How many APs Can I join a WLC 4402 and WiSM?

I have a WLC with 20 APs joined into the same management VLAN and
I'll deploy other campus with 240 APs and 2 WiSMs Blade.
Is there any recomendation about how many APs Can I put on the same management VLAN?
thanks a lot

Cisco recommends 60 - 100 access points per vlan. Attached is the best pratices document
https://cisco.hosted.jivesoftware.com/docs/DOC-4204

Similar Messages

If I purchase Adobe Standard, how many computers can I install it onto? And is there any way of buy an additional subscription? i.e. if it can only be installed onto two, is it possible to purchase a third installation?

The company I work for are looking to purchase Adobe Standard, how many computers can this be installed onto? We need it on three computers so if it is only possible to install it onto two is it possible to install it onto a third computer without having to buy the software twice?
Thanks

Hi There,
We would like to inform you that you can just activate 2 machines with one subscription, however, you can just use one at a time.
If you wish to use the 3 machine, then, you would have to purchase another subscription with a different email address.
You would need another email address, because the activation is done via email address and more than two activation on 1 email is not possible.
Please revert if you need any more information on this.
Thanks,
Atul Saini

Single 3850(MC) how many AP can control

Hi All now i testing about 3850..
i have some question about 3850
1. how many APs can control in single 3850(MC)
if we buy Single 3850(48port) then can we use all port for AP?
2. build a MC-MA Wireless environment, If MC goes down MA Can still working without MC?(is there kind of NSF?)
3. for example MC has a AP and MA has a AP. then we can see ap only each 3850. how we can management whole APs
Prime infrastructure can see whole APs, is this only way ?. I think this is not good for management Wireless.
4. If MA has over two APs(AP1, AP2), User1 connected AP1, User2 connected AP2.
User1 need to connect with User2(FTP or something) , User1,2 can connect directly? without through of MC
MC-----------------MA
|
AP1 AP2
| |
user1 user2
if you have any answer plz talk to me.
thank you.

A 3850 can support up to 50 directly-connected APs.

AP1252 can´t join on WLC

WLC software 7.2.103.0
1. first problem: AP1252 can´t join on WLC. MAC was add on mac filter properly.
170
Mon Apr 9 15:37:32 2012
Mesh Node '2c:3f:38:be:53:ef' failed to join controller, MAC address not in MAC filter list.
171
Mon Apr 9 15:37:32 2012
AAA Authentication Failure for UserName:2c3f38be53e0 User Type: WLAN USER
172
Mon Apr 9 15:37:32 2012
Coverage hole pre alarm for client[1] 40:a6:d9:ef:87:68 on 802.11b/g interface of AP 2c:3f:38:bf:0c:80 (AP2c3f.38bf.0c80). Hist: 46 7 5 4 2 1 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
173
Mon Apr 9 15:37:32 2012
Coverage hole pre alarm for client[1] 8c:7b:9d:05:a0:67 on 802.11b/g interface of AP 2c:3f:38:bf:0c:80 (AP2c3f.38bf.0c80). Hist: 50 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
174
Mon Apr 9 15:37:30 2012
Interference Profile Failed for Base Radio MAC: 2c:3f:38:bf:1e:40 and slotNo: 0
175
Mon Apr 9 15:37:28 2012
Mesh child node 'd4:d7:48:6d:48:2f' has changed its parent to mesh node '2c:3f:38:bf:ef:60' from mesh node 'd4:d7:48:6c:7d:80'.
176
Mon Apr 9 15:37:28 2012
Mesh Node '2c:3f:38:bf:1d:2f' failed to join controller, MAC address not in MAC filter list.
177
Mon Apr 9 15:37:28 2012
AAA Authentication Failure for UserName:2c3f38bf1d20 User Type: WLAN USER
178
Mon Apr 9 15:37:28 2012
Mesh child node '2c:3f:38:bf:1d:2f' has changed its parent to mesh node 'd4:d7:48:6c:70:e0' from mesh node '2c:3f:38:be:55:00'.
179
Mon Apr 9 15:37:28 2012
Interference Profile Updated to Pass for Base Radio MAC: 2c:3f:38:bf:4b:20 and slotNo: 0
180
Mon Apr 9 15:37:27 2012
Interference Profile Failed for Base Radio MAC: d4:d7:48:6c:81:60 and slotNo: 0
Several APs can´t join on WLC and all are added on MAC filter, but they are showing this messages.
2 . Second problem.: Operational Status = UNKNOWN
Some Access Point are in UNKNOWN status. I tried but I can´t do the reboot.
I can access Web config the APs using WLC, but when I applied the reset, it wasn´t working properly.

Murlio:
Is the AP model 1522 or 1252? I think you mean outdoor AP 1522 (which needs a mac filter). right?
please double check the mac filter you added. Try to delete then add it again if necessary.
it is obvious that it is a mac filter problem. be sure that you add the correct mac address and it is written correctly with the correct format and the mac filter created for "any WLAN" and the interface Name is "management".
Hope this will solve the issue.
Amjad

How many times can you resend an iTunes Gift Card?

Tried sending an iTunes gift card to a @facebook account but the recipient hasn't received it.
Is it possible to send to another of their @facebook accounts and if that also fails then to a conventional account?
I guess my question is how many times can you resend on Gift Card and to how many different email accounts?

To use an iTune Gift Card to buy books...
Open iTunes on your computer and click on the iTunes Store.
You'll need to be signed in...
Click on the little House icon in the dark gray bar across the top. (or Shift+Command+H)
On the right side of the page under Quick Links click Redeem and enter your code.
Then it will show your credit balance in the dark gray bar across the top next to your account name to let you know how much you have to spend.
Then as you buy books, it'll deduct from the credit balanace.
There is a distinction between, iTunes Gift Card and Apple Gift Card.
Apple Gift Card: can be used to purchase Apple hardware and accessories at any Apple Retail Store, the Apple Online Store...
iTunes Gift Card: To give music, movies, TV shows, apps, books, or anything on the iTunes Store, the App Store, the iBooks Store or the Mac App Store, select an iTunes Gift Card

How many pcs can wirelessly connect to an Officejet P1102w printer

What limits how many separate PCs can connect to an Office Jet P1102w. Is there a limit in the printer or is the limit more likely to be in the router?

Hi KiamaraKid,
I understand you have a Laserjet P1102W printer and are wanting to know whether there is a limit on the printer as to how many computers can connect via network, or if the limitation would be on the router's end. I will do my best to help you with this issue.
With our HP printers wireless performance depends on physical environment and distance from the access point (router). Wireless operations are compatible with 2.4 GHz routers only as well. So the short answer is that the limitation is mainly on the router.
If you can get back to me with the router make and model, I will certainly see what I can find for you about it's limitations (meaning, how many computers can connect successfully to the router and thus the printer).
Hope this helps! Have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

How many iPods can listen to iTunes Content?

If I have 1 instance of iTunes running on my PC, how many iPods can I connect to the PC and pull playlists from? (i.e. - I have 1 pc running iTunes, and I have 3 different iPods... will they all be able to work and listen to the music I have purchased?)

There is no limit to the number of iPods you can dock to 1 computer. I use both my video iPod & shuffle on 1 computer. You are confusing the limit of 5 authorized computers to play purchased content from the iTunes store which has nothing to do with the # of iPods.

How many devices can I put my PSE on?

If I purchase the software, how many computers can I put PSE on?

And if one of my laptops doesn't have a DVD drive, can I download and use the serial number?

How many meetings can be opened by one account at the same time?

I've tried Adobe Connect trial version.
There are few questions about the product.
1.How many meetings can be opened by one account at the same time?
   I could open 9meetings at the same time using other PCs. What is the limit?
2.What is the maximum of students in a meeting?
   I'm thinking of buying monthly/Individual product.
3.The meeting never end even though host is out of it. But we want to control.
   Can host close a meeting so that all participants are out of the session?
Thanks for your attention.

This depends on your licensing.
If you are using a Named Host license, then you can open one meeting at a time. If other members of the Meeting Host group are present in a room, then it should allow you to have multiple rooms open, one for each Meeting Host licensing being used.
If you are using the Concurrent Learner license, then each meeting you join uses a different licenses, so as long as you have concurrent seats available, you can open as many rooms as you want/need.
Maximum number of attendees (students) would be your room's concurrent maximum, less your self. The monthly version of Connect offers 25 concurrent attendees in each room, so that would be 24 students and you.
The meeting does end after it is dormant (no host) for ~15 min, however you can use the End Meeting function (Meeting > End Meeting) to close the meeting and remove everyone, including yourself, from the room.

How many clients can connect through cisco AP 1310 in wireless network ?

I had setup wireless network with
wlc4402,cisco AP 1310.1131 and 1242 and Cisco acs 4.1.My problem is only 30 clients connect through Cisco AP 1310 at a time.I can not connect more than 30 clients at a time.What is the issue in wireless network?please reply .
Thanks and regards
By
D.Anbudurai

WIRELESS > 802.11 > RRM
How can do that setting ? Can you reply with
some brief steps? And also I want to know how
many clients can connect in wireless network at
a time exactly through cisco aps?
Thanks and regards
d.anbudurai

How many applications can be installed?

I have a medical users that uses Epocrates, Tarascan, Clinical Consult, and Sandoth.
The phone 8330 gets slowed down and I am assuming this is a memory problem. So i need to confirm this so i can recommend a diferrent platform for her if necessary.
How many apps can be loaded in addition to the stock apps?
Thanks.

Hi and Welcome to the Forums!
Sorry, but there really is no number that can be given in answer. It is a function of the size of the apps that are installed...larger apps will result in fewer total being able to be installed. Smaller apps will result in a larger quantity. There's no way to say what that number is since it's not fixed. Here's an article that discusses qualifying low memory situations:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
Perhaps it'll be helpful in your evaluation.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

APs don't join new WLC

Hi all,
I had to changed our WLC due a RMA. Now the APs don't join the WLC:
spamApTask0: Mar 07 14:58:25.789: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:da:37: Failed to create DTLS connection for AP 10:169:2:171 (15781).*spamApTask6: Mar 07 14:58:25.582: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:e3:85: Failed to create DTLS connection for AP 10:169:2:147 (15930).*spamApTask6: Mar 07 14:58:25.527: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:e3:a3: Failed to create DTLS connection for AP 10:169:2:145 (15932).*spamApTask3: Mar 07 14:58:25.193: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:57:b2:63: Failed to create DTLS connection for AP 10:169:2:160 (31527).*spamApTask5: Mar 07 14:58:25.117: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:da:2b: Failed to create DTLS connection for AP 10:169:2:167 (15780).*spamApTask0: Mar 07 14:58:24.971: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:e3:d1: Failed to create DTLS connection for AP 10:169:2:177 (15935).*spamApTask7: Mar 07 14:58:24.516: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:57:b2:f9: Failed to create DTLS connection for AP 10:169:2:142 (31537).*spamApTask4: Mar 07 14:58:24.345: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:57:bb:fb: Failed to create DTLS connection for AP 10:169:2:153 (31680).*spamApTask0: Mar 07 14:58:23.737: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:da:37: Failed to create DTLS connection for AP 10:169:2:171 (15781).*spamApTask6: Mar 07 14:58:23.535: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:e3:85: Failed to create DTLS connection for AP 10:169:2:147 (15930).
The only way that I found to solve it has been perform a reset factory default on APs. Unfortunately the APs have not SSH, TELNET or HTTP access enabled and I haven't physical access to all the APs.
Are there some other way to solve thas?

Hi Joan,
spamApTask0: Mar 07 14:58:25.789: #CAPWAP-3-DTLS_DB_ERR: capwap_ac_sm.c:7305 4c:4e:35:b3:da:37: Failed to create DTLS connection for AP 10:169:2:171 (15781).
As per logs this is the problem related to Certificate. Make sure that time setting on WLC is correct and updated.
means Unable to create the DTLS database entry for the AP.
Can you paste more info:
From WLC: Sh sysinfo
From AP: sh version
Also paste the entire bootup process from AP console.
Scott is right , for this kind of things you must raise a TAC case.
Regards
Dont forget to rate helpful posts

How many columns can be used in the SELECT Statment

Hi all,
How many columns can be used in the SELECT statement?
Ex: SELECT x1,x2,....xn FROM <table_name>;
Thanks,
GowriShankar.N

Let me join ;-)
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Linux: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL> DECLARE
2 l_sql varchar2(32000);
3 begin
4 l_sql := 'CREATE TABLE T(';
5 for i in 1..999 loop
6 l_sql := l_sql ||'C'||i||' NUMBER,
7 ';
8 end loop;
9 l_sql := l_sql||'C1000 NUMBER)';
10 EXECUTE IMMEDIATE l_sql;
11 end;
12 /
PL/SQL procedure successfully completed.
SQL> select count(*) from cols where table_name = 'T';
COUNT(*)
      1000
SQL> insert into t(c1) values(1);
1 row created.
SQL> select *
2 from t t1,t t2;
        C1         C2         C3         C4         C5         C6         C7         C8         C9
...   snipped
C991        C992       C993       C994       C995       C996       C997       C998       C999         C1         C2         C3       C4         C5         C6         C7         C8         C9        C10
...   snipped
C990       C991       C992       C993    C994        C995       C996       C997       C998       C999
---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------          1
                                                                                                                                    1
SQL>
SQL> select count(*) from (
2 select * from t t1,t t2)
3 ;
select * from t t1,t t2)
ERROR at line 2:
ORA-01792: maximum number of columns in a table or view is 1000Obviously, inline view is obliged the same restrictions as a view, but select list is not constrained.
Best regards
Maxim

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How many times can I review my account ?????????

I have reviewed my account three times with my PayPal info and received confirmation from my PayPal Account but it still won't let me log in. It wants me to review EVERY time. Let me know if anyone can shed some light on this problem.
This is a REAL PAIN.
Thanks, Andy

Lfc89 wrote:
How many times can I change my country or region on my ipad 2 or iPod touch 5
Not sure what you are asking... but...
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region

How many APs Can I join a WLC 4402 and WiSM?

Similar Messages

Maybe you are looking for