How many Airport Extremes can I use to create a network?

Hi all.
I've taken to using two of the dual-band Airport Extremes whenever I need to create a wireless network over a larger than usual space, obviously using one as base and using the other to extend the network.
Can I add a third or fourth Apple Airport Extreme to further extend the network?
Thanks

Can I add a third or fourth Apple Airport Extreme to further extend the network?
If you are asking about wireless only extension, it is important to remember that the "extend a wireless network" setup works like the hub and spokes of a wheet. Your "main" AirPort Extreme is the hub and the remotes reside at the end of the spokes.
You can have multiple remotes if you wish, but keep in mind that each remote communicates directly to the hub....not to another remote at the end of another spoke.
For this reason, you want to lcoate the "main" AirPort Exteme as centrally as possible within you home so the extending devices will operate correctly.
If you are asking about extending by connecting the "remote" devices to the "main" AirPort Extreme using an Ethernet cable, you can have as many remotes as you wish....up to about 250.

Similar Messages

  • How Many AirPort Expresses can you use with BaseStatio to Exended Coverage?

    I have the airport Extreme N Base station and have one airport N Express hooked up to get better coverage...
    can I hook up more than 1 express to make a bigger coverage area on my property?
    Thanks

    can I hook up more than 1 express to make a bigger coverage area on my property?
    Yes, but you cannot connect the additional 802.11n base stations in series to extend the range as the 802.11n "extend" feature does not support relays like in a 802.11g WDS.

  • How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

    How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
    What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
    Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

    FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

  • How many airport express can  i install in my home to stream music?

    I plan to buy many airport express in my new Home!
    how many airport express can  i install in my home to stream music?
    Jimmy

    jimmyflo wrote:
    I plan to buy many airport express in my new Home!
    how many airport express can  i install in my home to stream music?
    Theoretically as much as you want but there are technical limitations about the usable bandwidth in the wireless or by the used access point.
    All participants (stations) in a wireless network share the available bandwhith equally and therefore a point will get reached where the throughput in the network became insufficient to stream music.
    Also some routers limit the number of stations could get connected. For instance Apples Airport Extreme have a limit of 50 connected clients and the AP-Express (if used as access point) a limit of 10 simultaneous connections.
    Lupunus

  • How many airport express can be supported by software remote at one time.

    how many airport express can be supported by software remote at one time?
    I mean remote software can control at one time

    Well Apple makes an iOS application called 'Remote' it's used to control iTunes on a Mac, Or to control an Apple TV Multimedia features.
    Apple also makes "AirPort Utility" for iOS. Airport Utility can be used to configure Aiport Extrem, Airport Express And Time Capsul using an iPad, iPhone or iPod Touch. You can use it to connect to one device at a time. While connected to the device you can configure it to work as part of a larger Airport network. If you want to configure muliple device, you would connect to one device,  configure it,  And then connect to the next device, and configure it, and so on and so fourth.
    I haven't found a limit.
    How big of a network are you trying to make?

  • How many lines we can print using Non-alv report list ?

    Hi Experts,
    How many lines we can print using Non-alv report list ?
    regards
    vishnu

    Hi,
    It depends on the page size according to the page size we can set the no. of lines as follows,
    REPORT  program_name   NO STANDARD PAGE HEADING
    LINE-SIZE 290
    LINE-COUNT 65.
    Hope it helps you,
    Regards,
    Abhijit G. Borkar

  • How many apple tvs can i use on one network from one apple account ?

    how many apple tvs can i use on one network from one apple account ?
    if i have 16 in each of my rooms connected to a network switch and a good fiber internet line
    will this work ok from my one account ? or would i neeed a mac book mini with raid storage set up ?
    any help would be very gratfully recived !
    james

    Welcome to the Apple Community.
    Homesharing allows up to 5 computers to be authorised and a total of 10 computers and devices to be associated with a single Apple ID.

  • MM: Purchase requisition line Items - How many line items can we use

    Hi all,
    1. Purchase requisition Line items  (How many line items can we use?), is there any restrictions.
    2. While creating PO with only one tax code for the related PR to input Tax code (without selecting  line Items).
    Regards,
    Sudheer

    Hi
    There is no limitation for number of items in PR.
    Tax code is always applicable for individual item only.It cannot be selected form the whole PO.
    Regards
    Dev

  • HT5219 How many Thunderbolt displays can I use with my MacBook Pro using Windows 7 and  Parrallels?

    How many Thunderbolt displays can I use with my MacBook Pro using Windows 7 and Parallels

    Two. You can daisy-chain two ATD together. Doesn't matter what you're running.
    Clinton

  • How many times i can purchase using a credit card on the day

    how many times i can purchase using a credit card on the day

    That would depend on the company your credit card is with.

  • How many video chats can you use with this server?

    I am looking to develop a multi-video chat app that's easy to
    build. Can I use Stratus with this? Or do I need to use FMS.

    none of the video streams will pass through Stratus. Stratus
    only enables end-to-end streams. You are limited only by the amount
    of bandwidth the client ends have as far as how many different
    streams can be flowing.
    if you need to relay streams through a server (the to-many
    case, or the end-to-end is blocked by firewalls or certain NAT
    configurations cases), you'll need to use FMS.
    -mike

  • How many CPU cores can PS use?

    How many CPU cores can Photoshop CC (version 14.1) use at a max running on Mac OS X Mavericks? I have even looked into the PS tech specs but it only states multicore. Many thanks.

    I am wondering if CC has been further optimised for multi core, because AFAICR these results show more CPU use than the last time I bothered to check.  That would probably have been with CS6
    Image size (1000 pixels square to 10,000 pixels square)
    If memory serves, the lens blur filters made good use of system resources.  This was with Iris Blur
    I tried a few other filters on the 10k pixel image, but couldn't test my system enough to get a meaningful result.  I can hear my GPU fans ramp up with various actions even before I put them to serious use.  (I think the system starts working really early in the process.)
    I am assuming that Apple OS are similar to Windows.  Was there a specific reason you wanted this info, or just out of interest?

  • How many Airport Expresses can you link and still work properly

    How many Airiport Expresses can you link and still work properly.

    It would depend on whether all of these base stations will be interconnected by Ethernet or by wireless and what your goal is with them.
    In a roaming network, where all base stations would be connected by Ethernet, you could have 10+ base stations. Apple has never (at least to me) any limits on the number of base stations that can be used in this type of network.
    In an extended network, where all of the base stations use wireless connections, the practical limit would be 4 or 5 base stations.

  • How many Airport Extreme's and Airport Express can extend line for distance

    I am trying to link multiple AEBS/AE's together to cover a fairly long distance between two houses....Is this possible? I already have the 2 AEBS's linked together between two houses going across a street. However, the link is not that strong and I am seeing packet loss. I am thinking to plug at least one AE in at the far end of the house closest to the window to possibly help get a stronger signal going across the street.
    Would this work? Will it just add too much latency?
    DSL Modem---AEBS-1>>><<<AE>>><<AE>><<<AEBS2---iMac on gigE

    Welcome to the discussion area, 0dB!
    +Would this work?+
    The short answer here would unfortunately be a "no". Read further for explanations.
    If this is a newer AirPort Extreme (AEBS) "n" device and you are using a newer AirPort Express (AX) "n" device, you will not be able to configure the network as you describe. The reason for this is that the AX communicates directly to the main AEBS in the "extend a wireless network configuration". So the setup would look like this:
    Main AEBS > Remote AX.
    That's the limit of this type of setup, although you could have multiple remote devices if you wish. It's like the hub and spoke of a wheel. The AEBS would be the hub and AX would be at the end of a spoke. No further extension is possible from the AX, although you could have several devices communicating to the AEBS if needed.
    Apple's older WDS configuration allows the following:
    Main AEBS > Relay AX > Remote AX.
    That is the limit of this type of setup. Keep in mind that there will be a tremendous loss of performance with this type of setup as follows:
    1) The entire network will operate at "g" level wireless
    2) The bandwidth of the network will drop to only 25% of the original bandwidth
    With WDS, in effect, you will have a "g" wireless network operating at 25% of its normal capability.

  • How many ATV2's can I use with home sharing at once?

    I am installing a fairly large home network. I have 10 ATV2's I would like to use on 1 network using home share, all will be connected via ethernet. Is there a limit to how many atv2's I can have connection one itunes account with home share or a limit using the remote app?

    It used to be a limit of about 5 AppleTVs per iTunes library with AppleTV 1 but that registered them as devices rather than using Home Sharing.
    I suspect but don't know for sure that Home Sharing has to be more liberal as Home Sharing now works to portable devices like iPads too, and if the household had a couple of AppleTV2's, iPhoness and iPads they could reach 5 very quickly.
    Having said that we just don't know.  There is a limit of sharing to 5 computers with Home Sharing, so it's possible the same applies to individual device types, we just don't seem to know from the support docs posted.
    Personally I'd be surprised if 5 was the limit as under the old system if you ran out of 'Devices' in itunes you could set up another computer for the next 5 and so forth.  Home Sharing on the other hand just shares to a particular account so you'd see all libraries shared from a particular account on all AppleTVs.
    AC

Maybe you are looking for

  • Old computer dead, How can I sync my iPhone contents into new computer

    Hi Pro, My old computer dead. But my iPhone was synced with it. when I try to sync it with my new computer, it always ask me to allow it erease my iPhone contains. But that is the the only thing I left. all musics, Voice memos etc. are in iPhone. The

  • IOS 4.2.1 Works for me and many others.

    OK, It may seem trite to others that I would start a thread saying all is fine for me. However, I thought, having read all the negative posts, that maybe some balance was needed here. Install Process: Worked like a charm. All I had to do was make sur

  • Phone freeze, download error and auto factory rese...

    Last Saturday, my 2yr old child was playing with my screen lock lumia. Next thing I see, it display a factory reset. It's ok for me since I sync my data mostly online, not a real damage. But after the factory reset, the main problem happen. It doesn'

  • IChat 4 won't connect (neither will any other IM clients)

    Hi, I tried to login to iChat 4 this morning, and I get this error: Could not connect to AIM (username) The connection could not be completed because it timed out. Try again. I tried again, same error. I also tried Adium and MSN Messenger, and neithe

  • Converting jstring to const char * using JNI

    Hi Folks, Almost complete with the registry access dll and passing to java. My last question is how do I convert a jstring in a const char * ? There may be a method of the JNIEnv that I can use. Can anyone assist? Thanks.