE DB Provider for SQL Server
Native Error:
207
</form>
Please let me know what is wrong with this. Pls correct or provide step by step guide to work.
Pls help.

SELECT Distinct SYS.Netbios_Name0, PRINTER.Name0, PRINTER.DeviceID0, PRINTER.DriverName0, PRINTER.PortName0
FROM v_R_System SYS
JOIN v_GS_PRINTER_DEVICE PRINTER ON SYS.ResourceID = PRINTER.ResourceID
Where SYS.Netbios_Name0 LIKE @variable
ORDER BY SYS.Netbios_Name0, PRINTER.Name0
tried this script as well no luck ??????
What error did you get?
Did you extend your sms_def.mof?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How can I remove the SCCM 2012 client and reinstall SCCM 2007 client on all of our computers

Hello All
We have bit of a problem. Our virtual SCCM 2012 r2 server was deleted and the back solution we had in place keeps failing.
We do have our sccm 2007 server still in place but its only role was imaging as we transferred roles from one to another.
My question is now our support needs to remote into pcs but cant because the CM12 server is gone. How can I remove the 2012 client from all of our companies computers and reinstall the CM07 client so we can remote into computers again.
Thanks in advance!
Phil
Phil Balderos

Run a ccmsetup /uninstall on the clients. You may need to run via PSExec. Then push out the SCCM 2007 client via the 2k7 console.
Cheers
Paul | sccmentor.wordpress.com
Thanks Paul!
I have to do this on over 350 computers and 110 servers. How can I do it on a more massive scale?
Phil Balderos
I would check Torsten's approach first and see if the ccmsetup will uninstall the 2012 version. I'm not sure. Obviously the other way round is fine.
Using PSexec you can script this to call up a txt file of all your servers/computers and run the uninstall.
e.g.
for /f "tokens=*" %a in (computers.txt) do psexec \\%a %WINDIR%\ccmsetup\ccmsetup.exe /uninstall
If your account has privileges on all devices you won't need to add in any username/password credentials. Obviously only devices that are switched on and you have access to will run this.
Cheers
Paul | sccmentor.wordpress.com

SCCM 2012 SP1 - Evil Folders in Reporting Services - What Are They and How to Remove Them

Hello All,
There are a lot of sub-folders in the http://CentralSiteSCCM/ReportServer. They are like:
<dir> Config_Mgr_CEN
<dir> Config_Mgr_CEN.OLD.0
<dir> Config_Mgr_CEN.OLD.1
<dir> Config_Mgr_CEN.OLD.10
<dir> Config_Mgr_CEN.OLD.100
<dir> Config_Mgr_CEN.OLD.1000
Only <dir> Config_Mgr_CEN is properly populated with the correct set of the default folders.
Would you be so kind to advise on:
What are they?
How to remove them?
What to do in order for them not to appear any more?
Thank you very much in advance!

Hi Mike,
I ran into an issue when I did the SP1 upgrade where a majority of our reports were duplicated. I created a script to delete these duplicate reports and I've adjusted it to work for your situation. You can find the original thread here, if you're interested:
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
You'll need to know your SCCM site code and the server name to run this script.
# SCCM2012SP1-RemoveDuplicateSSRSFolders.ps1
# This script will connect to SSRS on a specified server and delete all folders that end with .OLD.*
# Used for SSRS cleanup after SCCM 2012 SP1 installation
# Script must be run from an account that has access to modify the SSRS instance
# 3/22/2013 - Mike Laughlin
# Resources used in writing this script:
# Starting point: http://stackoverflow.com/questions/9178685/change-datasource-of-ssrs-report-with-powershell
# API Documentation: http://msdn.microsoft.com/en-us/library/ms165967%28v=sql.90%29.aspx
# Previous script: http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
# Define variables
$SiteCode = ""
$serverName = ""
# Set the value of $noConfirm to $True only if you don't want to manually confirm folder deletion. Use with caution.
$noConfirm = $False
# Safeguard
If ( $SiteCode -eq "" -or $serverName -eq "" ) { Write-Host "Enter the required information for the SiteCode and serverName variables before running this script." -ForegroundColor Red -BackgroundColor Black ; Exit }
# Connect to SSRS
$ssrs = New-WebServiceProxy -uri http://$serverName/ReportServer/ReportService2005.asmx?WSDL -UseDefaultCredential
# Get a listing of all folders in SSRS
$reportFolders = $ssrs.ListChildren("/", $True)
# Find all folders containing .OLD.*
$foldersToDelete = $reportFolders | Where { $_.Name -like "ConfigMgr_" + $SiteCode + ".OLD.*"}
# Quit if no folders are found
If ( $foldersToDelete.Count -eq 0 ) { Write-Host "No folders with .OLD.* found. Quitting." ; Exit }
# Show a listing of the folders that will be deleted
Write-Host "The following folders will be deleted from SSRS on" $serverName":`n"
$foldersToDelete.Name
Write-Host "`nTotal number of folders to delete:" $foldersToDelete.Count "`n"
# Get confirmation before deleting if $noConfirm has not been changed
If ( $noConfirm -eq $False )
$userConfirmation = Read-Host "Delete these folders from" $serverName"? Enter Y or N"
If ( $userConfirmation.ToUpper() -ne "Y" ) { Write-Host "Quitting, folders have not been deleted." ; Exit }
# Delete the folders
$deletedFolderCount = 0
Write-Host "Beginning to delete folders now. Please wait."
ForEach ( $folder in $foldersToDelete ) { $ssrs.DeleteItem($folder.Path) ; $deletedFolderCount++ }
Write-Host "Folders have been deleted. Total number of deleted folders:" $deletedFolderCount
Standard disclaimer: While this script worked just fine for me in my environment, I make no guarantees that it will work anywhere else. I've attempted to make this script as user friendly and generic as possible, but it may require slight tweaking to work properly.

How to remove Access 2007 (MDB) project from Team Foundation using VB6/VBA?

Hi,
is there any way how to remove A2007 (MDB) project from Team Foundation using VB6 or VBA? CompactDatabase method doesn't seem to help.
I need to remove back-end MDBs before deploying the whole project. In other words, the MDBs themselves should remain in TF but I'd like to remove their copies that should be deployed (distribution set). I wrote a simple function for compacting MDBs but it
doesn't do the trick. When I compact an MDB in Access 2007 I'm always asked whether I want to remove it from source control.
Thank you very much in advance.

What are the copies you referring?
These are physical copies of local MDB files. I can't (don't want) to deploy MDB files that are handled by source code control (SCC) since those files hold information about SCC (local directory mapping). Users might not understand the message they get when
they open such MDB in Access, eg.:
This database was named 'C:\Projekty\P1\DB\nP01.mdb' but has been moved, copied, or renamed. Source code control features will be disabled.
That's why I want to remove the SCC information from MDB files. The only way I know so far is to use "Compact & Repair database" in MS Access 2007. I'd like to point you to http://msdn.microsoft.com/en-us/library/aa155494%28v=office.10%29.aspx (it's
similar to Access 2007 & Team Foundation):
Using the Compact Database Command
In order to take a database that is under source code control and deliver it to a user, you need a way to cut the database's ties to source code control. When you compact a database that is under source code control, Microsoft Access 2000 prompts you
to remove the database from source code control.
To remove the database from source code control, Microsoft Access simply removes the Visual SourceSafe properties from the Microsoft Access database and its objects.
I would like to remove Access MDBs from SCC programmatically so that I can
significantly reduce time that I spend on deploying the application. In one of our applications there are five back-end MDBs that are under SCC and it takes some time to remove them from
SCC manually. I have to do it anytime we release new version, even for releases that are determined as testing releases for internal testing within our company.
Thank you very much for your time.

SCCM 2007 Won't remove Distribution Points in Site Status

I'm working SCCM 2007 and have removed some orphaned Distribution Points by going through and removing any application assigned to them and then removing the roles under the Site Systems Folder.
The Systems then disappeared from under Site Systems but when I look under Site Status, they're still appearing in the list there and I have no option to delete them.
I've tried following this link (http://myitforum.com/myitforumwp/2012/02/10/removing-old-orphaned-site-systems-from-the-sms-and-configmgr-2007-database/) and changing their replication field from a 0 to -1 which removes them temporarily but they always return
into the Site Status.
I can't see them anywhere else in the console, they're definitely not sited under Site Systems so I'm a bit stuck and have 3 sites saying they're in a Critical State in Site Status because the Orphaned Distribution Points are still appearing there and I
can't see how to remove them.
To clarify, I removed the orphaned Distribution points over a week ago so I doubt it's something like waiting for the system to e them. I've tried rebooting the SCCM server and this has made no difference
My list of servers under Site Systems;
My Servers in Site Status;

Execute the following command on the database
Delete from DPinfo where server name like '%DPName%'
It is completely unsupported to delete anything from the CM07 database. Before doing this you should contact CSS directly for support and ONLY with their guidance should you perform this task.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How to perform a query to read an xml file in SCCM 2007

Good,
I need read knows how to read an csv file for a specific column after collecting the results, then put the PC's in a collection in particular.
A greeting and thanks

Good,
What I want to do is create a query that examine a csv that is on a server. And after consideration and select the column that I am interested
in(Name pc) be able to engage these data to a collection, clear is if it can be done in SCCM 2007
A greeting and thanks

Authorized device was erased. Downloaded iTunes. Says my iPod is already synced to a library. Where do I access that library and how do i get it back on iTunes? I tried manually move songs in disk mode. Bunch of data on ipod, how to remove?

One of my authorized devices was erased. I downloaded iTunes. Says my iPod is already synced to a library. It will allow me transfer purchased songs but not songs I had that were downloaded off of my CD's. Where do I access that library and how do i get it back on iTunes? I tried manually move songs in disk mode. Now I have a bunch of data on ipod and I don't know how to remove it. It basically copied all my itunes files from my C drive onto ipod in my efforts to move the library.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

How do I Manually remove CD when iMac won't boot?

Last night I downloaded several updates. Suddenly my Intel iMac 20 no longer boots up past the grey screen of death. A CD is stuck in the drive so I can't use my Install disk. None of the key commands on boot up work so I can't eject. Tech support had me repeat the steps without any luck. Next step is going to a shop.
Does anyone know how to manually remove a CD from an iMac drive? Any paper clip type trick with these? If I could do that I could try the install disk on boot up.
Thanks,

Yes there is, Google to disassemble iMac, in my case" iMac 24" intel core duo" and you'll see more then one explanation, also with movie, but you'll need some torx tools. And be careful with disassembling the optical drive, to remove the plastic holder it's a bit tricky. Anyway good luck, but there is also a solutions at:< <a class="jive-link-external-small" href="http://">http://www.macyourself.com/2009/05/01/the-ultimate-guide-to-ejec ting-a-stuck-disc-from-mac-superdrive/> look at it BEFORE disassembling your MAC

How to create a deletion of Adobe Acrobat through SCCM 2007

Can anyone give me assistance with creating a deletion package through SCCM 2007 that will remove Adobe Acrobat 8? I've tried the delete switch and msiexec, but doesn't seem to do the trick. Any assistance would be helpful.

Create A batch file
Content:
==============================================================================
@echo off
cls
echo
=================================================
echo Please wait while ....PRODUCT NAME .... is uninstalling
=================================================
Msiexec.exe /x {QUID} /q
::::Replace QUID with quid number ie AC76BA86-1033-ffff-7760-000000000006
==============================================================================
SAVE BATCH FILE IE UNINSTALL.BAT
THEN CREATE PACKAGE IN sccm

SCCM 2007 and SED (Self encrypting HDD) - How do I report on them?

Currently we are moving to a new Encryption software and we have a large amount of workstations with SED hdd - this works brilliant as the encryption time with supported software was brought down from 6 hours to less than 5 min.
My question is how do I distinguish between normal HDD and SED Drives in my environment (the fleet of 4000+ workstations)and report on them in SCCM.
I am getting allot of different topics on to extend my mof files (which voids our support contract) and that its not recommended.
and based on the outcome of my MS how-to call I am not sure that anybody thought of this as there recommendation is to see what software is installed in Programs and Features and report using software reporting, the thing is that its not a type of software
installed that will give you the functionality but the physical HDD type...
Please if someone can provide me with some detail or just give me a nudge in the right direction.
Thank you.

Assuming that the SED has a unique PnP ID (or group of PnP IDs if it's a family of products) in Device Manager, you could scan for their existence that way (using a default SCCM 2007 report to boot). Since the hardware is unique, and I'm assuming
you are doing Hardware Inventory, this is how I'd try and spot them.
David Coulter | http://DCtheGeek.blogspot.com |
@DCtheGeek

How do I manually remove CD from flat screen i-mac

Disc is not showing up on the screen and cannot eject it - have tried all keyboard/eject combos. Reset PRAM, tried eject prompt in terminal - Superdrive appears to be dead. Any suggestion to manually remove the disc? I need to retrieve data on it.

Hi,
Have had same basic problem. Here's how I got the disk out. Go to Application Folder and open Utilities Folder. Then open Disk Utilities. On the left of the screen you'll see a list of your drives including the DVD drive with the disk that is in it. Highlight the disk and click on the eject button at the top of the screen. The disk should come out if the drive has not failed. Good luck. This is a real pain but this worked for me. It's simple once you do it.
Steve

How to remove the parent-child software update point in sccm 2012 sp1

I have a CAS , Primary site server(1) and secondary site servers (7). I have software update point installed on CAS, Primary server and Secondary site servers as well.
I have a situation to reinstall the software update point which is in primary site server.
So, How to reinstall the software update point in primary site server since this is located in the middle between CAS and secondary site servers.
So, please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I have referred few posts on how to remove SUP
https://social.technet.microsoft.com/Forums/en-US/c7258aad-d968-427b-8826-4829916c14c9/remove-and-re-add-software-update-point-sccm-2012?forum=configmanagersdk
and how to install SUP
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-in-a-lab-part-6-deploying-software-updates/

Hi,
>> please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I just tried to reinstall the SUP on the Primary site(only one SUP on Primary site and there is a SUP on Secondary site). The SUP upstream data source of the Secondary site showed empty and greyed out. But the upstream data source resumed after a while.
It seems nothing special needs to be done.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to manually remove artwork in iTunes 12.0.1?

Hi,
I want to remove the artwork from an album. In the previous versions of iTunes, one could simply go to the info page and click the artwork check box and the artwork would be removed. In iTunes 12.0.1 there is not this option. Even if you try to right click on the songs and select "Clear Artwork" it doesn't do anything.
Does anyone know how to manually remove artwork in this version of iTunes?
Thanks so much,

The iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the center of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
tt2

How manually remove a DP in SCCM 2007 ?

Similar Messages

Maybe you are looking for