How many Communication Channels do we need?

Hi Friends,
I am doing a simple IDOC-XI scenario. I have created two software components for the sender and receiver systems. Do i have to create a single communication channel or two?. Coz the Idoc from the sender system comes as an inbound into the XI Server(Communication Channel 1) and from here the idoc goes to the receiver system (Communication Channel 2). Correct me if iam wrong. In case we need to create a single communication channel(Adapter type XI, Radio button Sender is not enabled here?? ) what should be the RFC Destination?. Is it the sender system or the XI Stystem or the receiver system??.
Prompt replies would be rewarded.
Thanks in advance.
Regards,
Tamilarasan.

Hi Tamilarasan,
- you can only create IDOC receiver channels
- if you have two R3 systems you have to create
two communication channels (one if the receiveer is the first R3 and the second one if the receiver will be the second R3)
so if you have:
a) firstR3 -> XI -> secondR3 scenario
you have to create only one communication channel for idocs
if you have:
firstR3 -> XI -> secondR3
firstR3 <- XI <- secondR3
then you'll need two channnels:)
IDOC configuration reference:
IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
IDoc Processing with the IDoc Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards,
Michal

Similar Messages

How many Communication Channels required for File--Bpm(SAP R/3)--File

Hi
 Pl..help me on this
 I am doing the following scenario File 2BPM 2 File
 i.e File -
BPM(ASync)
 BPM -
SAP R/3(Sync)
 SAP R/3 ---BPM (Sync)
 BPM ---File (Async)
 For me it looks three CC's but still i am not confident
 Can any one explain me on this
Adv thanx
Prasad K

File(CommChannel 1 -File Sender) -
> BPM(ASync)
BPM -
> SAP R/3(Sync) (CommChannel 2 - RFC Receiver)
SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
BPM ---> File (Async)(CommChannel 4 - File Receiver)
So a TOTAL of 4 Comm Channels.
Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
Cheers,
Himadri
null

How many DMA Channels does my device have?

I would like to know how I can find out (progammatically) how many DMA channels my device has. I am using the DAQmx driver. Other than with the traditional DAQ I can't find out anything about my device but the "type" and the "serial number". Where can I get some more details about the device (not in the MAX - I want to know it in my program) with DAQmx?
My intention is to find out how many DMA Channels the device has and depending on how many Channels I need - I am using "interrupts" instead of DMA.
Somewhere in the KB of Ni was written that the NI-DAQ 6.9.... realizes automatically how many DMA Channels are available and how many I would need - and so he takes "interrupts" for the rest.
It seems that they did a "step bac
kwards" because with the NI-DAQ 7.2 it doesn't work automatically if I need DAQmx VI's.
Does somebody know anything that would help me to solve this problem?
Thanks.

Sorry! I posted my first revision of the answer.
Here is what I meant to say:
Hello,
According to this KnowledgeBase, DAQmx and Traditional DAQ behave the same. Are you seeing something different?
As far as a workaround goes, all you have to do is trap the No DMA error. This error should be -200251. So in software, if you receive error -200251, then you need to configure the board to use interrupts, and then start the task again.
How to configure the board for interrupts differs from the four different DAQmx API�s (C, C++, DotNET, and LabVIEW). If you are unclear about how to do this in your environment, please let us know, and we can find
out.
Best regards,
Justin T.
National Instruments

HT1490 After how many charging cycles do I need to replace the baterie

After how many charging cycles do I need to replace the baterie

Please see below my system overview
MacBook Pro
13-inch, Mid 2010
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Serial Number 730504Z5ATM
Software Mac OS X Lion 10.7.3 (11D50b)

I'm going to buy a new iPhone, how many GB's do I need?

Rather than get a new iPod, I plan to use my new iPhone 4s for my music. I'll probably have about 800 songs, will use many apps, cruising the internet, watching video, and storing some pictures, bbut probably only around 100 or so. How many GB's will I need? 8? 16? 32?

What is the storage capacity of your iPod and what is installed on it besides music?
A movie purchased from the iTunes store will take up 1+ GB of storage - the longer the movie, more storage space required. The new 4S is available with 16, 32, and 64.
In regards to storage capacity, better to have it and not need it than to need it and not have it. Whatever storage capacity you choose, you won't be able to increase it. You probably won't go wrong with 32GB.

I have 7 tvs how many apple tvs do i need

i have 7 tvs how many apple tvs do i need

as many as you would want of your 7 tv's to display appletv content

How many Public Certificate do I need for Edge federation with Skype

Hi All,
I am trying to setup Lync 2013 with Edge to federate with Skype.
Now how many Public CA do i need to be able to setup Lync Edge to federate with Skype,.
Thank you,

Hi,
You need to have to add the CA where you're getting the public certificate from. By default, most common Trusted CA's are included in to the Windows OS it self and does not need to be added manually.
Z-Hire -- Automate Lync User Account creation process ( AD / Exchange / Lync )

How many server licenses do I need for SharePoint 2013?

I am new to the concept of CAL. I am reading about it. I found this linkhttp://sharepoint.stackexchange.com/questions/101914/how-many-server-licenses-do-i-need-for-sharepoint-2013
Suppose there are 2 users in the sharepoint farm. As per above link we requires 7/8 server license. So my question is do we requires 7/8 licences per user basis (2*7/8) or we requires 7/8 licences once only then we require 2 more licenses for 2 users (7/8 +2)?

The second option.
If you have 7 SharePoint servers then you need 7 SharePoint Server Licenses.
If you have two people in your company who can use SharePoint then you need two Client Access Licenses (7 server, 2 CAL).
If you had two hundred thousand users who could then you would need two hundred thousand CALs, but the number of server licenses would not change. (7 server, 200,000 CALs).

How many Sql licenses do i need

hi ,
With one sql license how many users can connect concorrently to SAP Business One.If there are more than 50 SBO users how many sql licenses do i need to take?
Thanks
OmPrakash.

Hi Om,
Generally if we install a SQL Server licensed version by default we get 5 user liceses, so i guess u need more no of CAL (Client Access Licenses) and generally 1 CAL would cost u around 3000-5000.
But when ur talking abt 50 users i suggest u go for the SQL Processor based license which will be cheaper.
For more information please check the following link
https://websmp203.sap-ag.de/%7Esapidb/011000358700000705282008E
Hope it helps,
Vasu Natari.
Edited by: vasu natari on Sep 16, 2008 7:49 AM

How many TREX systems do I need?

How many TREX systems do I need?
1 for non-production and 1 for production?
1 for all systems?
dev->tst->prd ?
any help would be appreciated

Depending on the size and the activity in DEV and QAS, generally one server would be sufficient, just be sure to put a decent amount of RAM into the server (by decent I mean around 16). You can have both sets of indexes on one TREX instance, and the majority of time, no one knows the difference.
Here's the caveat, though. If you're going to be testing with hundreds of users in QA, all performing searches at the same time, then you might want to split them up.
Also, depending on the number of documents and searches in production, you might consider a distributed approach there, as well.
Thank you.

How many attempts ( for passcode) is needed to disable iPad air, it is stolen and I have important information in it.

how many attempts ( for passcode) is needed to disable iPad air? it is stolen and I have important information in it.

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipadhttp://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.phphttp://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.htmlhttp://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-sthttp://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.htmlhttp://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-numberhttp://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061http://support.apple.com/kb/HT4061
 Cheers, Tom

Project Server 2010 how many CAL licenses do I need?

Hey Guys,
We have Project Server 2010 running for two years now.
We are preparing for the true-up yearly exercise with Microsoft to count the nbr of CAL licenses we need.
As Project Server admin I have been asked to provide an access log of the users accesing Project Server.
Is there a way to know how many users are accessing Project Server so we know how many CAL we need?
I alreayd read the project server 2010 licensing guide (http://download.microsoft.com/download/F/8/8/F88B3241-3E27-4BDD-8A01-ABF2422FB31C/Project%202010%20Licensing%20-%20Licensing%20Guide.pdf)
but it does not help me in this case.
Thanks in advance

I found my answer here :
http://social.technet.microsoft.com/Forums/en-US/0507ab7f-82d3-435d-8f90-74f2edfa3aa7/how-to-count-number-of-users-in-project-server-2010
"Well, you could just go to Server Settings >> Manage Users >> Actions and Export to Excel.
From there you can filter out the Active vs. Inactive Resources, and get your counts"

How many managed Servers do you need?

Hi,
One thing that has come up time and time again, is when trying to think about a new project and a new WL domain, is trying to know how many WL Managed Servers do you need?
Does BEA have some sort of metrics which says ok for this amount of input we recommend you having 4 managed servers on 4 single boxes?
And is there think on have 2 managed servers on 1 box or 2 managed servers on two boxes?
Any Help Appreciated.
Kind Regards,
Alistair.

Hi :-D
I don't believe BEA have guide lines on how many Managed servers are required based on Metrics. You could look at some performance evaluations but it's really only relevant if your application acts in the same way.
Cheers,
Doug.

Configuring data guard: how many standby redolog do I need?

Hi all, I want to add a standby databse to my RAC test environment but I don't understanad how many redolog I need.
The main db is a 2 node RAC (10.2.0.4.0); every node has 3 log groups; every log group has 2 logfile (every log group is multiplexed on DG_DATA1/ASR/ and FLASH_RECOVERY_AREA/ASR/ )
The standby db will have all its datafile on the same filesystem, so I already configured the trasnslations parameters:
DB_FILE_NAME_CONVERT='/opt/oracle/app/oracle/oradata1/ASRSB','+DG_DATA1/ASR','/opt/oracle/app/oracle/oradata2/ASRSB','+FLASH_RECOVERY_AREA/ASR'
LOG_FILE_NAME_CONVERT='/opt/oracle/app/oracle/oradata1/ASRSB','+DG_DATA1/ASR','/opt/oracle/app/oracle/oradata2/ASRSB','+FLASH_RECOVERY_AREA/ASR'
Replication via rman works well, but I have to manually add the standby redolog on the standby db and which formula to use to calculate the number of the standby redolog needed. Which is the correct formula between :
1)
# of standby log = ( # of redolog files + 1) * # of thread = (6 +1)*2 = 14 standby redolog files
2)
# of standby log = ( # of redolog groups + 1) * # of thread = (3 +1)*2 = 8 standby redolog files
thanks,
andrea

Andrea,
I think 8 should be the answer on your question. Because you have 3 log groups and 2 threads therefore (3+1)*2 = 8.
According to the documentation :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#SBYDB00426
Minimally, the configuration should have one more standby redo log file group than the number of online redo log file groups on the primary database. However, the recommended number of standby redo log file groups is dependent on the number of threads on the primary database. Use the following equation to determine an appropriate number of standby redo log file groups:
(maximum number of logfiles for each thread + 1) * maximum number of threads
I think you may get confused with maximum number of logfiles. But sometimes logfile is used as a synonym to log group. The actual log group files are usually called log members. (for instance MAXLOGFILES parameter specifies the maximum number of log groups and MAXLOGMEMBERS specifies the maximum number of members for each group).
Each additional member in a redo log group is just a multiplexed copy. You can also consider multiplexing the standby redo log files, the same why you do for redo log members.
In order to learn more about the usage, benefits and limitations of Standby Redo Logs (SRL) you can refer to Metalink Note 2193444.1.
I hope this helps.
--Mihajlo

How many gb's do i need for iPhone5

Getting ready to purchase a new iPhone. How do I determine how many gb's to buy? 16, 32, 64.

If your a casual user who only needs a few apps and games, and not 1000s of songs and pics, go for 16GB. IMO that is more than enough for most people.. I hav 1000 pics, 200 songs, 15 apps and still hav around 6GB left.. If you can afford 32GB though then why not

How many Communication Channels do we need?

Similar Messages

Maybe you are looking for