How many delivery note defined in standard R3 system ?

Dear Guru,
I am checking the delivery note in one R3 system....
Scene :
i found the delivery note number filled in the "MB03" screen which is "17515882", but i can not find it via Tcode 'VL03N' & 'VL33N' ....
Is it has another delivery note defined in R3 system except for the inbound delivery and outbound delivery ?
If yes how to check it ?
Many thanks
Best Regards
Carlos

The delivery not number is in general a field to capture an external number, the number from the vendors delivery note.
In STO process you can use the outbound delivery note number as reference to post your GR.
In both cases the number is stored in the same field.

Similar Messages

How many versions of MySQL Server Standard edition have there been?

I need to know how many versions of MySQL Server Standard edition there has been?

I need to know how many versions of MySQL Server Standard edition there has been?
Do you really mean MySQL? Or maybe MS SQL Server? If it's the last, then have a look at:
http://sqlserverbuilds.blogspot.de/
Olaf Helper
[ Blog] [ Xing] [ MVP]

Data Source Z*** is not defined in the source system

Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?

Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny

Error: Infoobject is not defined in the source system

hi
(I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
this is my issue:
I am trying to load master data (attr) for an infoobject.
But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
"Infoobject is not defined in the source system"
"Erros in source system".
(I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
any help on what could be wrong here? Pl let me know,
thanks

Thanks Ricardo,
I have tried that b4. and it says the "source system connection is OK".
any other idea?
Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
thanks
Message was edited by: Esan

Extraction Problem - DataSource is not defined in the source system

Hi,
I am loading transaction data into sales cubes, while loading in process chain it shows "No Data"
so when i go in rsa3 extration for checking availibilty of data.
The following message shows,
DataSource 2LIS_12_VCHDR is not defined in the source system.
In LBWE first it was shown Inactive then i make it active.
So, what is the procedure to defined this data source to the source system.
Thanks & Reagards,
SD.

Hi All,
Thanks for ur reply.
But i can not found the datasource in RSA5, can anyone explain how to find the datasource in RSA5?
Datasource name : 2LIS_12_VCHDR , Cube Name : 0SD_C03
and how to activate in RSA5 ? & after activation how can migrate the same datasource in r3 side by replication?
Also the procedure to fill up the setup tables and then do the loading from r3side by thorugh infopackage...
Thanks & Regards,
SD

InfoSource 8ODS_SLS is not defined in the source system

Hi Guys,
    When I tried to load data from ODS to Infocube, I am getting the following error.
InfoSource 8ODS_SLS is not defined in the source system
      Source System is not R/3. It is just a flat file and data was uploaded into ODS. When transferring the data from ODS to Infocube, I get this problem. And I have defined the update rules for infocube and also given the infosource name as ODS.
      But the data is not getting uploaded in the Infocube.

First replicate your BWSELF system.
Then, Run this program in SE38:
rs_transtru_activate_all
Enter the source system (your BW system)
Enter the datasource (8ODS_SLS).
If you get an error message immediately, the datasource doesn't exist. If it runs, check and make sure you get no error messages.
/smw

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

Infosource 8ZISCMS10 is not defined in the source system

Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...

When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

InfoSource is not defined in the source system

Hi,
We are getting error 'InfoSource is not defined in the source system' while extracting data from Planning book to Cube in APO.
Data is coming up to Extrack checker ( RSA3 ) but not comming to PSA.
Please help me.
Thanks
Subba Rao

Hello Subba,
Have you replicated the datasource on the BW side? If you use the 3.x data flow then you also need to assign the datasource to and infosource.
Best Regards,
Des

DataSource 0HR_ATT is not defined in the source system

Hi Gurus,
When I am trying load data for HR Master data Attribute it is not loading any anything. I checked that datasource in Rsa3 at R/3 side there it is showing
"DataSource 0HR_xx_attr is not defined in the source system", can anybody give me the solution.
I will assign full points.
Thanks in advance.

Hi Sergio,
I have replicated the datasource in BW. Still It is showing the same.
Kindly advice.
Maruthi

DataSource 2LIS_11_VAHDR is not defined in the source system

I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
Then I am using RSA3 I receive the following error
DataSource 2LIS_11_VAHDR is not defined in the source system
I tried to activate this data source several times in ERP Dev and send it to production without any success

I am sure you would have done these steps, but just a double-check.
1. RSA5 - Install the data source
2. RSA6 - Activate the data source
Check in LBWE if the data source is available.
All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
Further to the above, do a check in Dev for the following.
After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
And check the data in RSA3.

InfoSource 80FIAR_O03 is not defined in the source system

Hello,
I am facing one issue while running process chain in Test client.
Isssue: 0FI_AR_4 process chain loading to ODS successfull. the next step in process chain is further update. data is goint to cube. error getting u201CInfoSource 80FIAR_O03 is not defined in the source system.u201D i have replicated the DS and activated 3-4 times also ran progam also. but still getting same error message. i deleted data from cube. In productio its running fine.
currently client is updating ECC 6.0 system
what could be root cause?
Thanks in advance
CPY

Hi,
Can you please check this thread :
Re: InfoSource 80FIAR_O03 is not defined in the source system
Cheers,
Tanish.

DataSource 0HR_PA_PA_1 is not defined in the source system

Hi All,
DataSource 0HR_PA_PA_1 is not defined in the source system Error is coming when I am trying to activate the datasource in source system (In RSA5-Data source is not available in source system)in order to pull data to HeadCount InfoCube in SAP Hr module.
Can anybody please help me in this regards.
I searched in sdn but no luck.
Thanks
Mohan

HI Mohan,
0HR_PA_PA_1 is a datamart datasource , It will be available in the BI system and not in the HR system
The extractor takes the data from the master data tables in the BW system. (check SAP note 336229 )
Check the SAP help
http://help.sap.com/saphelp_nw70/helpdata/en/29/02b43947f80c74e10000000a114084/frameset.htm
Regards,
Sathya

Many Delivery Notes / One Invoice

Hi all,
We are a business that sends out many truckloads of product, and need to send a separate delivery note with each truck, but we want to send the client only one invoice for this. At the moment the system produces multiple invoices. What is the easiest way to consolidate those invoices into a single invoice?
Cheers,
Nick
B1 8.8 on MS SQL 2008

Hi Nick.......
You might be doing Copy To option from Delivery to Invoice. In such case for one delivery only one invoice will will be created. So for multiple deliveries multiple invoices will be created.
But If you use Copy From Option then you can create One Invoice against multiple Deliveries.
Juts Open AR Invoice Directly select Customer and then press the Copy From Button and then it will give the list of delivery doc and just press Ctrl and select the deliveries one by one against which you want only one invoice......
This will solve your problem.......
Regards,
Rahul

How do i see how many points i have in this forum system?

How do i see how many points i have in this forum?
I will give points to best answer

hi Debbie!
Go to your public profile link, next to your status level you will see your total points.
hmmmm. one quirk. if people don't actually have a status level yet, i don't see a points tally if i look at their public profiles. (not sure how it looks to a poster without a status level if they look at their own public profile.)
if you've got a relatively small number of posts (and don't have a status level yet), it's possibly to do a manual count by checking through your My Posts (by opening each post in there and checking for any yellows or greenies.)
love, b

How many delivery note defined in standard R3 system ?

Similar Messages

Maybe you are looking for