How many digits in idoc number

hi,
please tell me how many digits in idoc number.
regaerds
subhasis.

Hi,
I believe it is 16 digits..
Thanks,
Naren.

Similar Messages

Where is the serial number on the lightroom cd or box? how many digits is it supposed to be?

where is the serial number on the lightroom CD or box, how many digits is it supposed to be?

If you got it from B&H photo they will correct the problem. Probably way easier to deal with than Adobe. I have used them for years. There used to be (I think still is) a guy at B&H and took care of problems.
Henry Posner [email protected] so next time you call you may want to ask to contact him.

How many digital voice ports can Cisco 3663 support ?

How many digital voice ports can Cisco 3662 support ?
They said "Medium complexity Codecs: 360 (E1)/288 (T1) and High-complexity Codecs: 180 (E1)/144 (T1) "in Cisco 3660 voice gateway data sheet .
But another document said you just configured 4E1 on a Cisco 3660 router .
Which one is true ?

Hi,
There are some other issue except physically accepted number of voice port.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00800921ed.html
page will give you better idea. Even though you can install many voice ports into a router , there is other limits you encounter.
Bets Regards

How to find Outbound Idoc number from inbound Idoc number.

Hi,
I have one inbound Idoc in my system, then
How to find the idoc number from the system which sends that idoc(Outbound Idoc number).

Hello
You can use fm SREL_GET_NEXT_NEIGHBORS for this purpose.
Scenario: An EDI purchase order is received by SAP-XI and forwarded as Inbound ORDERS IDoc to R/3. SAP-XI generates an (outbound) IDoc number which differs from the (inbound) ORDERS05 IDoc in the R/3 system.
Calling fm SREL_GET_NEXT_NEIGHBORS with the following parameters:
OBJECT-OBJKEY = <IDoc number, 16-digits>
OBJECT-OBJTYPE = 'IDOC'
MAX_HOPS = '99'            " <<< get all links
I get the following result:
0000000000133906                                   IDOC       CUSTOMER   OUTIDOC
0000000000407402                                   IDOC                  INIDOC
000000370383                                       BUS2012    CUSTOMER   OUTBELEG
0010057944                                         BUS2032               INBELEG
Outbound IDoc number
Inbound IDoc number (ORDERS05)
PO number
Sales order (created from inbound ORDERS IDoc)
Regards
Uwe

How to get Get IDOC Number for Inbound IDOCS

Hi,
I am using the FM -- IDOC_INPUT_HRMD for creating Inbound IDOCS.
I populate the values for Control Record and Data Record and the IDOC is posted successfully and i get the status 53 in the status Table.
But the problem is the field for IDOC number(DOCNUM in IDOC_STATUS Table of the FM ) is empty.
How can i get the DOCNUM for the IDOC posted as a result of this FM ?
regards,
Siddhartha

Hi Siddhartha,
I think you cannot call IDOC_INPUT_HRMD fm directly from the external program as this fm only handles the application logic part and not the idoc number generation and save part.
So I think you have to call IDOC_INBOUND_SINGLE from your external program and then get the IDOC number.
Then if you need the status records then you need to call another fm and feed IDOC number that you have got from IDOC_INBOUND_SINGLE (there is one IDOC_READ_COMPLETELY but it is not a remote enabled fm)
<b>OK, I just found one RFC enabled fm which you can use,
<b>EDI_DOCUMENT_READ_ALL_STATUS</b></b>
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

How to use the Idoc number.(generated by prgram) and ALE

Hi All
I have a problem to use Idocs. I go thru the following steps but can not able to see the final output.
1.Create Segment ( WE31)
2.Create Idoc Type ( WE30 )
3.Create Message Type ( WE81 )
4.Assign Idoc Type to Message Type ( WE82 )
5.Make a report which gives us Idoc number.
Now my problem is where this Idoc number can we used .and how to relate this with ALE.
Regards
Manoj

Hi Manoj,
Use transaction code we02 or we05 to get the idoc no.
The table used are
EDIDC - Control record
EDID4 - Data record
EDIDS - Status record
Regards
Arun

How to obtain the IDOC number after creation

Hello everyone,
for our master data distribution via report RHALEINI (triggered via a custom report), we have some additional code in BAdI HRALE00OUTBOUND_IDOC, method IDOC_DATA_FOR_RECEIVER_MODIFY.
Everything is working fine so far. Now I need to know the Idoc number after it was created to store it in a customer table together with some additional data. Since the Idoc was not yet created when we're in the method mentioned above, I have to put my coding somewhere else.
Any that's exactly my question: Were could I put my coding? It needs to be executed after MASTER_DATA_DISTRIBUTE since this function creates the idoc in the database.
I though about the following:
- Since RHALEINI is called by a custom report, I might be able to read the idoc number from memory id COMM_HRMD_A (see RHALEINI, line 418).
- Maybe BAdI IDOC_DATA_INSERT could be used for this purpose?
What would be your approach for this?
Thank you in advance.

Hello Markus,
EXPORT comm_control TO MEMORY ID 'COMM_HRMD_A'.
This is a nice observation!
Since RHALEINI is called by a custom report, I might be able to read the idoc number from memory id COMM_HRMD_A
Are you SUBMIT'ting the report RHALEINI in the custom program? If yes, you can access the memory COMM_HRMD_A in your program. To verify this you can check in debug mode if the memory id is populated.
I've checked the report RHALEINI & the internal table comm_control should contain the idoc number!
Maybe BAdI IDOC_DATA_INSERT could be used for this purpose
Only if the previous approach doesn't work out. Remember [K.I.S.S|http://en.wikipedia.org/wiki/KISS_principle]
BR,
Suhas

Where on the box is the serial number? How many digits?

Trying to install Photoshop Elements 12 and need serial number. Three numbers on back of box, none identified as serial number. None are valid. Where is the required number? The help info is useless.

Hi Jim125,
The serial number consists of 24 digits.
Please refer to the below article to locate serial number.
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Thank you for posting on Adobe Forums.

How many digits are there in the S/N for iWork '06?

Im currently trying to find my S/N for iWork since it is asking me to re-enter it. i have 20-digits… seems like that would be too long.

No, we can't give you that level of detail. Resource staffing at Sun, like most companies, is strictly company confidential information.

After update to IOS 7 there is no prompting on the lockscreen of how many digits I have entered allready

Hi,
after I have updated my IPhone 4 from IOS 6 to IOS 7.0.2 there is no propting of the entered PIN digits.
On the Product videos the propting should be shown above the keypad on the lockscreen but only "Code eingeben" is hown there.
Any Ideas?
I have allready restarted my phone with no effect on it.
best regards

Have you tried resetting it:
Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

How to generate a random number with at least 6 digits?

Hi all,
All is in the question. :-)
I would like to generate a random number but the function "random
number" in Labview isn't accurate enough.
Do you know an algorithm to generate a random number of 6 or more
digit?
Thanks,
PF

Hi PF,
It's simple. Use 2 random number functions in the same process. Now you
should have 2 distinct random numbers that have the same accuracy. Let's say
LV gives accuracy up to the thousandth (0.XXX), now if you divide one number
by 1000 and then add to the other number you should then have something like
0.XXXXXX. Actually, LV random number function can give up to about 17 digits
(decimal). If you are looking for more digits (>17 digits), the idea above
may not work, then the last thing you may want try is to generate two or
three random numbers then convert all these decimal numbers to fractional
strings chop off the 0 and dot then concatinate them together. After all
it's still a random number. How many digits do you want to get? Make sure
the indicators acce
pt that many digits?
Good luck
Louis.
P-F wrote in message
news:[email protected]..
> Hi all,
>
> All is in the question. :-)
>
> I would like to generate a random number but the function "random
> number" in Labview isn't accurate enough.
>
> Do you know an algorithm to generate a random number of 6 or more
> digit?
>
> Thanks,
>
> PF

How to pass Idoc number to workfow

Hi all,
How to pass triggered Idoc number to the workfow ?
I wanna to display the Idoc number in mail, when error occur in posting, but workflow is trigarring but I am not able to get the Idoc number, even I given key element as idoc reference to the EDIDC-DOCNUM in the Business object ( z object).
Please let me know how to solve this...
Thanks yaar..
HP

Hi Hp,
Check the Workflow log or the event log?
Check the binding between event container to workflow container?
Thanks and Regards
Balaji E.

Number of digits in Skype number?

I'd like to make a number for Australia.
I'm just wondering how many digits are in a Skype number? And what numbers is the Skype number likely to start with?
Thanks
Solved!
Go to Solution.

H, Ozzibiker, and welcome to the Community,
Such is the life of an on-line Community; sometimes people receive answers almost immediately, whilst others wait days for someone to happen by. Remember, the Community is not officialy a branch of Skype Customer Service as noted in the Community Guidelines
The answer to your enquiry is, it depends. What depends is the country you are calling and what their numbering conventions are. Check this Wikipedia article: http://en.wikipedia.org/wiki/Country_calling_codes
Further, whether the Skype Number is a "local number" or not depends upon from where the person is located who is calling the Skype Number, which is a fixed line number. Ideally, you would take a Skype Number subscription nearest to where most of the people who would be calling it would incur no or as little in the way of toll charges as possible. Of note, for various reasons, Skype Numbers are not available everywhere and for some countries, not at all.
I copied and pasted the information, below, from this website:
http://australia.gov.au/about-australia/our-country/telephone-country-and-area-codes
Country code
The Australian country code is 61. When calling from outside Australia, leave out the leading '0' from the STD area code or from the mobile telephone number.
For example, if you are calling Canberra from outside Australia, first dial your country's international access number, then dial 61, then dial 2, then dial the local phone number.
Area codes
Australia uses 8-digit local phone numbers preceded by a 2-digit STD area code.
02 Central east region (New South Wales, Australian Capital Territory)
03 South east region (Victoria, Tasmania)
04 Mobile telephones (Australia-wide)
07 North east region (Queensland)
08 Central and west region (Western Australia, South Australia and Northern Territory)
Parts of regional New South Wales may also use the 08 and 03 area codes. Parts of regional Victoria may use the 02 area code
For example, if you are calling Canberra from interstate, first dial the STD area code 02, then dial the local phone number.
Hope this helps!
Kind regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Idoc number from personal number in ECC

Hi All,
i am new to idocs ,please tell me how to get the idoc number using the personal number.

https://help.sap.com/saphelp_nw04/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
01. Go to T code We09 or WE10
02.Give date range for Created on
03.Give direction : Inbound or outbound
04.Give basic Type/logical message/ Port etc ( If you know - for faster search )
05. Now next tab is Criteria for search in data record :--
a. You need Segment name : find out segment name from we02 thru some existing / known Idoc .
b. Field name : Fro WE02 can get this value
C. Once you know Segment and field name of personal number - enter all three values and execute.
You will get respective Idoc#
Hope this helps. Let us know if you need further input on this.
Best Regards/Rajesh

IDOC Number

Hi All,
Using a z program,does anyone know how to get the IDOC number generated using the sales order number. We have automatic output determination for this which generates the IDOC.
This there a function module for this...
Thanks in advance,
Finbarr

If you look at transaction WE09, you'll find a program that allows you to search IDocs based on data within segments. Unfortunately, there is no direct link between order num and IDoc num. If you are processing the ALE output immediately, you can use the order create date to help narrow down the selection from EDIDC. If you are running RSNAST00 to process the ALE output, then you can select from NAST to determine approx date and time of IDoc creation.
Once you pull EDIDC records by message type, date/time, you can run through EDID2(or EDID3, EDID4 depending on version) to find your order number.

How many digits in idoc number

Similar Messages

Maybe you are looking for