How many data in dynamic parametes are allowed in crystal R

I have a problem with a report of crystal report, I create a dynamic parameter for all business partners but it shows only 1,000 and in the database are about 2500, Does any body knows if crystal has a limit for the data in the parameters??
I hope some body can help me.

Please refer to Dynamic Parameters LOv limit

Similar Messages

How many break points and watchpoints are allowed in ECC 6.0

Hi,
Can any one say how many break points and watchpoints are allowed in ECC 6.0

Hi ,
A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.Max 30 breakpoints we can use.
There is a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change ie...Watchpoints allow you the option of monitoring the content of individual variables.The Debugger stops as soon as the value of the monitored variable changes.You can use max of 5 watchpoints.
Difference
1. Break Point.
At particular LINE of SOURCE CODE,
the system will STOP there.
2. Watch Point.
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
(For this, we have to give some
VARIABLE NAME & VARIABLE VALUE - with relational operator)
When this CONDITION gets satisfied,
(anywhere during the execution of the program),
the system will AUTOMATICALLY STOP THERE.
(EG when the value of matnr reaches the specified value)
That is the purpose of WATCHPOINT
(the system will WATCH it, like a dog)
Please go through this link:
Watchpoint Vs breakpoint
http://help.sap.com/saphelp_nw04/helpdata/en/c6/617cdce68c11d2b2ab080009b43351/content.htm
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger. Watchpoints allow you the option of monitoring the content of individual variables.
The Debugger stops as soon as the value of the monitored variable changes.
In addition, conditions can be specified. The Debugger also checks whether such a condition is fulfilled.
For more details...
http://help.sap.com/saphelp_nw04/helpdata/en/c6/617cd9e68c11d2b2ab080009b43351/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/792442db42e22ce10000000a1550b0/frameset.htm
If satisfied, rewards me..
Kind Regards
Yogesh

How many installations of Logic 9 are allowed?

How many installations of logic 9 are allowed? I have it running on two macs and am considering a third. Of course I only use one at a time. Do I need to uninstall one? I don't believe I ever registered the current installations with online registration.... How does all this work?

Yes.. the code was present in all versions of 8 and 9 up to 9.1.6 when it was removed/disabled...
Once you update LP9 to 9.1.6, 9.1.7 or 9.1.8 then that network check code is no longer functional.
LPX can be installed and run on as many Macs as you use/own.... using your Apple ID that you initally used to purchase it...without any limitations.
(Note: The App Store T&Cs determine this type of use is fine so long as you are using LPX for Private/personal use and not for example.. in a public studio... in which case you should purchase a multi user license...)
I often run LPX (and LP 9.1.8 for that matter) on several Macs here when testing stuff... at the same time without any problems...

How many dates are in each month?

Is there an easy way to determine how many dates are in each
month?
as of right now I am looping through creating a new Date()
and when the month changes I know the last date of the month.
This is kind of slow, and building a switch statement would
be kind of exhaustive.
Any ideas?

This method is created from the same named method in
mx.controls.CalendarLayout:
private function getNumberOfDaysInMonth(year:int,
month:int):int{
var n:int;
if (month == 1) {
if (((year % 4 == 0) && (year % 100 != 0)) || (year
% 400 == 0))
n = 29;
else
n = 28;
else if (month == 3 || month == 5 || month == 8 || month ==
10)
n = 30;
else
n = 31;
return n;

How many types of function modules are there

hi gurus,
how many types of function modules are there...
what type of function module bapi is....
i don't know much about that...
pls help me...
regards,
praveen

hi
hope it will help you.
<REMOVED BY MODERATOR>
Function Modules Used in Script:
In the Driver Program we must use all or some of the function modules that are listed below to transfer the data.
Open_Form
Close_Form
Start_Form
Write_Form
Write_Form_Lines
End_Form
Control_Form
Read_Form_elements
Read_Form_Lines
Any driver program must contain Open_Form, Close_Form and Write_Form. Other function modules are optional.
OPEN_FORM: This function module opens layout set printing. One must call this function module before he uses any of other layout set function modules like Write_Form, Start_Form, Control_Form etc., You need specify a layout set name in the export parameters of this function module. If nothing is passed to Open_Form then one should use Start_Form function module to open layout set before starting the output. The layout set opened by Open_Form should be closed by Close_Form function module, other wise output doesnt appear. We can use any number of Open_Form, Close_Form functions in one single program. But Close_Form must be there for every Open_Form in the program.
Some of the important export parameters we have to pass to Open_Form function module.
Form: Enter the Layout set name here, which then controls the output formatting. If nothing is specified then we must use Start_Form for opening layout set.
Language: Layout sets are Language dependent. Enter the desired language here. If the entered layout set is not in that language, then the function tries to open the Form entered in its original language. The default value is SY-LANGU.
Device: SAP Script can format a text on different device types. The device can be PRINTER or TELEX, TELEFAX, ABAP and SCREEN.
Dialog: Use parameter DIALOG to determine whether to display a dialog box before printing, in which the user can set several spool parameters for print formatting. Possible values: SPACE displays no print parameter screen. 'X' display print parameter screen. Default value: 'X'
Options: Use parameter OPTIONS to set several options for print formatting. The parameter has the structure ITCPO. The user can change some of the defined settings on the print control screen. The default value for Options is . We will discuss about ITCPO structure in detail later.
Other Export, Import and Exceptions are self-explanatory.
Close_Form: The function module closes the layout set opened using OPEN_FORM. The system executes any terminating processing steps for the last opened layout set. No Export parameters for this Function Module.
Start_Form: In-between the function modules OPEN_FORM and CLOSE_FORM, we can use different layout sets. This allows us to combine several different layout sets into one print output. However, we can combine only those layout sets that have the same page format. To switch layout sets, use the function module START_FORM. If another layout set is still open, we must close it first using END_FORM. If we specify no layout set name when calling START_FORM, the system restarts the last open layout set. If after OPEN_FORM no layout set was activated yet, the system leaves the function module with the exception UNUSED. Some of the important export parameters for this function module are
Form: The parameter contains the name of the layout set you want to use for printing. If you specify no layout set here, the system restarts the last active layout set.
Language: Layout sets are language-dependent. Enter the desired language here. If the layout set does not exist in this language, the system tries to call the layout set in its original language. If the parameter LANGUAGE is empty, the system uses the language of the last active layout set.
Startpage: Usually, SAP script starts with the page specified as start page in the layout set definition. If we want to start output with another layout set page, enter the name of the desired layout set page here. If the desired page is not defined, the system uses the start page defined in the layout set.
Program: To replace program symbols, SAP script must know which active program contains the work areas for the values to be passed. If we omit the parameter, the system searches for the field values in the program that was specified in the parameter OPTIONS (field TDPROGRAM) of OPEN_FORM. If we enter a program name, the system replaces the program symbols with the values from this program up to the next END_FORM.
Exceptions and other Export, Import parameters are self-explanatory.
Write_Form: The system outputs the layout set element specified in parameter ELEMENT into the currently opened layout set. In the parameter WINDOW we can specify the name of a window for the output. Remember that the layout set element must be defined in this window. The parameter FUNCTION specifies how to merge the text lines to be output with any existing contents in the window. In this case, there are differences between the different window types or areas. Some of the important export parameters used in Write_Form.
Element: Specify the name of the text element you want to output into the layout set window specified in the parameter WINDOW. The element must be defined in that layout set window. If you specify no element, the system uses the default element, if one is defined in the layout set.
Window: Specify the name of the window into which you want to output the layout set element specified in the parameter ELEMENT. Default value for Window is MAIN.
Function: The parameter determines how to output the text element into the respective window. The output type depends on the window type and area:
Window Type: MAIN Area: BODY
SET/APPEND: Appends to previous output.
Window Type: Main Area: Top/Bottom and
Window Type: Other than Main and all areas
SET : Delete the old element contents and prints the new elements
APPEND: Appends the new content to existing elements.
Type: The system interprets this parameter only for output to the main window. The parameter determines the area of the main window into which we want to output the element. Possible values: 'TOP' header area
'BODY' main area
'BOTTOM' footer area
Default value: 'BODY'
Write_Form_Lines: This function module outputs the text lines in table LINES into the specified layout set window. The text lines must have the SAP script ITF format. From the data in the text header, the system uses only the field TDSTYLE to apply the formatting attributes defined in the specified style for this text. If the field is empty, the system uses the identically named formatting attributes (character and paragraph formats) of the layout set.
Use parameter WINDOW to specify into which of the windows defined in the layout set we want to output the text. We can specify any window used in the layout set. The parameter FUNCTION determines how to merge the text lines to be output with any existing contents in the window. There are differences between the different window types or areas.
Header: This parameter contains the header of the text module we want to output in the current layout set. For the formatting process, the system uses only the entries in the header fields TDSTYLE and TDFORM. Structure: THEAD
WINDOW: Enter the name of the window into which we want to output the layout set element specified in parameter ELEMENT. Default value: 'MAIN'
FUNCTION: This parameter determines how to output the text element into the respective window. The output type depends on the window type and area: Window type MAIN, area BODY: 'SET' append to previous output 'APPEND' same as SET. DELETE' no effect. Window type MAIN, areas TOP and BOTTOM; all other windows: 'SET' delete old window or area contents and output the element 'APPEND' append the element to the existing elements 'DELETE' no effect Default value: 'SET'
TYPE: The system interprets this parameter only for output to the main window. The parameter determines the area of the main window into which you want to output the element. Possible values: 'TOP' header area 'BODY' main area 'BOTTOM' footer area Default value: 'BODY'
END_FORM: END_FORM ends the currently open layout set and executes the required termination processing. After calling this function module, no more layout set is active. For further output, we must start a new layout set using START_FORM. No Export parameters.
CONTROL_FORM: Use this function module to pass SAP Script Control Commands to the layout set. The Control command is passed through the export parameter COMMAND in quotes.
READ_FORM_ELEMENTS: This function module fills a table with all text elements that appear in one layout set. If we specify no layout set name, the system includes all elements of the currently open layout set. If we specify a layout set, the system uses the information about the active version of the layout set, retrieved from the database. Here we have two export parameters, Form and Language and a table parameter Elements.
READ_FORM_LINES: Use this function module to transfer the lines of a layout set element into an internal table. If we specify no layout set name, the system transfers the text lines of the currently open layout set. If we specify a layout set, the system uses the text lines of the active version of the layout set from the database. The Export parameters are Form, Language, Window and Element. If we pass these 4 parameters the function module returns a table with the lines from layout set.
Function modules are one element. There are no types. However sometimes an RFC enabled function module is referred to as RFC Function module, but really it is just a function module. Also BAPIs are function modules, but are usually referred to as just BAPI as opposed to BAPI Function module.
There is no different function module types , but calling the function module will be different.
check this function calls syntax
1. Calls a function module:
CALL FUNCTION func.
2. Call a function module in a different mode (asynchronous Remote Function Call):
CALL FUNCTION func STARTING NEW TASK taskname.
3. Call a function module in the update task:
CALL FUNCTION func IN UPDATE TASK.
4. Call a function module in a remote system (Remote Function Call, RFC ):
CALL FUNCTION func DESTINATION dest.
5. Asynchronous call to a function module with transactional processing (transactional Remote Function Call):
CALL FUNCTION func IN BACKGROUND TASK.
qRFC with output queue
6. Call a function module that can be activated in the context of enhancements:
CALL CUSTOMER-FUNCTION func.
Cheers,
Chandru
Edited by: Alvaro Tejada Galindo on Feb 27, 2008 11:53 AM

On how many of my computers am I allowed to install Premier elements if I purchase it ?

On how many of my computers am I allowed to install Premier elements if I purchase it ?
Is the software provided on a CD ?
thanks

temolo
If have Premiere Elements just on your old computer and you decide to buy a new computer and use the same purchased S/N Premiere Elements on the new, there are several options....keep in mind that your goal is NOT to have installed this purchased serial number on more than two of your computers.
a. If you want to sell the old computer and/or never want to use Premiere Elements version x on it, then Deactivate in the Help Menu/Deactivate of the program if that option is there. Then close the program and uninstall via the typical Control Panel route.
or
b. You could leave Premiere Elements on the old computer and just install the same purchased serial number Premiere Elements on the new. The matter of having to buy a new Premiere Elements may come up only if you then want to leave a Premiere Elements with the same serial number on the old and new computers and then buy a 3rd computer and want to put Premiere Elements with that purchased serial number on that as well - not removing the program from old and new.
Focus on....each purchased serial number represents a license and that license does not permit you to put that purchased serial number on any more than 2 computers.
Please review and see if the above helps. If you have one purchased copy of Premiere Elements along with a serial number unique to it and just two computers are involved (old and new), it is not clear to me when you talk about a 3rd license. If you do not see my point, please let me know and I will try to explain another way. No problem.
Thanks
ATR

How many number of input/output arguments allowed in Stored procedure

Please let me know how may input and output arguments are allowed in Oracle stored procedure.
I wan't to writer one generic SP and for that I need to know the limitation on the number of arguments. I am using Oracle 8.0.5.

The output from the BPEL process will be in XML format.
Your requirement is not clear, please state it properly what are you trying to do.
-Yatan

How to see all users who are allowed permissions for the specified entity ?

How to see all users who are allowed permissions for the specified entity ?
And change user permissions for the current entity
from Moscow with money

Vincent,
... and how to change entity permissions for some users?
from Moscow with money

How many PCs will Adobe Premiere 13 allow installation ?

How many PCs will Adobe Premiere 13 allow installation ?

You may install on as many computers as you want... you may activate and use on 2 computers

How many numbers of GRE Tunnels are supported on Cisco 3925 router?

Hi...
I would like to know that.......
How many numbers of GRE Tunnels are supported on Cisco 3925 router?
Thanks....

This is what I found in my search:
There may be factors such as memory constraints that will place practical limits on how many tunnels you can support. But there is also a hard limit on the number of tunnels that you can configure. That limit is based on the limitation of the number of IDBs supported by your router. The IDB is the Interface Descriptor Block and each interface (physical, or tunnel, or loopback, or whatever) requires an IDB. The number of IDBs will vary by platform and sometimes by release level of the code that you are running. You can use the privileged command show idb to see what the limitation is on your router. On the 1841 router that I just checked the limit on IDB is 1200 (which is a pretty large number - I believe that you would encounter other limits on performance or on size of configuration before you exhaust the IDB limit).
https://supportforums.cisco.com/thread/2007932
Hope it helps.
Jatin Katyal
- Do rate helpful posts -

How to read data from dynamic work area.

Hi guys,
            I have created dynamic table and work area for report.
i have populated few values in dynamic work area.
Now i want to read that data from work area again for calculation.
i can not use local varialbes to store those values as i dont know how many such variables i need to read.
that will be known only at run time.
So as per my knowledge i have only 1 option...to read those all values from work area.
Kindly help me .... how can i read data which is stored in dynamic work area.

Hi Kiran,
Following is not exact code, but exact solution to your problem:
LOOP AT <dyn_table> ASSIGNING <dyn_wa>.
      l_tabix = sy-tabix.
      ASSIGN COMPONENT 'KOTAB' OF STRUCTURE <dyn_wa> TO <l_kotab>.
      IF <l_kotab> IS ASSIGNED AND <l_kotab> IS INITIAL.
        <l_kotab> = gt_tabs-kotab.
        MODIFY <dyn_table> FROM <dyn_wa> INDEX l_tabix.
      ENDIF.
    ENDLOOP.
I am hardcoding KOTAB as I was sure about that being in the dynamic structure.
You can loop on the field catalogue, which you used to create dyamic table, to use the FIELDNAME to read all the fields of the work area (structure) of your dynamic table.
thanks,
Aabhas
Edited by: Aabhas K Vishnoi on Sep 24, 2009 8:12 PM

OIM Reporting: How to pass a dynamic parameter in the xml file

Hi,
I am generating a custom report in OIM. My stored procedure is ready and I am getting the required data when I query the database. However,while displaying it through the xml file, I need to filter the fetched data by group name. The glitch present here is that the group name is dependent on the resource selected and so the group parameter is dynamic. How can I pass this dynamic group parameter in the xml file to filter the data. Which attributes are to be used. Can anyone please help me out regarding this?
Thanks in Advance,
SK

The OOTB OIM reporting mechanism does not support dependant LOVs, which is
what you are asking for.

How to create a dynamic parameter off a universe field

Post Author: Summer Frend
CA Forum: General
Hello,
I am trying to create a dynamic parameter in Crystal Reports off my universe field. However the fields appear to all come in as STRING with length 65534 (memo field?). Therefore the fields are not available to choose in my parameter creation box. NOTE: In the universe designer, the field is set as CHARACTER type. I am just trying to make it work with the sample universes that are shipped with BobJ.
Is there a way in the Universe Designer to make the fields come into Crystal Reports as string fields so that I can choose them as the value for the dynamic parameter in Crystal Reports?
Thanks,
Summer Frend

I'll try again,
My problem is that I want a dynamic paramater for my Master flow (on START1 activity, so it is something like that : start1.param = select seq.nextval form dual; or from a function GET_PROCESS_ID) but it seems that I must give a permanent parameter it can not be set dynamicaly. I want my flow to be independant of any human intervention. So if it is the first load it does one thing if not the first load it does something else. I can not understand the point of having a parameter (in) that can not be set dynamicaly (looks more like a constant to me, or I'm missing something here). Hope your getting my point.
Thanks again
Jacques

How many downloads/buys of Photoshop are there?

I am doing my Senior Project on efects of Photoshop. I want to start my paper with how many downloads or buys of Photoshop there have been. I searched everywhere but couldn't find the info. If you dont know thats okay. Its just something that I'm hoping for.
Thanks in advance for any help!!

tiffani_buchanan wrote:
I am doing my Senior Project on efects of Photoshop. I want to start my paper with how many downloads or buys of Photoshop there have been. I searched everywhere but couldn't find the info. If you dont know thats okay. Its just something that I'm hoping for.
Thanks in advance for any help!!
There is this link to an Adobe Press Release in 2010 http://www.adobe.com/aboutadobe/pressroom/pressreleases/201002/021810PS20Anniversary.html and there are also 2 contacts listed there that you may be able to contact to get some information. Maybe even NAPP could help.
About the center of the press release is this quote:
"Over its 20-year history, Photoshop has evolved significantly from a simple original display program to a wildly popular application that has over 10 million users worldwide."

How many apps, folios and downloads are included with DPS Enterprise?

How many unique apps, folios (not fully sure I understand folios vs multifolios) and app downloads are included with DPS Enterprise annually?

Unlimited apps are included. The number of folios doesn't matter. The number of downloads included will vary based on your discussions the sales team.
Edit for future people reading this: This is no longer accurate, I messed up
Neil

How many data in dynamic parametes are allowed in crystal R

Similar Messages

Maybe you are looking for