How many Communication Channels required for File--Bpm(SAP R/3)--File

Hi
    Pl..help me on this
    I am doing the following scenario File 2BPM 2 File
    i.e File -
BPM(ASync)
        BPM -
SAP R/3(Sync)
        SAP R/3 ---BPM (Sync)
        BPM ---File (Async)
    For me it looks three CC's but still i am not confident
    Can any one explain me on this
Adv thanx
Prasad K

File(CommChannel 1 -File Sender) -
> BPM(ASync)
BPM -
> SAP R/3(Sync) (CommChannel 2 - RFC Receiver)
SAP R/3(Comm Channel 3 -RFC Sender) --- > BPM (Sync)
BPM ---> File (Async)(CommChannel 4 - File Receiver)
So a TOTAL of 4 Comm Channels.
Since Sinchronous so 4 channels .. if you use idoc adapter instead of RFC 3 channels will do
Cheers,
Himadri
null

Similar Messages

HT201328 If IMEI No. is submitted for the unlocking process.. How many days is required for unlocking.?

Guys Can u plz.. Help me to knw about this..
If IMEI No. is submitted for the unlocking process.. How many days is required for unlocking.?

It varies from carrier to carrier.
The best person who would be able to answer this question is the customer services representative of your carrier.

How many SLD's require for 2 solman system requirements?

Scenario1:
One solman system for entire landscape->One SLD is required.
Is this SLD should be a seperate system or can be within solman?
Scenario2:
One solman system for DEV/QAS and other solman system for PRD.
How many SLDs are required? Can we manage with single SLD?
If two SLDs, Then both should be seperate systems. i.e, One SLD -> DEV/QAS Solman, Another SLD ->PRD Solman.
If only one SLD, Then it should be seperate system or can be within solman?
We do have EP in client enviroinment. Can we use SLD of EP?

Hi,
you can use one SLD for all your systems if you want. You can either use an existing one or the one which comes with Sol Man. That's up to you.
Any scenario is possible.
/cheers

How many Communication Channels do we need?

Hi Friends,
I am doing a simple IDOC-XI scenario. I have created two software components for the sender and receiver systems. Do i have to create a single communication channel or two?. Coz the Idoc from the sender system comes as an inbound into the XI Server(Communication Channel 1) and from here the idoc goes to the receiver system (Communication Channel 2). Correct me if iam wrong. In case we need to create a single communication channel(Adapter type XI, Radio button Sender is not enabled here?? ) what should be the RFC Destination?. Is it the sender system or the XI Stystem or the receiver system??.
Prompt replies would be rewarded.
Thanks in advance.
Regards,
Tamilarasan.

Hi Tamilarasan,
- you can only create IDOC receiver channels
- if you have two R3 systems you have to create
two communication channels (one if the receiveer is the first R3 and the second one if the receiver will be the second R3)
so if you have:
a) firstR3 -> XI -> secondR3 scenario
you have to create only one communication channel for idocs
if you have:
firstR3 -> XI -> secondR3
firstR3 <- XI <- secondR3
then you'll need two channnels:)
IDOC configuration reference:
IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
IDoc Processing with the IDoc Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards,
Michal

How many minimum VLANS required for wireless

Can management, ap-manager, dynamic interface(user defined) and LWAP are in the samesubnet.if not how many required.
Just correct me if am not wrong, 1.management, ap-manager and LWAP can be in a single subnet
user defined interfaces can be in a different subnet, so totally two subnets.
2.management, ap-manager can be in one subnet, LWAP in another subnet and dynamic interfaces in different subnet so tatally three subnets.

if you mean with lawpp the ap's then your statements are correct

How Many CD's required for backup?

How can I approximate the number of CD's I will need to backup my itunes library? My purchases account for about 1 Gig. Does the backup to disc feature do a "one to one" or is there a level of compression?

Thank you. The backup worked quite quickly and yes it needed only 2 CD's.

How many days it takes for epub file to be approved

Hi,
How many days it takes for the epub file to be approved and be live and available once its uploaded thru itunes bookstore?
Thanks
Rishi

Well that really helps me!
These are user-to user forums--Apple is not here other than Mods keeping the wheels from falling off. The only section where you might get help from people doing what you do are the Developers forums here:
Developer Forums

Custom Adapter - No content in Communication channel Monitoring for JCA

HI,
     We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
     Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
     We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
    Our client needs the entries in CC monitoring instead of Customised Audit Logs.
    Please help.
REgards,
Anurag Garg

HI Satish,
                 Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                 This log creates a trace File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
               Like- Message Successfully put into the queue.
                     - Successfully processed.
                 Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
               I think some extra code needs to be added to activate this in Monitoring.
               Please suggest.
REgards,
Anurag Garg

How many certificate in needed for push notification please tell me all steps ?

how many certificate in needed for push notification please tell me all steps ?

Your System Details shows;
Installed Plug-ins
Garmin Communicator Plug-In 4.0.4.0
Garmin Communicator Plug-In 4.0.3.0
Having more than one version of a program may cause issues.

How many Job_queue_processes are required?

Hi all,
I want to know how many Job_queue_processes are required to drive 50 schedulers.
According to AQ manual. it says "at least 2 for message propagation" and "set higher values if there are many queues", however, there is no sizing guidelines.
If you have an experience to create many schedulers which has multiple destination queue, please let me know what number you set to job_queue_parameters.
NOTE: In our environment, we have 50 schedulers, and each one of it has 3 destination queues.
Thanks in advance.

Hi ennisb,
Now we have 50 schedulers, and we need to propagate 100 messages per second in total. Required throughput is not so high, but we want to set latency=0.
I think it is better to set job_queue_processes at least 50. However, I wander whether I need extra jobs to realize better performance and/or stability...

How many DMA Channels does my device have?

I would like to know how I can find out (progammatically) how many DMA channels my device has. I am using the DAQmx driver. Other than with the traditional DAQ I can't find out anything about my device but the "type" and the "serial number". Where can I get some more details about the device (not in the MAX - I want to know it in my program) with DAQmx?
My intention is to find out how many DMA Channels the device has and depending on how many Channels I need - I am using "interrupts" instead of DMA.
Somewhere in the KB of Ni was written that the NI-DAQ 6.9.... realizes automatically how many DMA Channels are available and how many I would need - and so he takes "interrupts" for the rest.
It seems that they did a "step bac
kwards" because with the NI-DAQ 7.2 it doesn't work automatically if I need DAQmx VI's.
Does somebody know anything that would help me to solve this problem?
Thanks.

Sorry! I posted my first revision of the answer.
Here is what I meant to say:
Hello,
According to this KnowledgeBase, DAQmx and Traditional DAQ behave the same. Are you seeing something different?
As far as a workaround goes, all you have to do is trap the No DMA error. This error should be -200251. So in software, if you receive error -200251, then you need to configure the board to use interrupts, and then start the task again.
How to configure the board for interrupts differs from the four different DAQmx API�s (C, C++, DotNET, and LabVIEW). If you are unclear about how to do this in your environment, please let us know, and we can find
out.
Best regards,
Justin T.
National Instruments

How to find out how many memory is used for NIO

is there any way to find out how many memory is used for nio in a virtual machine. ?
I know that is possible to find out how many total, free and used memory the heap has by using java.lang.Runtime#totalMemory...
We sometimes expect errors that it is not possible to create any more connections because of the NIO memory size but the heap is still ok. Today we had an error where 170mbytes of heap where left but it was not possible to create new tcp connections because of an exception:
javax.naming.NamingException: java.net.SocketException: No buffer space available (maximum connections reached?): connect
The number of TCP-Connections was ok (<500).
It would be very nice if someone knows how to find out how the amount of memory that NIO buffers use can be determined within Java 1.4.
best regards
benjamin

We have to use 1.4.2_03. This is because of the special environment we are running on.
We did also figured out that there are some NIO Memory Bugs but we since we are not allowed to upgrade the used Virtual Machine we have to live with these errors.
The problem that we currently have is within a Server and because of this circumstance we are trying to find a workaround or way to find out how many memory is allocated. If we would know how to get this value we could restart the servers as a workaround after the value reaches a threshold.
We are also very sad that we can`t easily upgrade/update to the latest 1.4.2 Version or the newest 1.5 to get rid of these NIO Bugs!

How to find how many cursors are opend for application user

Hi all,
how to find out how many cursors are opend for application user and how many are opend for database user
Regards,
RM

Oracle does not know the difference between an "application user" and a "database user".
Oracle deals with a session. This session services a client. The client can be a J2EE application. It can be a Delphi client. It can be a SQL*Plus command line tool. It can be TOAD. Etc.
Oracle does not care who/what/where the client is when dealing with cursors and SQL. It deals with the session that services that client.
How many cursors does a session have opened?
Refer to V$OPEN_CUSOR in [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2008.htm#sthref3807]Oracle® Database Reference.
A select count on V$OPEN_CURSOR for a specific SID (Session ID) will return the number of open cursor handles in that session.

How many transaction key used for Service PO

Hi,
Please let me know, how many transaction key used for Service PO...
In OBYC, we have maintained GBB & WRX Transaction key's for Service PO, Is there any other Transaction key skip???
Please guide...

Hi,
GBB is used for Offsetting entry for inventory posting but for Service procurement WRX Transaction key is used for GR/IR clearing-service.
NOTE: You may use WRX with new account modifier ZZZ to triggers GR/IR clearing-service only for service procurement where you need to post all separate GR/IR clearing- material , GR/IR clearing-asset and GR/IR clearing-service and can done with user exit.
#But in special case GBB can be used with VBR key or copy of VBR as ZBR for default G/L account foe service PO.
For more check the link:
http://www.bluemarlinsys.com/ns/0603-03.asp
Regards,
Biju K

How many bytes are transferred for a SQL statement?

Hello!
I switched on a buffer trace.
Where can I see how many BYTES were transferred for an executed SQL stmt (if the bufferd table had to be accessed on the database in cause of an invalidation)?
What I can see is the duration...
Thanks very much,
Holger

Hello!
I switched on a buffer trace.
Where can I see how many BYTES were transferred for an executed SQL stmt (if the bufferd table had to be accessed on the database in cause of an invalidation)?
What I can see is the duration...
Thanks very much,
Holger

How many Communication Channels required for File--Bpm(SAP R/3)--File

Similar Messages

Maybe you are looking for