How many EoIP tunnels at the same time? (One Anchor -- HA Pair )

Hi Experts,
With AP SSO, there should be two CAPWAP tunnels between an AP and the HA controller pair at the same time. Is it correct?
Then how many EoIP tunnels between the internet anchor controller and the foreign controller HA pair at the same time?
Thanks
Cedar

Hi Cedar,
in AP SSO, only single CAPWAP tunnel maintan at a time & see the below reference for details.
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml
There is only one CAPWAP tunnel maintained at a time between the APs and the WLC that is in an Active state. The overall goal for the addition of AP SSO support to the Cisco Unified Wireless LAN was to reduce major downtime in wireless networks due to failure conditions that may occur due to box failover or network failover.This allows the access point (AP) to establish a CAPWAP tunnel with the Active WLC and share a mirror copy of the AP database with the Standby WLC. The APs do not go into the Discovery state when the Active WLC fails and the Standby WLC takes over the network as the Active WLC.
in the same sense, EoIP tunnel limitation will be 71 for a anchor controller. See below
https://supportforums.cisco.com/thread/2123756
HTH
Rasika
*** Pls rate all useful responses ****

Similar Messages

Windows 7 desktop install - how many portal users at the same time?

If I install spice works on a windows 7 desktop machine that is part of a network, is there a limit to the number of machines that can simultaneously access the user portal and create a ticket ?
thanks
Dan
This topic first appeared in the Spiceworks Community

Please take a look at:
https://wiki.mozilla.org/Enterprise
The resources section at the bottom may have information you are interested in.

How you create a group to send many txt msg at the same time?

How you create a group to send many txt msg at the same time?

The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

How many users can view the same report at the same time in obiee answers

Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.

Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth

I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
How many Apple IDs can I have per device?
I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
I may load apps under a school Apple ID and have users load their own apps under thier own ID.
How many devices can have the same Apple ID?
Can I use the same Apple ID on all the computers in a lab?
Can I use the same Apple ID on all iPads for a particular grade level?
Are the rules different for iOS devices and computers?
I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
To make my life easier, I'd like 200 devices to all use the same Apple ID.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

How many computers can share the same iTunes account?

How many computers can share the same iTunes account?

Hello cincip,
Thanks for the question, and welcome to Apple Support Communities. The following article provides more information on associating multiple computers with your Apple ID:
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/HT4627
Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.
Thanks,
Matt M.

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

CS3 Camera Raw Too Many Files Open at the Same time alert!!!

Please help me. I keep getting this error message in Camera Raw that says there are too many files open at the same time - but I only have 100 open:( Please help - I was getting this error with CS2 and thought upgrading to CS3 would fix it and it didn't!!!

> "10 or 100 - you can quickly go through a stack of images in ACR and make any desired changes you want. Whether making the same or similar adjustment to similar files, or making radically different adjustments to different images as appropriate".
I've done this with far more than 100! I think my maximum is 425 raw files, invoking ACR from Bridge without Photoshop even loaded, and it worked well. (I've also done 115 JPEGs in order to crop them under extreme time constraints).
It can be very slick. For example, if I use a ColorChecker a number of times in a shoot, it is easy to select just the set (perhaps 100 or so) that a particular ColorChecker shot applies to and set the WB for all of them.
Furthermore, in case people don't know, you can set ratings on raw images while many of them are open in ACR. (Just click under the thumbnail). It isn't as powerful as Lightroom, but it is not to be dismissed.
I suspect that it is possible to apply sensor-dust-healing to lots of images in the same way, and certainly it is easy to apply presets based on various selections.
Perhaps with AMG (Adobe Media Gallery) it will be sensible to use the above capability to process 100s of raw files, then create a set of web pages for the best of them, in not much more time than it would have taken in Lightroom. I judge that Lightroom is the "proper" tool for the job (perhaps after 1.1!), but Bridge+ACR can go a long way.

Any way to play two clips at the same time one over the other? (transprent)

Any way to play two clips at the same time one over the other? (transprent)

Yes.
See the information here for a variety of ways to do this:
http://discussions.apple.com/thread.jspa?threadID=933500&tstart=50
http://discussions.apple.com/thread.jspa?threadID=903151&tstart=0
http://karsten.schluter.googlepages.com/jackiechancredit
http://www.geethree.com/slick/V_04.html

The DSO is included in two deamon processes how can i load at the same time

Hi Gurus,
i am working on BI7.0 and our application is based on RDA(real time data acquisition) and we are pushing the data using web services and the problem is now we have a DSO which is included in 2 deamon processes and its allowing us to load after the completion of first one.i just want to load them parallely and want to execute at the same time to the DSO.so please let me know how can it be possible and how we can achieve this..
your help will be appreciated greatly..
Thanks & Regards.
Ashok

Hi
We managed this requirement by closing the DTP request. You have to ask your ABAP team to code this closing.
Thanks and regards
Kwong Tat

Connectivity issues because of many users on at the same time.

I notice this has been getting worse and worse, and last night my wife almost didn't get on in time to finish a college assignment.My wife noticed that there were about 7 or 8 people online at the same time. It seems anytime there are 5 or more we cannot connect at all.
After a few hours we noticed there were only 2 people online, and what do you know we got on right away. Is it possible that over the years we have exceeded our bandwidth and now are just too overloaded? It sure seems that way, and was pretty much proven last night.
Is there anything I can do about this? love to switch to FIOS ,but I'm afraid our mayor is in bed with Comcast (so to speak), so chances of getting FIOS here are pretty much nonexistant.

Without knowing which router you have (Verizon has supplied several different DSL router/modems), it is hard to give specific directions for your specific router.
1). You can determine your speed by connecting to your router (http://192.169.1.1) and logging in.
Usually the user id is Admin and the password is passwd or password, but on some routers there is a sticker that identifies the password. If nothing works, try reseting the router. Once you are logged in, print out the 'transceiver stats', that will tell you what the speed on the link between you and the central office is. If you post that information, we can also tell you if your line can support a higher speed than you currently have.
2). Once you are connected to the router, you can also check the wireless settings. If you have never set it up, it may be an unsecured network, in which case anyone can use it. You probably want to change that. While everyone says how wonderful WPA2 is, the reality is that any security, even WEP will very effectively discourage and effectively prevent others from using your wireless network.
Good luck.

Entry of time sheets by many personnel numbers at the same time

Hi
I have a requirement from the client where time sheets to be entered by a group of employees at the same time.
2. The employee should enter the time sheet from any place out of office may be internet outside ie web enabled time sheet.
Please suggest me how to perform the above two things in the CATS.
waiting for your suggestions.
Thanks
Harish

One of them.
What about the statement in the docs isn't clear?
atomic_refresh
If this parameter is set to true, then the list of materialized views is refreshed in a single transaction. All of the refreshed materialized views are updated to a single point in time. If the refresh fails for any of the materialized views, none of the materialized views are updated.
If this parameter is set to false, then each of the materialized views is refreshed in a separate transaction.Each one becomes a separate transaction. Some may run in parallel, some serially, you have no control. So it may well be one at a time. The bigger issue, if they are separate transactions, is that if someone queries one the corresponding data may not exist in the others. Is this what you want?

How to run two vi's at the same time, one uses an AI task with 8 AI channels the other a single AI and AO channel???

Hello Everyone,
Here is my situation. I have one vi that is reading an AI task of 8 channels AI0 --> AI7 (one sample on demand) and also has control of all of the digital outputs on the board. My problem is that I want to run another vi that will use the last AI channel AI8 and an AO channel AO0. These two vi's do not need to know anything about one another but I do need them both to be running at the same time. Currently when I try running the two vi's together both vi's crash and I get an error message stating that the AI8 pin is reserved. AI8 is not part of the task and is not refrenced anywere in the larger vi. I am assuming that this problem is do to the fact that the larger vi is occupying the DAQ board, cycling through the task when the smaller vi is requesting data from AI8 and the DAQ board cannot do two things at once. The sampling rate on the smaller vi is not really that important. Is there anyway I can get the smaller vi to read from AI8 and not crash??? Software and Hardware listed below. Thanks in advance for any suggestions.
PCI-6221
Labview 7.1

Hi steve ,
Sorry to say that you cannot configure and acquire from AI channels on a Device simultaineously from 2 seperate VI's.
regards
Dev

Two Firefox at the same time, (one with images, other without)?

Hi,
Is is possible to use two firefox browsers at the same time, the one with images enabled, the other disabled?

See this easy to follow directions:
http://www.callum-macdonald.com/about/faq/multiple-firefox-instances/

How many instances can access the same queue at the same time ?

Hi,
In my application I am cloning a VI n times and these n instances are accessing the same queue. Is there any restriction on this 'n' for successful operation.
Regards,
Runjhun

Runjhun,
If the accesses are to enqueue data, then no limit (beyond the number of VIs which will fit in memory). If you are dequeuing, then n =1. Dequeue removes data from the queue and you would have no way to know which of the n VIs got which element from the queue. Read the deteiled help for the queue functions. If you need to read the same data in multiple places, you need some other mechanism.
Please tell us more about your application. What kind of data and how much data are in the queue? How fast is the data being generated? How long must the data persist (be availabel after it is generated)? Do you need to guarantee that all the VIs get the data?
Lynn

How many EoIP tunnels at the same time? (One Anchor -- HA Pair )

Similar Messages

Maybe you are looking for