How many audio CD's can I burn?
So, I took the plunge yesterday and bought my first music store tracks. Now have a few questions (I suppose logically I should have looked for the answers first but I just wanted to try it anyway
Most of all I'd like to know, is there a restriction on the number of audio CD's I can burn? I've read 7 in a couple of posts but can find absolutely zilch in Apple's support about this. Must say, I find it a bit of a cheek if there is a restriction. It's my music now, afterall !!! I just hope the whole point of not allowing you to burn from Toast anymore, but only from iTunes is to remove this need to limit burning?
Which leads me to my next question; this thing about only burning from iTunes now... is that a restriction set by Toast or by Quicktime? Or both? Because I read somewhere that QT7 prevents you from burning. Somewhere else I read you can still burn using Toast 6.0.1.
And finally a question about quality. This is something I've been struggling with for a long time and my library has become chaos as far as encoding is concerned. I just can't decide. To me 192 bit MP3 sounds fine, as does 128 bit AAC (Music Store). But everywhere I read people seem obsessed with seemingly huge bitrates always rubbishing these so called "high-quality" settings. So being the gullable person I am I've started believing too much of what I've read and become paranoid that 128 bit AAC just doesn't cut it.
Thing is, for a long time I went along with the old addage "if it sounds good for you..." but I'd like to start taking my powerbook out with me DJ-ing (private parties, small venues) as I'm fed up of lugging vinyl about, not to mention people who don't have record players anymore . But are music store files gonna sound bad over a small/med sized sound-system? Or am I just being scared by a few audiophiles who hang out in recording studios 12 hours a day and for all their trained hearing have forgotten what the layman hears (or doesn't hear)?!? Because if the answer really is "forget it, it'll sound awfull" then I really need to question the point of buying from the music store.
Thanks in advance for your opinions...
Rich,
Sounds like you have your answer as far as the number of times you can burn a playlist with protected music in it. Keep in mind that if you alter the playlist you can get another 7 burns in.
By the way, just because you buy a CD or "Tune" doesn't make it "yours." How would you feel if you produced a track, went through a copyright process, and everyone who paid $1 for it had legal rights to it? Yes you own a copy of others music but it doesn't give you the right to mass produce it and/or distribute or sell it. DJ's like us are always skirting the line between copyright infringement and remix / alteration rights. I mean we get paid for playing other people's music right? Copyrights are there to protect artists against that scenario exactly. OK (stepping down from my soap box now)
Bitrate / Quality - of course through most systems 192 MP3 or 128 AAC will do just fine. But, just how large are these parties? If they truly are small house parties say one room up to 100 people, I'd say you're fine. But, when you play that same track on a full on sound system in, say a club or something (1000 people or so) with 2-5000 watts or more behind it, you will hear all the fuzz, noise, pops, etc. In the end it really is a personal decision, what's suitable quality to your ears? The vinyl sounds better doesn't it?
Just my opinion...Hope it helps.
Similar Messages
-
How to find out how many times an album has been burned to cd
how to find out how many times an album has been burned to cd
You can't.
and the restriction (lwhich limits burning a specific playlist to audio CD) applies only to a specific playlist with DRM songs. -
Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?
Welcome to the Apple Community.
I find it hard to believe that this information isn't clearly available somewhere, but it isn't and I don't think I've seen anyone here who is 100% sure. However, I believe you can have up to 10 associated devices, which include authorised computers (of which you can have up to 5), I suspect the Apple TV might become a temporary associated device while it's in use, but I'm not entirely sure myself. -
How many numbers of records can be uploaded using BDC at a time
dear friends,
i want to know that how many numbers of records can be uploaded using BDC at a time from legacy system(database).no resticsation.
large value of data upload. -
How many Multi-Touch points can an iPhone/iPod touch have at the same time?
How many Multi-Touch points can an iPhone/iPod touch/iPad have at the same time?
I am curious as IIRC (but forgot where the article is on the Internet),
if a touch surface is wanted to be able to detect more than 1 touch point at the same time,
then that touch surface needs adding 1 more conductive(?) layer.
(e.g. 2 points -> 2 layers, and so on)
So I wonder how many these layers are on the iPhone / iPod touch / iPad or even the trackpad on every MacBook (Pro).
(correct me if I'm wrong)
Just curious, thanks in advance!I believe it can only support 2. This article explains how the touch screen works but doesn't explicitly say how many points is supports.
http://electronics.howstuffworks.com/iphone1.htm -
Is there any limit on how many records a cursor can hold?
Hi Everyone,
This is Amit here. I want to know whether there is any limit on how many records a cursor can hold.
I have a program in which i am creating a cursor and passing it to another procedure as an input parameter. But the count of cursor query is more than 15 Lakhs. The program is running forever.
Just wanted to know whether the huge data is the problem.
Thanks ....
Regards,
Amituser13079404 wrote:
Just wanted to know whether the huge data is the problem.What do you think? How long does your code typically need to wait for the data to leave the magnetic platter of the harddisk, travel across wires and into the memory buffer of your application - for a single row?
Now multiply that waiting for I/O time with a million - for a million rows. Or by a billion, for a billion rows.
Is "+huge data+" a problem? Not really - it simple needs more work to get that amount of data from disk. More work means slower performance. It is that simple.
Which is why the row-by-row approach used by many developers is wrong. You do not pull a million rows from disk and process it in PL/SQL or Java or .Net. Heck, you do not even pull 10,000 rows like that.
The correct approach is to think data sets and use SQL to process that for you - and only return the bare minimum of data to the application layer. Maximize SQL. Minimize PL/SQL and Java and .Net. -
How many IDE drives & CDrom can be installed with SATA drives??
How many IDE drives & CDrom can be installed with SATA drives??
i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
& if it can be added, can i install 2 SATA drives???
THX in advanceThe 3 versions of this board that are available are:
875P Neo-FISR (PCB 2.0)
875P Neo-LSR (PCB 1.0)
875P Neo-FIS2R (PCB 1.0)
All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
2 x SATA (Supporting 2 SATA HDD drives)
2 x PATA (Supporting 4 IDE devices)
All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
->INTEGRATED PERIPHERALS
->ON-CHIP IDE CONFIG
ATA CONFIG: S-ATA ONLY or P-ATA ONLY
S-ATA/P-ATA KEEP ENABLED: YES
OPERATE MODE:
If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
2 x SATA (Supporting 2 SATA HDD drives)
1 x PATA (Supporting 1 Master IDE HDD drive)
The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
So the answer to your origional question is:
2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
or
4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0) -
How many attribute views you can be used in analytical view
how many attribute views you can be used in analytical view
Any attribute declared at component level in "Attributes" tab can be used in any methods of the view
WD_COMP_CONTROLLER->attribute
Thanks
Bhanu -
How many line item dimensions can a fact table have?
Hi,
How many line item dimensions can a fact table have? Is it tht Max of 16 dimensions(13+3) .Does the 16 dimensions include line items dimensions as well .
Pls reply.
Thanks
PraveenIt includes all dimensios, including line item dimensions.
If you have line item dimension, pl note you cant assign any other characteristic to that dimension.
Ravi Thothadri -
By default how many plan types one can create in Hyperion planning applicat
By default how many plan types one can create in Hyperion planning application?
Hi,
By Default,We can create 3 plan types in Hyperion planning application. -
Have purchased Adobe CC today. How many more apps I can use apart from photoshop, illustrator and indesign. Can I use all the listed apps within the membership fees charged per month? Or I will be charged extra?
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html -
How many partners or competitors can be associated with an account ?
Hi,
how many partners or competitors can be associated with an account ? Is there any limitations on this. As per the client requirement i need to add 1000 or more partners to one account.
Kindly help me on this.
@ Bob: Please help with any reference document if any?Hi Royston,
Thanks for the response. Could you please hep me on How to import partners or compettitors to parent account. By using Import wizard it is not possible, can i try with data loader or webservice.
Subbu -
How many days old we can see SQL Executions OEM 11g
one of my technical guy asked me 5 days back sql session information how many days old we can see SQL Executions OEM 11g ..?
Metric Historical Information will be saved for a year by default.
Check http://download.oracle.com/docs/cd/E11857_01/em.111/e16790/repository.htm#i1030660
SQL Statement execution might be analyzed from AWR snapshots using ADDM.
You can keep AWR Snapshots as long as you like.
Bare in mind that this will occupy database space.
From the Database Home page select the Server tab and select the Automatic Workload Repository link to set Snapshot Retention
Regards
Rob
http://oemgc.wordpress.com -
How many conditions and exceptions can be defined in a query?
hi,
Can any one tell
How many conditions and exceptions can be defined in a query?
i.e
How many condtion can be defineon an keyf igure with respective to charecteristics?
Because if we define more conditions on one keyfigure with respective to different chars,there might be some overlap among the conditons andconditions might not work.
Am i coorect?
Similary for the exceptions also.
Simply to be asked aswhat are the limitations of conditons and exceptions?
Regards
NareshHi Naresh,
In Query we can no limit for creating Condition & Exception
but Creating Condition : You can create two condition in a single condition it's work 'OR' Condition.
You can build different condition it will work "AND' Condition.
Thanks & Regards,
Venkat. -
Does Adobe Send allow you to select how many days your files can be downloaded - as with Adobe Send Now? Also, why don't I see the virus scanning message any longer with "Send" versus "Send Now"?
We relied upon the "days available for download" to get people to take
action more quickly. The "virus scanning" progress bar was simply another
way of knowing this activity was actually taking place - unless this is
written somewhere in the Adobe Send User Guide.....wherever that is.
On Tue, Dec 2, 2014 at 12:09 PM, bob.treitman <[email protected]>
Maybe you are looking for
-
I entered a new calender event using I cloud on my laptop. The enent transfered to my i Phone 5 S but, the start and finish times shown st i cloud on the laptop are different than the times shown on the i phone. How do I sync the times on the i Phon
-
Hi For sales, I have to pay the amount to Broker/ Agent some amonut based on gross price. How to do. Ex: Base price - 1000 commision - 20 Discount - 15 frieght------ 30 net value-- 1015 The commision s
-
WEBUTIL (attach and view files from database) --- Vista vs. XP differences
I have attached the following code. We are using Oracle Application Server 10.1.2.3 patch My questions are provided following the code. -- Open the local temporary file -- -- v_COMMAND := 'cmd /c start "" /WAIT "' || v_FULL_FILENAME || '" /w'; v_COMM
-
How do you save Markers in Audition 1.0?
Everytime I hit F8 to place a marker in the Edit View, then close out the file, my markers are missing upon re-opening the file. This has to be a simple fix, but I'm missing it.
-
any suggestions to get the phone up and running hard reset has not worked plugged to intunes and not even registering...and y way to get the phone back up to finsh the update..