How many Casio Commando owners have had freezing and rebooting issues?

I've had nothing but issues,including the above mentioned rebooting and freezing problems. If you have Please leave some kind of remark,I'm tired of paying for a phone that always has issues even after getting it replaced only to find the same issues and it seems to get worse with time. I'm going to take this to a Verizon store so I can look the person in the eye and show them all the threads(including this one) on here with the same issue and have them tell me no other customers are having these problems. I've read at least 10 threads with the same problem.

I've had the Casio G'Zone Commando for a few months - a constant battle. At first we thought there was an issue with the battery as it would keep discharging. Got a new battery. Then it started freezing. Sometimes off/on would re-start, other times had to pull the battery. Then the microphone went bad - VZW convinced it was me so sold me LG Bluetooth. Then speakers went out. Finally, issued replacement G'Zone about 12 days ago.
So we take all the time to re-install apps (mostly travel apps like airlines, etc - nothing strange). Freezing again, but restarts with off/on or battery pull. Yesterday in VZW store to get another smart phone (add'l) and transfer the Casio to husband. IT FROZE! And no one in store could get it re-started. So yet another new Casio coming.
We're pretty done with this phone - the Android version is old. It is kinda slow. I wanted it for the ruggedness, but not if it is unreliable (since I travel a lot). I don't know why a) VZW won't ship new phones more quickly (without US paying the cost) and b) won't let us get a different smart phone. VZW is really our only choice for carrier, and we've been with them since the cell phone era started. It seems like we just don't get near the service we used to.

Similar Messages

How many symbolic accounts, I have to create and then assign them to res...

Hi friends,
I am in the BBP creation phase, I have created the list of wage types for my client, there are 41 wage types, now as far as posting to accounts is concerned, how many symbolic accounts, I have to create and then assign them to respective G/L accounts ?
Please throw some practical light on this, I know all theory 
Thanks
Jay

Hi Jay
We wouldnt be able to tell you exactly how many symbolic accounts you may need to create for the 41 Wage Types as it is specific to your requirement.
Check these links out: Symbolic Accounts..
http://sappeers.wordpress.com/category/sap-fi-hr-integration/
It might help you with a fair understanding of what you need to do.
Example for linking wage types to symbolic accounts: basic pay wage type u20181000u2019 is linked to symbolic account u20188888u2019 (Salaries & wages)
Hope this helped!

Freezing and Rebooting issue - Hardware or Softwar...

Sorry if this has been asked before...but...
Is the freezing and rebooting issue caused by a fault in the Hardware or Software...?
Can someone from BT please explain just exactly what is going on.
Thank you,
wdp

sarahoxford wrote:
Just been on live chat as we are fed up of freezing up, random reboots and failed recordings. Usually happens on Gold, Sky Sports - the non freeview channels. Advice from Geetesh was factory reset thus losing existing recordings, stating rather optimistically that this 'will resolve the problem'. When pushed on freezing and failed recordings issue Geetesh said recording of 'internet channels is in a test phase so won't be able to record'?? But we have recorded on gold, fox for example - response is that it won't always work, only for some customers.
The advisor was getting confused. The bit about recording broadband channels still being in test phase only applies to BT Youview boxes. The recording functionality has been available for broadband channels on the BT Vision+ boxes since they launched last January.
To answer the original question. The occasional freezes and reboots are caused by the New Look software (possibly in conjunction with associated system changes on the BT servers). Many of us had years of trouble free viewing using the Classic software on the same black BT Vision+ boxes. It was only when we were upgraded to the New Look software that all the troubles began. If however, you are getting such problems many times per day, or even many times per hour that could indicate a hardware fault.

Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

Anyone able to help please?
Thanks.

How many times do I have to download and install Firefox 34.0 Beta 7? Software update asks me to do this (and I do) at least once a day. Yes, I have restarted.

Using MacBook Pro, 15", early 2008, 2.4G Intel core 2 duo, 4G ram. Software update asks to update Firefox 34.0 beta7 every day. If I update, it just asks me to do it again. It has done this through the last several Beta updates. It's a bit disconcerting, since the updates are supposedly for security and stability. Let me put the question in another way: how many times do I have to ignore the update request before it quits asking? This is all causing me to regret making Firefox my default browser, especially since Safari has been improved so much.

Even so there is only a average of nine Beta test builds for each version in six weeks, so not that often.
Sound like you the update is not installing perhaps due to read/write permission issues.
Try downloading the 34.0b7 dmg from https://www.mozilla.org/firefox/beta/all/

How many ipods do i have to go through with the red x?

i have had 3 ipods in the past 6 months the recent one ive had for 3 weeks after getting it back ive sent in 3 ipods so far and getting tired of putting music and videos on it and having it end up with the red X. how many ipods do i have to go through before it wont break?
Message was edited by: heytheredude878
Message was edited by: heytheredude878

You need to upgrade to Snow Leopard first. Contact Apple to buy a Snow Leopard installation DVD.
Make sure your system meets Snow Leopard's requirements:
Mac OS X v10.6 Snow Leopard system requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools
Once you have Snow Leopard, you can upgrade to whatever your MacBook will support.
There is no need for sequential upgrades. The reason Snow Leopard is a prerequisite for further upgrades is that it includes the App Store. All OS versions subsequent to Snow Leopard are distributed that way.

How many Apps can i have on my iPod Touch, is there a limit?

Is there a limit on how many Apps i can have on my iPod Touch?
Thanks in advance.

Thanks a lot, that was very helpful.
I am pretty sure that there's 16 Apps per page,
so...16 X 9 = 144 - 13 pre installed Apps.
131 total available (slots) for Apps.

In Safari why dont I have icon in toolbar that shows how many open pages I have?

Apparently when using Safari on the iPad there should be a little icon in the toolbar that looks like a rectangle and has various numbers in it. Apparently this shows how many open pages you have. When you tap on that icon, you are shown a page with thumbnails of the pages you have open. Unfortunately my husband's iPad does not have that tooblar icon. I cant seem to find any answers on the internet, from friends, from the IT people at work, the local people who sell iPads. Thanks to anyone who can help.

That was the case in iOS 4, but its not the same in iOS 5. Apple moved to a tab-based interface for the iPad in iOS 5. The old thumbnail view is no longer included.
Regards.

Does anyone know how many devices one can have on one apple ID?

Does anyone know how many devices one can have on one apple ID?

The names are for your benefit. The devices are identified by serial number in iTunes. iTunes knows which device is which no matter what you name the devices. It works the same way with iCloud. You can name all three devices Fred - and iTunes can tell them apart - but like I said, you want to give them different names for your benefit.

How many tasks can I have in NI-DAQmx system?

I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free). For hardware we'll use your PXI modules (because your hardware is ultra-reliable). I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand. I am doing the system software architecture now. I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels. Help hasn't helped much. Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way.
We want something much more akin to random access memory. We'll have UUTs of different kinds coming on and off at random times. Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s. It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) . It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq. Even with two devices, can I only have one analog input task running? Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
I'll also have Daq digital IO and two 6509 digital io modules. Do I have to cram all of that into some "task" concept too? The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output). How many tasks can I have for that stuff? On the DMM card I can measure capacitance amoung other things. Will I have a capacitance task? The idea of a "capacitance task" hurts my head.
Golly I hate tasks. Please help.
I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
Dave

Dave,
Thanks for posting to the NI Forums.
For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email. If you want to move to email support I recommend contacting NI through the email route.
I will answer your questions here. If you need more direct contact please feel free to contact us through [email protected].
For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple. A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.) and a single timing configuration (sampling rate, continuous vs. finite, etc.). It is a way to organize configuration data.
The concept of a task is an abstraction like OO programming. Like OO programming it may take some time to understand but can be a time saver in the end. Also like OO programming it does add some initial programming overhead. It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
With very simple applications OO programming sometimes does not make sense. But as a program gets more and more complex OO programming becomes more and more useful. It takes some learning but it is worth it.
I believe the concept of a task does the same thing. It does not change the actual functionality of the device or add excessive overhead. It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations. You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time. In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate). You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation. There is a single timing engine for AI, one for AO, and so forth. You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
However, tasks can exist even when they are not being actively run. You can create all the tasks you need at the beginning of your program and simply start and stop them as you need. After the task is stopped you do not need to clear the task until the end of your program. You can further increase performance by moving the Task into the latest state possible without actually starting the task. This can be done by calling myTask.Control(TaskAction.Action). The Task states are further explained in the NI-DAQmx Help Manual.
The concept of a task will need to be used with any device that is being programmed using NI-DAQmx. The 6259 and 6509 will need to be programmed using DAQmx. With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API. The SWITCH API does not use the concept of tasks. For the 4072 you will need to use the NI-DMM API. This API also does not use the concept of tasks.
Hopefully this information is helpful. Let me know if you have any additional questions or concerns.
Regards,
Neil S.
Applications Engineer
National Instruments

How many fonts can I have without issues on my Macbook Pro?

How many fonts can I have without issues on my old Macbook Pro? I am running 10.6.8.
Thanks,
dugmoore

dugmoore --
Are you having problems? If so, tell us what they are.
If you just want tons of fonts, you should have a good font manager, other than the Font Book that comes with your Mac. And you should avoid "free" fonts. They cause monumental problems.

How many buttons can you have in Encore?

I'm trying to make a disc containing about 33 separate clips, all listed in the Menu, and individualy selectable. But I find when I drag buttons to the menu,it will only accept 18, then no more buttons can be added. Is this normal for Encore? Is there an upper limit to how many buttons you can have?

Tim,
I like to keep my Scene Selection Menus rather clean, and lean, so normally limit the number of Buttons for a "cleaner" look, so with, say 16 Chapters/Scenes, I will likely do 4x Scene Selection Menus, with 4 Buttons each, or maybe 3 Menus with 6 Buttons in two, and 4 Buttons in the last one.
In the Project Panel, you can Duplicate your first Scene Selection Menu, to provide the number of Scene Selection Menus, that you need. I recommend that one Rename each duplicate Scene Selection Menu, so that it is easy to identify each one.
Then, from the Main Menu, add a Button that goes to the first Scene Selection Menu. Do all the linking, for say the 4 Scene Selection Buttons on that, and then add a "Next Menu" Button, that links to Scene Selection Menu # 2. That one will have the 4 Scene Selection Buttons, and the "Next Menu," going to Scene Selection Menu # 3, plus a "Previous Menu" Button, going back to Scene Selection Menu # 1. [Obviously, you can name those Buttons to suit, say "Next," and "Previous," or perhaps just "arrows" pointing to the right for "Next," and to the left for "Back."
If, for instance, one has an odd number of Scene Selection Buttons, on the last Scene Selection Menu, just "Edit in Photoshop," and Delete the "extra" Button Layer Sets.
I also like to add my own Button names in Photoshop, rather than let Encore automatically provide the names per the names of my Timelines. For instance, I name each Timeline in numerical order, so the names will read something like this: "01_Liz_Birthday," "02_Liz_Dance," etc.. On my Scene Selection Menu, I will nave the first Button "Liz's Birthday," the second Button "Liz Dance Recital," etc., without the numerals, that just help me know which Button I will be linking to, in numerical order. I also use Photoshop to edit the Button Layer Sets name, so that Button # 1 is named "01 Liz Birthday." That gives me the numerals in the Buttons' names in my Flowchart - with intricate navigation, that takes all of the guess work out of things - all names match up, and for the Timelines, I do not have any spaces, but do in the Text for each Button. A bit more work, but when it comes time to make my links, I can do it almost instantly, with no questions in my mind. I find that a little bit of preparation at the beginning, simplifies life down the line.
Good luck, and hope that helps.
Hunt

How many episodes can you have?

Is there a limit to how many episodes you can have in a single feed?
Suppose you podcast a weekly show, happily adding new items for each episode you create. Suppose, too, that you don't want to get rid of old episodes just in case you get a new subscriber who wants to go back through the old ones.
Are there good strategies already in place for this? Are there firm limits?
thanks,
Liz

Liz,
There is no firm limit on the number of items you can have in your feed. However there is a limit on the number that will show up in iTunes on your podcast page. That limit is 100.
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=75128758
Here is an example of someone that hit that limit.
That does not mean you are limited to 100 items in your feed - only that the first 100 items in your feed is all that will show up in iTunes on your podcast page.
However if you subscribe to the podcast above you will then see that all the items in the feed (>100) are made available for that podcast.
Early on most podcatchers just grabbed every item in your feed by default when you first subscribed to a feed. So it was considered good podetiqute to limit your items to 20 to 25 at the most.
However today since iTunes defaults to just the last item for automatic download, you can keep up all the items that are still releavent to your podcast.
So go ahead and add in all the items you want.
Rob @ podCast411

How many playlists can you have or create

how many playlists can you have or create

There is no documented limit.
Note that Smart Playlists with Live Updating use extra processing, so if you have more than a few dozen of them you may notice a slowdown.
Some people think they should create a playlist for each album. If by any chance that is the reason you are asking the question, you will find it is much easier to get to an album via the column browser.

How many libraries can you have in i photo?

How many libraries can you have in i photo?

gussie88 wrote:
Was she satisfied eventually!!! haha If you export and import photos to a new library, do faces -places etc transfer too? Thanks
Yes, I believe they do. The places data is associated with GPS coordinates tagged on each photo. I think the faces data works the same way -- it is associated with each photo regardless of what album it is in.

How many Casio Commando owners have had freezing and rebooting issues?

Similar Messages

Maybe you are looking for