How many clients can the time capsule handle?

I'm trying to research how many clients can be accomodated by the time capsule - anyone know?

Welcome to the Apple Support Communities
You can connect 50 devices and computer wirelessly to the Time Capsule, but you can connect more through Ethernet

Similar Messages

  • How many amps can the fan header handle?

    I'm installing a Xpower big bang motherboard in a Silverstone FT02 case.  The case uses 3 180mm fans rated at 12v .45 amps each.  Does anyone know what the fan headers are rated at? 

    1A maximum for the whole circuit, which means that this:
    Quote
    The case uses 3 180mm fans rated at 12v .45 amps each.
    ... may be too much current load (3 x .45A = 1.35A).

  • How many clients can associate to the AP?

    Hi
    I need know how many clients can associate for this AP model
    AIR-CAP3502I-A-K9
    AIR-LAP1131G-A-K9
    I have 45 clients currently associated with each AP.
    Thanks

    I need know how many clients can associate for this AP model
    Theoretically, you can have 1098 clients per WAP.  However, in practice, this will depend entirely on the type of Wi-Fi traffic being pushed around.
    Cisco recommends no more than 25 clients per WAP.  But if you are just pushing emails, HTML around then this number can go as high as 35 clients per WAP.  If you are pushing HD video, then the number goes down to around 8 clients per WAP.
    I have 45 clients currently associated with each AP.
    This is too much.  Even for a 1131.  Take note that, unlike the 3502, the 1131 only has FastEthernet data port.  So with 45 clients connected to the 1131, you may have some bottleneck.

  • Mac mini server how many clients serve same time

    mac mini server[lion server] how many clients serve same time, the web server, suppose only traffic the web server?
    macs/PCs with server OSs designed for work as normal, but more mainly for left on, connected and serve clients on the internet eg web server, mail server? T/F

    Thanks for your help. I actually forgot that I posted this and when I saw the email telling me you sent a repsonse I then did another search (using a different phrase) and I found this:
    https://discussions.apple.com/thread/4554036?start=0&tstart=0
    I think that is saying that I can do what I am asking.

  • How many clients can connect through cisco AP 1310 in wireless network ?

    I had setup wireless network with
    wlc4402,cisco AP 1310.1131 and 1242 and Cisco acs 4.1.My problem is only 30 clients connect through Cisco AP 1310 at a time.I can not connect more than 30 clients at a time.What is the issue in wireless network?please reply .
    Thanks and regards
    By
    D.Anbudurai

    WIRELESS > 802.11 > RRM
    How can do that setting ? Can you reply with
    some brief steps? And also I want to know how
    many clients can connect in wireless network at
    a time exactly through cisco aps?
    Thanks and regards
    d.anbudurai

  • How many clients can be connected to an Access Point

    Hi friend,
    I want to know how many clients can be connected in Cisco AP 1140.
    Best Regard,
    Marco.

    Hi,
    As Stephen mention the best answer is it depends.
    What you need to keep in mind is that wireless is halfduplex and a shared medium and due to this the bandwith will go down per client.
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml
    Q. How many clients can associate to the AP?
    A. The AP has the physical capacity to handle 2048 MAC  addresses, but, because the AP is a shared medium and acts as a wireless  hub, the performance of each user decreases as the number of users  increases on an individual AP. Ideally, not more than 24 clients can  associate with the AP because the throughput of the AP is reduced with  each client that associates to the AP.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How many clients can connect to Topic?

    I've just read through the jms tutorial and it seems to be ment to losely couple parts of a big systems. (delivery -> factory -> order)
    I'm in the process of beginning a application which has the following structure:
    One client sends a message to the server, the server sends this message to one or more clients. (in jms: sender sends message to topic, topic sends message to receiver).
    Now the client which receive the message from the server isn't part of a system, it's actual a person who sits behind his/her computer and finds the messages interesting.
    My question is about how many clients can "watch" the topic for messages? Are we talking about 50, 100, 500 or 1000 or maybe 10.000 ?

    Jan,
    I do not think that there is a forced limit for as long as your hardware can sustain.
    It also probably depends from MQ vendor to vendor, and their JMS implementations.
    In one of my apps 10,000 subscribers was the practical celing due to the memory limitations. (On Solaris 8, 2 GB shared memory)
    In another that used open source JMS celing was much lower. due to its underlying EJB implementation (Linux).
    I would suggest a clean box test. Benchmarking, stress and load testing you middleware is always a good idea. It will give you a good idea what your app can and can not do.

  • Can the time capsule be used as both a time machine backup and NAS storage

    Can the time capsule be used as both a time machine backup and NAS storage?   I want to use the drive as external, wireless storage for all of my files so all my PCs, MACs and iOS devices can access the files.  Plus, I want to use the drive for backing up my iMac via time machine.  Can the time capsule device be used for both these purposes simultaneously?  If not, are the other suggestions on how I can do this?

    Can the time capsule device be used for both these purposes simultaneously? 
    It can, but is really not recommended. Sooner or later there will be a fight for space on the drive between Time Machine and the other files.
    If you have plenty of free space on the drive, you can do this......but.....have you thought about how you will back up the "other" files that are stored on the Time Capsule?

  • How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    Thanks for digging out the facts.
    You have a 1st Generation Time Capsule.
    Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
    You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

  • How many contacts can the iPhone hold....now?

    This question was asked back in 2008 and has been archived, however I'd like to revisit this issue.
    What I'd like to know, is this:
    How many contacts can the iPhone hold before it effects performance?
    I have a iPhone user with an MS Exchange email account on the phone, Calendar and Contact sync is turned on. The problem is, the user has 10,000 contacts.
    The contacts synchronized to the iphone, however, when writing emails or doing any task that accesses the contacts database (i.e. auto-completion of names), There is a good 35 to 40 second lag before you can enter the second letter of a name on the keyboard. I can only assume that this is due to the pure insanity of having 10,000 contacts on a mobile device... The search takes too long. Although it did work just fine on the blackberry (a lessor device ).
    Can anyone tell me if there is a limit on how many contacts one can successfully store on an iPhone without running into the "lag" issue?
    Thanks in advance.
    Nigle

    What is the overall size of all these songs?
    This will determine how many songs the iPhone can hold.
    The actual capacity of an 8GB iPhone is around 7.3 GB - OS X alone takes up approximately 500MB.
    You should leave some free space available on the iPhone for general operating purposes and if you access any email accounts and for Safari cache purposes, etc.
    So you have around 7GB available - as long as the overall size of all 9400 songs isn't greater than 7GB or so, you are covered.

  • Can the Time Capsule hook up to a stereo like an Airport Express?

    Can the Time Capsule hook up to a stereo like an Airport Express?

    No, the Time Capsule has no audio ports or jacks on the device.

  • HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive

    Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?

    Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
    Yes, on XP, Vista and 7. Have not tried 8.
    If so what software do I need to buy?
    Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine.  It's not cheap though.  Check with the Genie folks for more info and compatibility with Windows 8.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...
    Other users may have some other suggestions.

  • How many clients can connect to AP54G?

    Pls let me know how many clients can connect to AP54G?
    I find in it's spec, but can't find.
    Thanks!!!

    no answer...
    any in my question wrong?
    Please..................

  • Can the Time Capsule be used just to back up on an existing wi-fi network?

    Can the Time Capsule be used just to back up on an existing wi-fi network?    We just set-up a new Xfinity wireless modem which is supposed to be very fast, but Time Capsule set-up instructions indicate we need to use the Time capsule as the primary internet connection.   True?

    My mistake. Meant to reply to snorris3. Text is repeated below:
    Can I still use it as a back up device?   My new modem is also the router.
    Yes you can.
    The best way (and really the only way) to set up the Time Capsule would be to connect an Ethernet cable from your modem/router to the Time Capsule.
    The Time Capsule will produce a wireless network by default, but if you don't want to use that network, it is a simple matter to turn off the wireless on the Time Capsule and use it only as a  hard drive for backups.
    I would be very surprised if the Xfinity modem/router would even come close to the wireless performance of the Time Capsule, but that may be another discussion.
    If you elect not to use the wireless on the Time Capsule, then you will be backing up over the existing wireless network that you already have.
    That would be a shame, since a third to half of the total cost of the Time Capsule is tied up in the wireless router portion of the Time Capsule. If you want to use the existing Xfinity wireless network, you could save yourself quite a bit of money by simply connecting a USB or Firewire hard drive to your Mac for backups. But, it's your call.

Maybe you are looking for

  • Songs not showing on 30gig iPod, but are showing on iTunes when attached

    Hello. My iPod has about 5.25 gig of music, video and podcasts loaded. It was working fine. I connected it to my computer to charge and the next time I tried to use it, nothing is showing up on the iPod itself. However, when I reconnect it to my comp

  • Function Module to Validate a Partner Assignement to a Customer(XD02)

    Hi, I need a function module to check the validation, while we assigning a partner to a customer in the customer master. I need to replicate the SAP functionality in this case. Thanks, Sekhar.J

  • Media Go failed to initialise??

    Just bought a sony xperia Z2 and have been trying to get the media go to install on my laptop (running windows 8) but it won't work. I keep getting the message 'Media Go startup failure. Media go failed to initialise. The application may not be insta

  • Help with loading infocube from flat file

    Hi: I am using SCM 5.1 and the BI 7.0 component that comes with it. I am trying to create an infocube and load it with flat file data but getting errors. 1. First I created the infoobjects and the infocube. 2.a I first tried to create only the data s

  • Why photos Not sync?

    Seine I have Downloads the latest iPad Software, the Sync Funktion haben in shamples. At least i can use my iPad Ägäis, but the following errrors are Irritationen me to the Bone - my 19800 Photos are listet by Albums, but Not a Single Photo inside. E