How many DB space a load takes?

Hi, I would like to know how can I see in the system how many DB space a load takes. I have already monitored the requests and the statistics in the infocube. What I need to know is this for instance: a load of 1,234,567 record takes 3GB in the DB space.
Hope you can help me.
Regards.
Miguel Campos

Hi Miguel
Try to use tcode DB02 and press the button Detailed analysis. Here you can type a name of a table and get database info on that table, please notice that the correctness of the info depends on when the statistics on the table were updated. Talk to your basis guys about how to interpretate the DB02 figures. But remember that a load can be stored several places at the same time PSA, ODS, ODS change log and cube. So it's difficult to give an exact answer to your question.
Regards
Kristian

Similar Messages

  • HT4407 How many GB's Does BootCamp take?

    I Have got a MacBook Air from late 2011, and it's "only" got 128GB's discspace, then i wanted to hear about how many GB's does BootCamp Take?

    Windows 7 specs out at a *minimum* free drive space of 20GB for the 64 bit version and that would likely be very tight for a working Windows machine.  Given the limited drive space on an SSD (especially if you have the 128GB rather than 256GB drive) I opt for virtualization largely so I can retain one single drive partition rather than having to partition between Windows and OSX.  That is, you can have a small Windows virtual drive and then share folders from OSX that will allow using the space as needed by each operating system.
    Of course that requires buying Parallels or VMWare Fusion in addition to Windows, but I figure it's more than than worth it just for the flexibility it gives.
    That said, on this 13" Air with a 256GB drive I have an "inherited" 80GB Windows 7 virtual machine (came over from the old MacBook Pro).  On my 11" Air with a 128GB drive I opted to install a new virtual machine on an external SSD, but I don't often need Windows on that machine.
    The main downside to virtualization is a slight loss of speed, especially on high end video intensive applications (meaning things like gaming).  However the Intel video chipset in the Air is hardly optimal for that sort of thing to begin with, so I wouldn't have gone for an Air for a machine that was going to be dedicated to doing a lot of that sort of thing.

  • How many computers can i load my downloaded logic pro on? and can i sell my logic 8... or do i need it?

    how many computers can i load my downloaded logic pro on? and can i sell my logic 8... or do i need it?

    This is the mainadvantage of purchaseing apps from the app store:
    Go to the "App Store" app under the Apple menu.
    Login with your Apple ID account (the one you purchase Logic)
    Go to the Purchases tab where you find all the apps that you purchased with that Apple ID
    Any app that is not installed on the current computer is ready for download
    Download and install the app
    Done.
    Hoe that helps
    Edgar Rothermich

  • How many computers can I load Final Cut Pro on

    If I purchase Final Cut Pro x how many computers can I load it on? Can I put it on my desk top and lap top?

    In regards to FCP X on more than one computer --- currently with the older versions of FCP, if I try to launch FCP on a 2nd computer (that I own) it prompts me that I cannot launch the application on more than one computer at the same time.   Does this prompt appear in FCP X as well if two computers try to use FCP X at the same time?

  • How many photos can you load into Organizer and Editor

    How many photos can you load into Organizer and Editor at one time.  I receive the error message, "Unable to Import Files", which says "You exceeded number of files that can be selecteed and imported at once...."  What is the number?  Secondly is there a way around this for either the Organizer or Editor to work on thousands of photos at the same time?
    Thanks

    I have never heard of this particular limit before.
    Please understand, this appears to be the limit you can import into the Organizer at one time -- you can have as many photos as you want in the Organizer; but apparently you have to import in batches rather than all at once.
    I don't think it applies to the editor; and I can't imagine wanting to have more then a few files in the editor at any one time ... even if you could open 2000 photos in the editor at once, what sense would that make?

  • Script to know how many statements are not loaded in oracle CM

    Hi,
    Can some one would help me on how to prepare a script to know the bank statements are not loaded into oracle CM and how many checks under that particular statement are not loaded??
    I have the following info with me..
    1. The statements are loaded in a temporary table as soon as we run statement loader program.
    2. Then the records will get into ce_statement_headers_int_all and ce_statement_lines_interface.
    3. Then they will get loaded into ce_statement_headers_all and ce_statement_lines tables.
    Now, the only thing i am confused is how to get to know the statements list that are not loaded into oracle along with the error message. i am confused which tables will give the exact info ce_statement_headers_int_all and ce_statement_lines_interface or ce_headers_interface_errors and ce_lines_interface_errors??? immediate help would be highly appreciated and its very urgent...........
    Thanks.

    Hi Helios,
    I dint get you. This is not something which SR can be raised. I need to know how script can be written to know the statements that are not loaded in oracle cash management. I need to prepare a notification where in that should contain how many statements have been loaded successfully and how many are not on a daily basis...
    Thanks.

  • How many songs can you load to an iPod shuffle 2gb

    How many songs can you load to an iPod shuffle 2gb

    250 - 500. Depends on the size of your song file.

  • In how many ways we can load hierarchies to SAP BW and which transfer mthd

    Hi guru's,
    In how many ways we can load hierarchies to SAP BW and which transfer method is best.
    can anyone explain me with suitable example.
    Thanks,
    Madhu Raj.

    There are standard datasources available for hierarchies also. If the standard datasource does not satisfy your requirement you can always load a hierarchy using flat file. Refer to the below link for the same
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

  • How many CS Increments will it take to handle ProRes Correctly

    Two Simpleton-tests with AE 5.5 revealing that AE still hasn't learned a darn thing in regards to the ProRes Codec
    Test 1:
    1) Import ANY Canon 5DMKII into AE CS5.5
    2) Add it to a new Comp
    3) Add that comp to the render queue
    4) Select ProRes 4444 as output codec
    5) Render and compare with your original Canon Footage
    Expected Result in the Quicktime Player 7:
    The ProRes File Should look somewhat like the original.
    It does NOT.
    Actual Result
    Gamma is WRONG
    Color is slighty shifted
    And Noise/banding has been increased significantly.
    Test 2:
    1) Open Apple's Compressor
    2) Import the same Canon File
    3) Setup a 4444 Codec like in AE
    4) Render out
    Expected Result in the Quicktime Player 7:
    The ProRes File Should look somewhat like the original.
    It does.
    Actual Result
    ProRes transcode looks 100% identical to the source
    Test 2 Expanded
    Import the Compressor-created 4444 file into AE and repeat test 1
    Expected Result in the Quicktime Player 7:
    The ProRes File Should look somewhat like the Compressor-Created file.
    It does NOT.
    Actual Result
    Gamma is TOTALLY WRONG
    Color is LESS shifted than when exporting the Canon file directly
    Noise/banding is MORE than the compressor created file but LESS than when exporting the canon file directly...
    I am more or less speechless. I have been reading about this problem on a million blogs. Including adobe's own.
    Since at least since CS3. There have been several invain work-arounds. And now this. CS 5.5 - with the same problem.
    Adobe, how many versions do you need to get it right.
    Perhaps, you could look a little a Apple's technology, as it seems to be much more effective and advanced than yours.

    Hi Rick,
    first things FIRST ;-)
    Thank you very much for taking the time to make that post.
    My color settings in AE are correct. And I am using a color managed workflow -)
    It plays NO PART whether I enable the "Use Legacy Gamma"....
    Your example is correct in BUT it only applies to the realm in which you created it > RGB
    and it does not exhibit temporal H264 artifacts stemming from a YUV 4:2:0 (609 Color Space) Matrix
    You dont exaclty round-trip the way that I was describing a rountrip in my initial post.
    I know that a ramp can reveal certain things but it is a highly virtual comparison and does not really apply to live-worl  footage.
    At least in this case ;-)
    You take RGB-generated grays and then output to ProRes
    I took a YUV-color-realm movie entered into the realm of RGB (AE) and then exported to ProRes
    And THAT is where the problem lies.
    I am uploading the file in question. It is a movie from the 5DMKII.
    That is the source I have been testing with all along.
    It is great in that it has a dark area with quite a bit of noise. THAT noise after AE has encoded it to ProRes will look banded and become worse.
    Not so when encoding with Compressor.
    Besides, and this I cannot wrap my head around, when compressor is compressing the exact same file it is 295MB in size but when doing it with AE it is 413.
    Something wrong there ?
    Anyway, here is the link to the file if you wanna try with that.
    I am uploading a screen shot to show you which area you should look out for.
    And rememeber this is NOT visible when looking at it in AE. you HAVE to rountrip and open the source and the rountripped file in the Quicktime Player.
    Remember, most folks are WATCHING the movies in the quicktime player on OS X... So I would LIKE my files looking identical to the source when watched in the QT player. I dont believe that any consumer out there, just aiming to watch a movie has AE installed so that he can watch the movie in the way I (all AE users) intended it to look.
    Adobe we NEED this to work.
    When/if you do the test - make a real world comparison.
    Open the Original source in AE and out-encode it to PR4444.
    Then open the quicktime player and load up both (PR4444 and ORG source)
    Put them on top of each other and flip back n forth. Huge difference in the area that I have hi-lighted in SS below.
    The noise in the original is very present in the original file in that area...
    When looking at adobes encode the noise has become large square fields(almost) looks a little like banding.
    When using Apple's compressor to rountrip it looks exactly like original.
    Might I add, taking the original file and opening it directly in AME (bypassing AE altogether) will have the same impact on the file
    as when exported directly from AE. So it seems as if adobes Quicktime encoding framework has a bug altogether. I tried all of this with the
    cineform codec as well. When using adobe to encode to cineform it displayed the same artifacts.
    Original Source Footage Download
    Screenshot of area to look for

  • How many computers may I load logic pro x on?

    How many of my computers may I load Logic Pro X on after I purchase it ?

    All of those you own or control. Search this PDF for 'Mac App Store licence' without the quotes for more information.
    (90425)

  • How many apps can my iPad take?

    Hello guys please I need to know how many pages of apps I can download my iPad is 32GB + 3G I downloaded ten pages of apps and now it doesn't want to download more is that the maximum point? Please someone help!

    If you want to create folders - tap and hold down on an app icon until the icon begins to wiggle. Then drag that icon onto another app icon and it will create a folder. The iPad will suggest a name for the folder which you can keep or rename. A white horizontal bar will appear with the name of the folder. Just tap in the white bar to select the text, and delete and rename it. Tap any where on the screen outside of the folder and the folder will close. Tap the home button and the icons will stop wiggling and the screen is set.
    You can add 20 apps to each folder. You can have more apps than your iPad can hold by keeping them in your iTunes library and syncing the apps back to the iPad as needed. You can download apps on your computer in iTunes - you don't have to download them directly to the iPad.

  • HT4060 How many charges can my iPad take before it doesn't charge anymore?

    I am just curious how many charges I will get out of my iPad and if there is anything I can do to make it last longer.

    Hi Katithetoollady,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Apple - Batteries - iPad
    http://www.apple.com/batteries/ipad.html
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • How many BT cooks does it take to spoil a working ...

    First of all, this is not a rant but a chronicle of organisational chaos, misinformation and total incompetance!
    As of 30th October 2013 I contacted BT three weeks ago to request a working line transfer (BT's terminology). I asked if it was easy to do and BT said "yes, no problem, it's really straight forward".
    I was advised to get in touch with BT a minimum of 7 days before the transfer was required. I got in touch 8 days before we needed the transfer (18th October 2013). I had to request a "STOP" for the services on the line we want to take over. Fine.
    BT said they had to carry out an "offline transfer" because I had another line at my address and I said okay - would they get in touch to confirm this? Oh yes they said, you will get an email to confirm this but call us if you don't. I didn't get an email so I called. It's all fine and they said "why were you told to request a "STOP"?" I replied that's what I was told to do. They said, "no, you don't need a "STOP"". Okay I said, will it all be fine? "Oh yes, no problem, don't worry".
    On or around 21st October 2013, my father-in-law was contacted by BT (at the house we have moved to) and asked if it was okay for the account to be transferred to me. "Yes" he said and BT confirmed with me in another call that this had been done. I thought all was fine.
    The top and bottom is that the original advice to request the "STOP" was correct. The advice I was given NOT to ask for a "STOP" was incorrect and has subsequently caused havoc! "You don't need to aks for a "STOP" and I can't understand why you've been advised to do this" BT said.
    I was reassured that our working line transfer was on track for 29th October and would be completed by midnight at the latest - I was asked to phone and check if this was the case on our moving day. It wasn't done!
    I called on 30th October to report that it hadn't been done and was told not to worry, it would be done by 20:00 GMT. It wasn't done!
    I thought I would check on the progress once more and was told that it wouldn't be done after all. The order had not been processed and that my father-in-law had requested a transfer date of 1st November 2013. I checked with my father-in-law and he confirmed that he never gave BT this date. So where did BT get this date from? Did they just make it up to cover their tracks and incompetence? I suspect this was the case. My father-in-law even spoke to them whilst I was on a support call and confirmed this fact. The customer services representative was totally stumped on this information. Make waht you will of this.
    I then received a text message to say that the working line transfer could not be processed until 4th November 2013. What? Why? How?
    I was then told that it would be completed on 1st November for the telephone line and 6th November 2013 for broadband. What? Why? How?
    I phoned at 20:07 GMT this evening and received an automated message to say that our number would be "changed" on 1st November 2013 and the broadband would be reconnected on 6th November. What? Why? How? Are BT disconnecting our telephone line? Are they changing the number? Are they disconnecting the broadband?
    I then phoned BT at about 20:15 GMT and got through to the broadband team with difficulty after being cut off twice. I was reassured that it was being dealt with and that the line and broadband was not being disconnected. The supervisor said he would leave a note for another supervisor to follow it up "in the morning". What are the chances of that?
    I won't go into why this line "had" to be transfered by 29th October but let's just say that it was a no fail scenario.
    The top and bottom of this is that I will be seeking major compensation from BT and looking for an explanation from a senior member of their team. Of course I expect our telephone line and broadband to be disconnected before I can make this call or send an email. We will be moving to a different supplier after being loyal customers for nearly 30 years. 
    Come on BT, serve your customers and remove the incompetence. After speaking to many different people about this they confirmed that BT would get it all wrong - they have been proven correct.

    Hi Stuart,
    Many thanks for responding to my post.
    It turns out that BT have made such a major error that we may now have no broadband for 6 days! The issue has been expedited to try and get it sorted.
    They have admitted that it is their error and that it is a grave on at that.
    I will of course send them an invoice for every day I cannot use broadband for my temporary business set up at the new address. This will be accompanied with a small claims court action. BT cannot be allowed to do this to their customers.
    Suffice to say that we will be moving away from BT in the near future to a provider that can get a job done properly.
    When I get a moment I'll PM you with the VOL number - I eventually received this yesterday, 30th October 2013.
    All the best,
    Rees.

  • HT204350 How many hours (maximum) does it take to migrate 400  GB from one MacBook Pro to another MBP using Ethernet connection?

    How long do I need for migrating data from old MBP to a new MBP?

    The fastest way would be to connect the two computers over Firewire, start the new MBP in Target Mode, and either clone the whole hard drive from the old MBP or only copy across the things you need. Doing it that way would take about 1-2 hours depending on how much stuff you're copying.
    Ethernet would be a lot slower.

  • How many computers can you load Adobe software

    We have four computers in our house (2 Laptops, 2 Desktops).
    Can you load PS Elements on three computers?
    I am thinking of upgrading to PSE10
    Thank you
    Bob

    Your license will let you activate PSE on two computers.

Maybe you are looking for