How many discs should I have for OX 10.3.7?

How many install discs come with OX 10.3.7? I'm wondering if I am missing one because I can't seem to find Safari on my disc and I need to reinstall it. I only have 2 discs Mac OS X Install Disc 1 and Apple Hardware Test AND 2. Mac OX 9 install disc. All the other apps like iPhoto etc seem to be on that first disc but not safari?

dstephendesign,
In another of your Topics you posted;
"I have 2 discs for my Mac mini: 1. a Mac OS X install disc 1 and apple hardware test (mac os verion 10.3.7) AND 2. a Mac OS 9 install disc. "
"Mac mini
Mac OS X Install disc 1
and Apple Hardware Test
Mac OX version 10.3.7
AHT version 1.0
disc version 1.1"
That is a Model Specific system disc, and can only be used on the Mac Mini.
Is that the Panther 10.3.7 disc you are referring to?
If so, which one of your Macs listed below, are you using the disc on?
iMac iBook Mac Mini
Do you have Panther 10.3.x installed on all the Macs?
Was Panther pre-installed, on them when manufactured?
If not, did you use the Full Retail Version, of the Panther Install CDs, to upgrade them?
ali b

Similar Messages

  • Is there a limit to how many pages i can have for one website using muse/business catalyst?

    is there a limit to how many pages i can have for one website using muse/business catalyst?

    Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

  • I have a MacBook Pro 15" mid 2010.  My battery has 326 cycles.  It is not lasting more than 1 hr and a few minutes before needing a charge.  How many cycles should it have?

    I have a MacBook Pro 15" mid 2010 that was purchased in summer of 2010.  My battery has used 326 cyles.  Is this normal for these batteries after two years?  How many cycles should I expect to get out of it before getting a new one?  Also, it only last about 1 hour plus about 30 minutes before needing to be charged again.

    The battery is considered a 'consumable' item by Apple - I know that newer models (not sure about 2010's) are supposed to 'last' to about 1,000 cycle counts. But it all depends on how you've used (or abused) your battery as to how long it's going to last. I've 182 cycles on my 8 month old MBP and my battery 'health' is at 98%: I can still get a good 6 1/2 hours out of it...
    ...if you want more battery time, you're just going to have to buy a new battery or, if you purchased AppleCare, see if Apple will replace it gratis. I doubt that they will, though...
    Clinton

  • How many channels should i need for my 10 pieces of thermocouple?

    1.i need test 10 pieces of thermocouples at one time,so how many channels do i need? are 8 channels enough(SCXI-1112) of i must use 32 channel(SCXI-1102)?
    2.I only need test 3 LVDT signals and 3 strain guage signal(must full bridge),do you have 4 channels' LVDT module and 4 channels' Strain/bridge module(full bridge)?
    3.if i hug all these sensors to the signal conditioning,does that mean my DAQ should have at least 16 Analog inputs,beside do you have 12-bit DAQ?

    dittoit,
    1. If you need to measure 10 thermocouples, then you will need at least that many differential channels. So the 1102 would be best.
    2. The current LVDT module we offer is the 1540 which has 8 Channels as does the 1520 which is the best strain gauge module.
    3. The measurements from the SCXI Chassis will normally be multiplexed to one channel on the DAQ card. Any of our E-Series (except the Basic DAQ) will control. Our E-Series card can be either 12-bit or 16-bit.

  • How many cards should I apply for ?

    So, recently, I applied for 2 new cards ( both with capital one) and got approved for both ( credit score is 621). Currently, I have 5 inquries on my credit report, hence, I'm wondering should I apply for one additiona card? Alternatively, should I simply build my scores higher in order to get a better card in the future? Thanks!

    SuperMarioTex wrote:
    Sure! Experian is 621, and 602, 600 ( Trans/Eq).  Currently, I have a Wells Fargo Secured Card ( $300 Limit), which is almost 3 years old (long time for secured I know).  The two new capital one cards both have $1,000 limits.  I still have 3-4 baddies ( small amount med collections) that I will get removed within in the next 2-3 months via PFD.  Additionally, I have a judgement ($1,800), which is 6 years old reporting on both Trans/EQ. Thanks for the detailed info.  Don't apply for any more cards until the 3-4 baddies come off your report in the next 2-3 months.  Once those come off, you will see a rise in score which will make you be able to get some really good cards. For now, work on the baddies.  Congrats on the 2 CAP 1 approvals...

  • I purchase kjv audio completed bible by zondervan how many parts should I have received to complete the audio bible

    I PURCHASE THE KJV COMPLETE BIBLE DRAMATIZED AUDIO BY ZONDERVAN MY ORDER NUMBER IS MGN5JNX1Q8 PURCHASE DATE IS AUGUST 7, 2011 THE UNIT PRICE $47.95. WHAT I NEED TO KNOW IS HOW MANY PARTS FROM THE PRODUCTS COMPLETES THE BIBLE.  DOWNLOADED ONTO MY IPAD WAS 11 PARTS.  WHAT IS THE CORRECT AMOUNT OF PARTS.  RESPOND ASAP  THANK YOU. EMAIL [email protected]

    This is from the Pixel Bender Language Reference:
    "pixel1: Represents the value of one channel of an image. The name distinguishes this
    single-element pixel from a pixel that contains multiple channels. Pixel values are
    assumed to be 32-bit floating point numbers."
    32 bits = 4 bytes
    So a channel is four bytes rather than the one you assumed. So this should explain the difference.

  • How many paper should i have to give for certification

    hi all,
    i have heard a news that for ABAP Certificaion,threre are three paper i-e,
    1)Begginer.
    2)Associate.
    3)Professional.
    Is it right or wrong.kindly update me so i'll prepare for my exam.
    Thanks,

    For any kind of certification in SAP, you need to just take one certification test.
    The "papers" that you mentioned are actually levels.
    If you are a fresher, please go for the "Associate" level certification.
    Similarly, depending on your experience, you can go for other levels directly.
    Please note that you need not pass 3 "papers" or "levels" to be certified.
    Every level in itself is a certification.
    Request you to contact SAP India Office at the given numbers on above link. Or contact any Authorized Training Center in your city.
    Rgds,
    Zub

  • How many accounts should you have on your system?

    It might sound stupid but I have had my iBook for like 5 years and have always only had one account. This is an admin account that I called my name (not admin) with a completly different short name. I have searched these discussions and have not yet found the answer to my question. Since I am awaiting my new MacBook which is currently on the west coast (thanks FedEx tracking), I want to be completely prepared when it arrives. Having said that, is there a problem with having only one account on my iBook now that will effect the migration of my info to the new MacBook? And if so, what should I do about it? Thankx in advance for your help
    iBook   Mac OS X (10.4.7)   Waiting for my new MacBook

    Can you explain this to me:
    I do turn on the OS X
    built-in firewall to protect against unwanted
    intrusion from the Internet.
    I am also awaiting a LaCie external HD so when I get that I was going to use Carbon Copy Cloner to "back up" everything to the LaCie before the migration. Or is what you talk about below a better idea? I do back up, some stuff to iDisk and some stuff to CDs and really important stuff to both. I hate to say it but I don't have a complete backup of EVERYTHING. That was one reason I am getting the LaCie.
    If you do not do so, now would be a good time to have
    a backup/retreat strategy. I make bootable clones of
    my iMacs on an external firewire drive using a little
    program called SuperDuper ($28 US at
    www.shirt-pocket.com). I always make a clone prior
    to any software change. In that way, I have an
    almost foolproof way to retreat if something goes
    wrong with my software or hardware.
    Thankx again
    Jacque
    iBook   Mac OS X (10.4.7)   Waiting for my new MacBook
    iBook   Mac OS X (10.4.7)   Waiting for my new MacBook
    iBook   Mac OS X (10.4.7)   Waiting for my new MacBook

  • How many apps can you have for sale with a CC Complete membership? (Not Pro or Enterprise)

    I have the CC complete membership (£46 p/m) I was under the impression I could only have 1 app for sale on the Apple store with this. But I've re-read the guidelines and it says I can have unlimited apps. I've been working on an ipad app, which has ended up exceeding the 100mb limit (I think this limit is new, too) But my app could be divided up logically into 2 or 3 apps for individual publication, so long as each has the $99 fee paid. Do my conclusions sound right, or have I missed something?

    >for sale on the Apple store
    This is Adobe... I think you need to ask Apple about their store policies

  • Hi all,how many discs should be in the CS3 set ?

    I have CS3, Onlocation, and Video Workshop. But there is an empty space in the box !
    Thanks,
    Ian

    I skipped CS3 so I can't check a box, but...
    these downloadable trial installation files are
    the equivalent of the installation disks for CS3.
    Adobe CS3 / CS4 Trial Downloads: Direct Links
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Be sure to read "Note: Very Important Instructions".
    If you already own a license for any of these CS3 versions,
    these Trial downloads can be authorized and updated online
    by using your existing serial number(s).
    Perfect for backing up your boxed DVDs.

  • How many tasks can I have in NI-DAQmx system?

    I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
    I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free).  For hardware we'll use your PXI modules (because your hardware is ultra-reliable).  I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand.  I am doing the system software architecture now.  I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
    The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels.  Help hasn't helped much.  Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way. 
    We want something much more akin to random access memory.  We'll have UUTs of different kinds coming on and off at random times.  Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s.   It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
    I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) .  It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
    In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq.  Even with two devices, can I only have one analog input task running?  Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
    I'll also have Daq digital IO and two 6509 digital io modules.  Do I have to cram all of that into some "task" concept too?  The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output).  How many tasks can I have for that stuff?  On the DMM card I can measure capacitance amoung other things.  Will I have a capacitance task?  The idea of a "capacitance task" hurts my head.
    Golly I hate tasks.  Please help.
    I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
    Dave

    Dave,
    Thanks for posting to the NI Forums.
    For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email.  If you want to move to email support I recommend contacting NI through the email route.
    I will answer your questions here.  If you need more direct contact please feel free to contact us through [email protected].
    For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple.  A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.)  and a single timing configuration (sampling rate, continuous vs. finite, etc.).  It is a way to organize configuration data.  
    The concept of a task is an abstraction like OO programming.  Like OO programming it may take some time to understand but can be a time saver in the end.  Also like OO programming it does add some initial programming overhead.  It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
    With very simple applications OO programming sometimes does not make sense.  But as a program gets more and more complex OO programming becomes more and more useful.  It takes some learning but it is worth it.
    I believe the concept of a task does the same thing.  It does not change the actual functionality of the device or add excessive overhead.  It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
    Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations.  You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time.  In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate).  You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
    The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation.  There is a single timing engine for AI, one for AO, and so forth.  You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
    However, tasks can exist even when they are not being actively run.  You can create all the tasks you need at the beginning of your program and simply start and stop them as you need.  After the task is stopped you do not need to clear the task until the end of your program.  You can further increase performance by moving the Task into the latest state possible without actually starting the task.  This can be done by calling myTask.Control(TaskAction.Action).  The Task states are further explained in the NI-DAQmx Help Manual.
    The concept of a  task will need to be used with any device that is being programmed using NI-DAQmx.  The 6259 and 6509 will need to be programmed using DAQmx.  With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API.  The SWITCH API does not use the concept of tasks.  For the 4072 you will need to use the NI-DMM API.  This API also does not use the concept of tasks.
    Hopefully this information is helpful.  Let me know if you have any additional questions or concerns.
    Regards,
    Neil S.
    Applications Engineer
    National Instruments

  • How many discs does the imac come with?

    How many discs should the imac come with when first bought and what are they?

    Lovely collection of tags there. How does the question relate to iPhoto?
    Regards
    TD

  • I have been requested the certificate for iOS development since 4 days ago, but the result is still pending approval. So how many days should i wait?

    i have been requested the certificate for IOS Development since 4 days ago, but the result is still pending approval. So how many days should i wait?

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • How many hours do I have to charge my iphone 5 for the first time?

    i just bought an iphone 5 and I want to know how many hours do i have to charge it in the first charge. Thanks you very much for all your answers.

    You don't need to charge it unless you want to or it needs it.  You can and should charge as often and as long as possible... deep discharges are hard on lithium batteries.  Normal mobile use will result in the one charge cycle/month that Apple recommends.
    http://www.apple.com/batteries/iphone.html

  • How many emails can I have on my account? Can I have client folders to customize for each client?

    How many emails can I have on my account?
    Can I have client folders for each client to access their own survey/forms?
    Can I customize for each client?
    Do we need multiple subcription accounts for this?

    You need to have one FormsCentral subscription per email.
    At this time FormsCentral doesn't support folders.
    Gen

Maybe you are looking for