How many digital voice ports can Cisco 3663 support ?

How many digital voice ports can Cisco 3662 support ?
They said "Medium complexity Codecs: 360 (E1)/288 (T1) and High-complexity Codecs: 180 (E1)/144 (T1) "in Cisco 3660 voice gateway data sheet .
But another document said you just configured 4E1 on a Cisco 3660 router .
Which one is true ?

Hi,
There are some other issue except physically accepted number of voice port.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00800921ed.html
page will give you better idea. Even though you can install many voice ports into a router , there is other limits you encounter.
Bets Regards

Similar Messages

How many Voice connections can cisco 2821 support?

Good day.
I have a cisco 2821 with EVM slot, NME-X slot and two HWIC slots. I have 4 port FXOs on the two HWIC slots. The EM-HDA-8FXS module on the EVM slot can handle 8 FXS connections. Please i would like to know if there is an EVM module that can do FXO connections and also how many voice connections can this router handle in total. Can the EM-HDA-8FXS module handle both FXS and FXO connections?
Hope someone can help me out. My deadline has already passed.
Regards,
Obinna.

Hi, already replied to this in the appropriate forum.
Please do not open duplicate threads.

How many deleted voice messages can be stored in deleted messages

There are 256 messages stored in my "deleted Messages" on my phone... How many will it hold?

It will hold as many as you have memory for. It's a good idea to clear them occasionally. They can eat up quite a bit of storage space over time.

How many concurrent wireless users can the WRT54GR support

recently I started getting problems with my WRT54GR. my sons phone keeps disconneting and going it own phone service to get internet data. I wondered if the was a limit to the number of concurrent wifi users ?
Solved!
Go to Solution.

newbee99 wrote:
recently I started getting problems with my WRT54GR. my sons phone keeps disconneting and going it own phone service to get internet data. I wondered if the was a limit to the number of concurrent wifi users ?
Yes. sabretooth is right. It's around 32 connections. You might need to perform a hard reset on your router then reconfigure it back manually.
If everyone needs to believe in something, I believe I'll have another beer..

How many event actions filters a cisco ips can support

we are running cisco ips 7.0(2) E4, and we are planning to tune some of the traffic everyday.......any idea how many event action filters can be applied to a sensor or is there is any maximum limit on the number of filters?

There is no limit to how many event action filters you can configure. I assume that you also know that event action filters is ordered list:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_event_action_rules.html#wp2033432
Also, found this bug FYI: bugID: CSCtf78755:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtf78755
(When over 495 event action filters are configured via CLI, it's corrupting "rules0.xml" file)
Hope that answers your question.

ASA 5510 - how many concurrent VOIP calls can pass through?

Hi all,
I wonder how many concurrent VOIP calls can handle Cisco ASA 5510, any idea?
Gegham

hi Gegham,
Basically what the values of 50,000 and 130000 connections indicate are lab values tested with 80% TCP and 20% udp traffic. (according to table a-2 in the doc below)
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/specs.html#wp1170941
RTP is udp traffic but in case of an asa and considering a customer scenario what happens is...
1 voip call = 1 control connection (h323,sip,sccp) + 2 or 4 rtp connections
-so a call will in total easily consume 5 or more connections depending on control connections you have set up .
-also this number differs depending on if the call is voice only or video.
So to simply answer your questions...
1>the number of connections that a call consumes depends on the above factors.
2>Also there is no hard number on the number of calls an asa can handle because this depends on the controls you use ...including nat and inspections.
Thanks,
Karthik

How many types of ports are there which we use for data transfe in ale/idoc

friends let me know how many types of ports are there which we use for transfering
data in ale/idocs?

Hello,
you can use file port,trnasactional RFC port.FI you are using IDOC-XML conversion combination,then you can XML port also.
Thanks

How many IDE drives & CDrom can be installed with SATA drives??

How many IDE drives & CDrom can be installed with SATA drives??
i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
& if it can be added, can i install 2 SATA drives???
THX in advance

The 3 versions of this board that are available are:
875P Neo-FISR (PCB 2.0)
875P Neo-LSR (PCB 1.0)
875P Neo-FIS2R (PCB 1.0)
All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
2 x SATA (Supporting 2 SATA HDD drives)
2 x PATA (Supporting 4 IDE devices)
All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
->INTEGRATED PERIPHERALS
->ON-CHIP IDE CONFIG
ATA CONFIG: S-ATA ONLY or P-ATA ONLY
S-ATA/P-ATA KEEP ENABLED: YES
OPERATE MODE:
If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
2 x SATA (Supporting 2 SATA HDD drives)
1 x PATA (Supporting 1 Master IDE HDD drive)
The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
So the answer to your origional question is:
2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
or
4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

How many 3rd party displays can be connected to MBP retina 15"

I was just wondering how many 3rd party displays can be connected to the MacBook Pro with Retina Display 15" and 16GBs of ram. I have contacted the Apple Online Chat and every time I get a different awnser. I know that there are 2 Thunderbolt ports and a HDMI port on the machine. Can someone help me please?
Thanks,
Jayden

Near all screens. You can use the HDMI port to connect the MacBook Pro with Retina display to a HDMI screen, but you have got Thunderbolt.
Thunderbolt is compatible with Mini DisplayPort, so you can use Mini DisplayPort adapters to connect your MacBook to a DVI or VGA screen too

Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?

Is there a restriction on how many simultaneous wireless iPads can watch movies from one iTunes account or AppleTV generation 2 or later?

Welcome to the Apple Community.
I find it hard to believe that this information isn't clearly available somewhere, but it isn't and I don't think I've seen anyone here who is 100% sure. However, I believe you can have up to 10 associated devices, which include authorised computers (of which you can have up to 5), I suspect the Apple TV might become a temporary associated device while it's in use, but I'm not entirely sure myself.

How many numbers of records can be uploaded using BDC at a time

dear friends,
i want to know that how many numbers of records can be uploaded using BDC at a time from legacy system(database).

no resticsation.
large value of data upload.

How many Multi-Touch points can an iPhone/iPod touch have at the same time?

How many Multi-Touch points can an iPhone/iPod touch/iPad have at the same time?
I am curious as IIRC (but forgot where the article is on the Internet),
if a touch surface is wanted to be able to detect more than 1 touch point at the same time,
then that touch surface needs adding 1 more conductive(?) layer.
(e.g. 2 points -> 2 layers, and so on)
So I wonder how many these layers are on the iPhone / iPod touch / iPad or even the trackpad on every MacBook (Pro).
(correct me if I'm wrong)
Just curious, thanks in advance!

I believe it can only support 2. This article explains how the touch screen works but doesn't explicitly say how many points is supports.
http://electronics.howstuffworks.com/iphone1.htm

Is there any limit on how many records a cursor can hold?

Hi Everyone,
This is Amit here. I want to know whether there is any limit on how many records a cursor can hold.
I have a program in which i am creating a cursor and passing it to another procedure as an input parameter. But the count of cursor query is more than 15 Lakhs. The program is running forever.
Just wanted to know whether the huge data is the problem.
Thanks ....
Regards,
Amit

user13079404 wrote:
Just wanted to know whether the huge data is the problem.What do you think? How long does your code typically need to wait for the data to leave the magnetic platter of the harddisk, travel across wires and into the memory buffer of your application - for a single row?
Now multiply that waiting for I/O time with a million - for a million rows. Or by a billion, for a billion rows.
Is "+huge data+" a problem? Not really - it simple needs more work to get that amount of data from disk. More work means slower performance. It is that simple.
Which is why the row-by-row approach used by many developers is wrong. You do not pull a million rows from disk and process it in PL/SQL or Java or .Net. Heck, you do not even pull 10,000 rows like that.
The correct approach is to think data sets and use SQL to process that for you - and only return the bare minimum of data to the application layer. Maximize SQL. Minimize PL/SQL and Java and .Net.

How many digits in idoc number

hi,
please tell me how many digits in idoc number.
regaerds
subhasis.

Hi,
I believe it is 16 digits..
Thanks,
Naren.

How many attribute views you can be used in analytical view

how many attribute views you can be used in analytical view

Any attribute declared at component level in "Attributes" tab can be used in any methods of the view
WD_COMP_CONTROLLER->attribute
Thanks
Bhanu

How many digital voice ports can Cisco 3663 support ?

Similar Messages

Maybe you are looking for