How many clients are supported by AP 1532i

Hi Folks,
I am looking into the details of Cisco Aironet 1532i, but it does not really say anyting about the maximum number of clients the AP might support
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#~access
Does anyone as an idea?
Thanks
Karim

Hi
If you are looking for max number of clients these AP could support, for most of indoor AP model, general answer is 200 which is documented here. (some models max100 or 128)
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#~indoor
For the outdoor AP model it is not listed, but I would assume max value should be similar to indoor.
http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#~outdoor
As others pointed out when designing, you should keep it to low number (20-30) to give the required throughput/performance for each user.
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

How many users are supported on a Cisco Aironet 1141N? 30?

I have a client that wants to upgrade his Aironet 1131 APs with 1141N. How many users are supported on a Cisco Aironet 1141N?

Yes, you could have 30 clients on the AP.
Client density all depends on what the client is doing, really.
So if you have clients that are just web surfing and pulling email 30+ isn't a problem. If they are all streaming video, then you want to plan for less clients per AP, and more APs.
Steve

Can I find out how many clients are connected to a server process?

Hi, I am hoping I can find out how many clients are connected to a server process. This could be either a programmatic lookout number, a number in a log file etc.
By the way, does lookout have any application (not data) logs? I have noticed that occasionally lookout will crash and I cannot find any logs to determine why, what processes were running, who last accessed it etc.
Thanks

Hello,
There's currently no way to acquire this data. I think that'd be a great suggestion for the product. Please submit your feedback to our developers at the following link: http://digital.ni.com/applications/psc.nsf/default?OpenForm&temp1=&node=
Best regards,
Yusuf C
Application Engineer
National Instruments

How many CPUs are supported buying software via MacApp Store?

I am not sure how many CPUs are supported when I buy a software via MacApp Store. Who makes the rule?
The MacApp Store or the developer/software company?
i.e. when it comes out I like to buy Final Cut Pro X but I have no clue on how many computers I can use it.
Greetings from Germnay
mikefromberlin

A notable thing of the Mac App Store is that it is built on trust, there seems to be no check on how many machines you have installed an app, so they trust you to install it only on your computers.
True. And the license says computers that you own or control, so one can also use the apps on a Mac that was issued for use from an employer or educational institution, but that one may not actually own.
What is with the paraquas? It has not rained here in months!

Portege M300 - How many bit are supported by LBA

Hello,
Does someone know how many bit are supported by LBA? Has it 48 bit?
I need to know if I can mount a 120GB Hdd against a 160GB for an important upgrade.
I can't find this information on toshiba site: are there changelog BIOS somewhere?
Thank you

Did you mean the general LBA specification or the ATA interface equipped in M300?
There are two different spec; 28bit and 48bit.
I think your M300 supports the original design specifications and it provides only 28bit logical block addressing.
Therefore in my opinion you will be not able to use bigger then 137GB HDDs

881 Router - How many Vlans are supported (Dhcp scopes)

Dear All!
After calling Cisco three times without response, I need to ask this most likely simple question right here.
How many vlans does a 881 router support? Will this be the same number for dhcp scopes?
Thanks for your time...
..hopefully you guys can sort it for me ;)

Hi,
On every Cisco router platform each interface,sub interface & VLAN
uses a system reference point referred to as an Interface Desciptor Block.
IDB
Depending on processing power of each platform determines the number
of IDBs the router platform can support.
On all IOS version referred to in the documentation a Cisco 881
can support up to 300 IDBs
The router has physically 5 interfaces (4 x LAN + 1 x WAN)
300 - 5 = 295
So you shouldin theory be able to build
295/2 = 147 VLANs & 147 SVIs
Remember a VLAN uses 1 IDB & an SVI uses 1 IDB
See this link for more info.
http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-122-mainline/15096-idb-limit.html#max_no_interfaces
Hope this helps
Regards
Alex

How many layers are supported?

How many layers can I have in PS Touch?

A maximum of 16 layers is permitted in Photoshop Touch.

How many clients support access points 1602, 2602, 3602?

Hi! How many clients support access point 1602, 2602, 3602. I have found for example that the 1602 supports 32 ClientLink clients and max 128 clients, APs 2602, 3602 supports 128 ClientLink clients and max 200 clients. But is it really? And can we say for example that the AP 2602 will withstand max 200 clients?

The reason the answer varies so much, is because there are so many variables (this is also why the value ranges so much from one manufacture to the next). When determining the answer you are looking for you need to consider the following factors and likely more:
AP model and the features it supports
single, dual, or tri radio AP
20, 40, or 80Mhz wide channels
Device type (b/g, b/g/n, a/b/g/n, a/b/g/n/ac, spatial stream support, and channel width support)
Security/QOS method(s) employed
Average distance from the AP
Obstructions between devices and radios
Number of competing radios for the same channel
Data rates configuration
Rogue detection/mitigation configuration
Surrounding client density not just the area of concern client density
Noise floor levels
Application types/per user network load (is it heavy like YouTube traffic or a drone on the network like Pandora)
Network latency on the switching side - including the internet circuit
Application of per SSID, per user, and or per application rate limiting
The list continues, but I think you get the idea
I have personally seen 80 devices on a 5Ghz radio of a 3500 access point with several other access points and at least 200 other clients in the area and it was working well. That being said I would never design to expect that many on a single radio, but I think it is better said that you can safely design for 20-30 clients per 2.4Ghz radio and 25-40 clients per 5Ghz radio.
The default statement of 20-25 per AP and similar low expectation statements concerning Cisco wireless have been around for many years. It is now 2014. About 65% of clients support 5Ghz, ~9% support AC (already), ~90% support some form of N, and ~0.01% support B only. The landscape of wireless is changing fast making questions like this one have ever changing answers.
I hope this helps :).
John

How to see how many users are working on a Dynpro application?

Hello,
Is it possible to see somwhere at the portal or on the WAS how many users are currently working with my Web Dynpro application?

Hi Roy,
I know it isn' exactly what you want but if you got to:-
System Administration->Support->Web Dynpro Test Tools->User Management
you can at least see the users currently running Web Dynpro applications (I think!)
At least its a start!
Cheers,
Gareth.

Can I use my airport to see how many devices are on my network?

Can I use my airport to see how many devices are on my network?

No, that info was removed from the airport utility at v6 toyland edition.
The last real utility was 5.6.1 and although it is not actually supposed to work on AC model it does sometimes.
But you can generally see what is on your network using the netstat command in the computer..
Open the network utility and go to the netstat page and run scan.. this can take a few minutes.. and should show all the clients as well as the router/s. At least all the ones the computer can see.
The network utility is under utilized as people seem to not know of it.
There are iOS tools like this as well. Sorry but I don't remember the name/s.

How many client computers can you control with the $79.99 version on Mac App Store?

I mean client computers by the ones you control, not by the admin computers.

From: http://www.apple.com/remotedesktop/
No Per-Client Tax
Apple Remote Desktop 3 is incredibly affordable. With the Unlimited Managed Systems edition, you can manage any number of client computers — there is no per-client charge.
Apple's website says Unlimited Managed Systems, There are probable some technical limit, but i've never found it. How many client computers do you want to manage, are they all on the same lan? same subnet?

HT204074 I do not see a "Manage Devices" link when I access my account information through iTunes. I want to know how many devices are linked to my account. Can anyone help?

I have accessed the Apple Support site http://support.apple.com/kb/ht4627 but I could not find the "Manage Devices" link on iTunes. The advice they give is as follows:
You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Next to each device or computer name, you will be able to see when each was associated to your Apple ID. You will also be able to track how many days are remaining before your associated devices or computers can be associated to a different Apple ID.
Help would be greatly appreciated! Thank you!

Hello from Albania,
Please help me !! I'm desperate
I sold my iPhone 4s a few months ago.
Now i got my self a new iPad and created a new apple ID which i recently accociated with ITunes and ICloud.
However, i can't update anything on my Mac since it still requires the old apple id, even though i changed it anywhere i could.
I also don't get the manage devices when i tried to do this through the iTunes.
I have no idea what to do.
Waiting for your reply.
Regards

How do we know how many PDFs are generated?

Hello All-
We have created an Application ID with enough credentials on it to call the Adobe Services and our developers are using WebServices to call the Form Server in their code with that particular App Id and Generate the PDFs and what we really want to know is if there is any setting in the Adminui or in the code where we can set that and see how many PDFs are being generated for a period of time from that particular App Id? We are not using PDFGen component.
we are using Adobe LiveCycle 8.0.1 SP3, WebSphere 6.1 and DB2 8.2 database.
It will be great if someone can tell me if they did this before.
Thanks in Advance

On the old discussion software, they had distinctive avatars and identifiers under the avatars. They could have adopted distinctive avatars with the new forum software but they didn't. The reason that they didn't, I assume, is because the new software allows secondary icons to identify users. Every level had its own icon, the Hosts had their own icon, and Apple employees had theirs. This identification system was temporarily disabled along with the rest of the levels and reputations because of the performance hit that was being caused. It may come back if they can fix the performance problems.
Until then, Hosts and Apple employees have been using text signatures, such as "Apple Discussions Host" to identify themselves. There may be Apple employees who have not gotten the word about the text signatures.
BTW, to see what I mean by the identification icons, look at how Jive has implemented this feature on their own support forums. On this forum page, look to the right in the box labeled "Legend".

I cannot see how many messages are in or the size of the trash or sent folders after upgrading to 3.1.10

I recently upgraded my Thunderbird client to 3.1.10 from 2.2xx and I no longer can see the size of folders or how many messages are in certain folders. The folders do show how many are unread, but not the total messages or size of data in folder as I could with the previous version. If these options have been removed for some reason is there a problem with reverting to the previous version? Thanks, Dave English

That was exactly what I was looking for. Thanks

Having issues finding out how many bytes are sent/recieved from a socket.

Hello everyone.
I've searched the forums and also google and it seems I can't find a way to figure out how many bytes are sent from a socket and then how many bytes are read in from a socket.
My server program accepts a string (an event) and I parse that string up, gathering the relevant information and I need to send it to another server for more processing.
Inside my server program after receiving the data ( a string) I then open another port and send it off to the other server. But I would like to know how many bytes I send from my server to the other server via the client socket.
So at the end of the connection I can compare the lengths to make sure, I sent as many bytes as the server on the other end received.
Here's my run() function in my server program (my server is multi threaded, so on each new client connection it spawns a new thread and does the following):
NOTE: this line is where it sends the string to the other server:
//sending the string version of the message object to the
                    //output server
                    out.println(msg.toString());
//SERVER
public class MultiThreadServer implements Runnable {
     Socket csocket;
     MultiThreadServer(Socket csocket) {
          this.csocket = csocket;
     public void run() {
          //setting up sockets
          Socket outputServ = null;
          //create a message database to store events
          MessageDB testDB = new MessageDB();
          try {
               //setting up channel to recieve events from the omnibus server
               BufferedReader in = new BufferedReader(new InputStreamReader(
                         csocket.getInputStream()));
               //This socket will be used to send events to the z/OS reciever
               //we will need a new socket each time because this is a multi-threaded
               //server thus, the z/OS reciever (outputServ) will need to be
               //multi threaded to handle all the output.
               outputServ = new Socket("localhost", 1234);
               //Setting up channel to send data to outputserv
               PrintWriter out = new PrintWriter(new OutputStreamWriter(outputServ
                         .getOutputStream()));
               String input;
               //accepting events from omnibus server and storing them
               //in a string for later processing.
               while ((input = in.readLine()) != null) {
                    //accepting and printing out events from omnibus server
                    //also printing out connected client information
                    System.out.println("Event from: "
                              + csocket.getInetAddress().getHostName() + "-> "
                              + input + "\n");
                    System.out.println("Waiting for data...");
                    //---------putting string into a message object-------------///
                    // creating a scanner to parse
                    Scanner scanner = new Scanner(input);
                    Scanner scannerPop = new Scanner(input);
                    //Creating a new message to hold information
                    Message msg = new Message();
                    //place Scanner object here:
                    MessageParser.printTokens(scanner);
                    MessageParser.populateMessage(scannerPop, msg, input);
                    //calculating the length of the message once its populated with data
                    int length = msg.toString().length();
                    msg.SizeOfPacket = length;
                    //Printing test message
                    System.out.println("-------PRINTING MESSAGE BEFORE INSERT IN DB------\n");
                    System.out.println(msg.toString());
                    System.out.println("----------END PRINT----------\n");
                    //adding message to database
                    testDB.add(msg);
                    System.out.println("-------Accessing data from Map----\n");
                    testDB.print();
                    //---------------End of putting string into a message object----//
                    //sending the string version of the message object to the
                    //output server
                    out.println(msg.toString());
                    System.out.println("Waiting for data...");
                    out.flush();
               //cleaning up
               System.out.println("Connection closed by client.");
               in.close();
               out.close();
               outputServ.close();
               csocket.close();
          catch (SocketException e) {
               System.err.println("Socket error: " + e);
          catch (UnknownHostException e) {
               System.out.println("Unknown host: " + e);
          } catch (IOException e) {
               System.out.println("IOException: " + e);
}Heres the other server that is accepting the string:
public class MultiThreadServer implements Runnable {
     Socket csocket;
     MultiThreadServer(Socket csocket) {
          this.csocket = csocket;
     public void run() {
          try {
               //setting up channel to recieve events from the parser server
               BufferedReader in = new BufferedReader(new InputStreamReader(
                         csocket.getInputStream()));
               String input;
               while ((input = in.readLine()) != null) {
                    //accepting and printing out events from omnibus server
                    //also printing out connected client information
                    System.out.println("Event from: "
                              + csocket.getInetAddress().getHostName() + "-> "
                              + input + "\n");
System.out.println("Lenght of the string was: " + input.length());
                    System.out.println("Waiting for data...");
               //cleaning up
               System.out.println("Connection closed by client.");
               in.close();
               csocket.close();
          } catch (IOException e) {
               System.out.println(e);
               e.printStackTrace();
}Here's an example of the program works right now:
Someone sends me a string such as this:
Enter port to run server on:
5656
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=5656]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4919,localport=5656] connected.
hostname: localhost
Ip address: 127.0.0.1:5656
Waiting for data...
Event from: localhost-> UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1",424,"9.27.132.139","","Omnibus","Precision Monitor Probe","Precision Monitor","@busch2.raleigh.ibm.com->NmosPingFail",5,"Ping fail for 9.27.132.139: ICMP reply timed out",07/05/07 12:29:12,07/03/07 18:02:31,07/05/07 12:29:09,07/05/07 12:29:09,0,1,194,8000,0,"",65534,0,0,0,"NmosPingFail",0,0,0,"","",0,0,"",0,"0",120,1,"9.27.132.139","","","","dyn9027132107.raleigh.ibm.com","","","",0,0,"","","NCOMS",424,""
Now my program makes it all nice and filters out the junk and resends the new string to the other server running here:
Enter port to run server on:
1234
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=1234]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4920,localport=1234] connected.
Parser client connected.
hostname: localhost
Ip address: 127.0.0.1:1234
Event from: localhost-> PacketType: UPDATE , SizeOfPacket: 577 , PacketID: 1, Identifer: UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1" , Serial: 424 , Node: "9.27.132.139" , NodeAlias: "" , Manager: "Omnibus" , Agent: "Precision Monitor Probe" , AlertGroup: "Precision Monitor" , AlertKey: "@busch2.raleigh.ibm.com->NmosPingFail" , Severity: 5 , Summary: "Ping fail for 9.27.132.139: ICMP reply timed out",StateChange: 07/05/07 12:29:12 , FirstOccurance: 07/03/07 18:02:31 , LastOccurance: 07/05/07 12:29:09 , InternalLast: 07/05/07 12:29:09 , EventId: "NmosPingFail" , LocalNodeAlias: "9.27.132.139"
Lenght of the string was: 579
The length of the final string I sent is 577 by using the string.length() function, but when I re-read the length after the send 2 more bytes got added, and now the length is 579.
I tested it for several cases and in all cases its adding 2 extra bytes.
Anyways, I think this is a bad solution to my problem but is the only one I could think of.
Any help would be great!

(a) You are counting characters, not bytes, and you aren't counting the line terminators that are appended by println() and removed by readLine().
(b) You don't need to do any of this. TCP doesn't lose data. If the receiver manages get as far as reading the line terminator when reading a line, the line will be complete. Otherwise it will get an exception.
(c) You are assuming that the original input and the result of message.toString() after constructing a Message from 'input' are the same but there is no evidence to this effect in the code you've posted. Clearly this assumption is what is at fault.
(d) If you really want to count bytes, write yourself a FilterInputStream and a FilterOutputStream and wrap them around the socket streams before decorating them with the readers you are using. Have these classes count the bytes going past.
(e) Don't use PrintWriter or PrintStream on socket streams unless you like exceptions being ignored. Judging by your desire to count characters, you shouldn't like this at all. Use BufferedWriter's methods to write strings and line terminators.

How many clients are supported by AP 1532i

Similar Messages

Maybe you are looking for